| “This site contains affiliate links for which OEMDTC may be compensated” |
September 13, 2018 NHTSA CAMPAIGN NUMBER: 18V626000
Electronic Parking Brake may Fail
A vehicle rollaway can increase the risk of a crash.
NHTSA Campaign Number: 18V626
Manufacturer Subaru of America, Inc.
Components PARKING BRAKE
Potential Number of Units Affected 27,175
Summary
Subaru of America, Inc. (Subaru) is recalling certain 2010-2014 Subaru Legacy and Outback vehicles equipped with a manual transmission. The electronic parking brake (EPB) may not engage as intended, allowing the vehicle to rollaway if the transmission is not in the proper gear when parked.
Remedy
Subaru will notify owners, and dealers will replace the EPB actuator assembly, free of charge. The recall began July 19, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru’s number for this recall is WTV-81.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Subaru has a Recall
NUMBER: WTV-81R
NHTSA ID: 18V-626
DATE: 10/30/18
REVISED: 08/26/19
| APPLICABILITY: | 2010-2014 MY Legacy and Outback (M/T models) |
|---|---|
| SUBJECT: | Electronic Parking Brake (EPB) Actuator |
INTRODUCTION:
Subaru of America, Inc. (Subaru) is recalling all 2010-2014 model year Legacy and Outback vehicles equipped with a manual transmission (M/T), to replace the electronic parking brake (EPB) actuator assembly. A total of 27,175 U.S. vehicles are affected by this recall.
Vehicles equipped with an automatic transmission are not affected by this recall. However, they will be covered under an extended warranty. Details of the extended warranty coverage will be forthcoming.
AFFECTED VEHICLES:
| Model Year | Carline | Production Range |
| 2010-2014 | Legacy equipped with M/T | All M/T |
| 2010-2014 | Outback equipped with M/T | All M/T |
Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com. This information is available.
DESCRIPTION OF THE ISSUE AND SAFETY RISK:
Due to improper manufacturing processes, a capacitor on the circuit board and/or the actuator stroke sensor magnetic ring located in the control unit of the EPB may crack over time. If either component develops a crack, the brake telltale warning lamp will illuminate, and the EPB may not apply as intended.
If the manual transmission (M/T) shift lever is not in the recommended gear when the vehicle is parked and the EPB does not engage, the vehicle may roll away, increasing the risk of a crash.
DESCRIPTION OF THE REMEDY:
Once parts are available, the EPB actuator assembly will be replaced on all 2010-2014 model year Legacy and Outback vehicles equipped with a manual transmission (M/T).
RETAILER RESPONSIBILITY:
Retailers are to promptly perform the applicable service procedures to correct all affected vehicles in their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken into retailer inventory, or in for service, necessary steps should be taken to ensure the recall correction has been made before selling or releasing the vehicle.
Until this repair is performed, please advise owners of the information and parking tips listed below, which are also described in the owner’s manual. Until this repair can be performed, the driver should do the following when parking the vehicle:
- Whenever possible, park the vehicle in a flat location.
- When parking uphill, the front wheels should be turned away from the curb as shown. Also, be sure to shift the M/T shifter into first gear when parking uphill.
- When parking downhill, the front wheels should be turned into the curb as shown. Also, be sure to shift the M/T shift lever into reverse gear when parking the vehicle downhill.
- Apply the electronic parking brake (EPB) by depressing the brake pedal and pressing the parking brake switch firmly.
Under normal operating conditions, the brake system warning light illuminates with the parking brake applied while the ignition switch is in the “ON” position. The light turns off when the parking brake is released.
However, the brake system warning light flashes when the EPB system is malfunctioning. If the brake system warning light flashes, the driver should park the vehicle in a safe location as soon as possible, taking the above precautions, and contact a Subaru retailer.
OWNER NOTIFICATION:
Interim owner notification letters were sent by first class mail in November, 2018, advising of this recall and that parts were not yet available.
Now that parts are available, the affected owners will be notified again by mail on or around July 15, 2019, and by email if a valid email address is on file.
RETAILER AFFECTED VIN LISTS:
Each Subaru retailer will receive an affected VIN list from their Zone Office when owner renotification begins. Vehicles will be assigned to retailers in the affected VIN list as follows:
- Original vehicle owners are assigned to the original selling retailer when their current address is within a 100-mile radius of that retailer.
- If the original selling retailer is inactive, the VIN has been assigned to the nearest active retailer.
- For any new owners or when original owners live more than 100 miles from the original selling retailer, the VIN has been assigned to the nearest active retailer.
IMPORTANT: Retailer affected VIN lists include information for vehicles affected by this recall. This information will enable retailers to follow up with owners of affected vehicles. The lists contain owners’ names and phone numbers obtained from State Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is unlawful. Accordingly, retailers are required to limit the use of these lists for the sole purpose of completing this recall.
PART INFORMATION:
| Description | Part Number | Application |
| ACTR ASSY EPB | 26002AJ04A | 2010-2012MY M/T |
| 26002AJ05A | 2013-2014MY M/T | |
| SELF-LOCK NUT | 023508000 | All, Qty. 4 / vehicle |
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The existing service procedure for replacing the EPB actuator assembly remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related onetime-use parts needed for a complete and lasting repair.
ADDITIONAL SERVICE PROCEDURE TIP:
As part of reassembly, after installing the brake rotors, the parking brake must always be re-adjusted BEFORE attempting to perform the Force Sensor Calibration Mode procedure.
IMPORTANT: Failure to perform the following parking brake adjustment procedure may cause DTC(s) (e.g. C0271, C0253 and / or C0251) to set and create difficulty with completing the Force Sensor Calibration Mode procedure successfully.
Adjustment Procedure:
- Remove the adjusting hole cover from the disc rotor.
- Insert the flat tip screwdriver (b) into the brake adjustment hole (A) and rotate the adjusting screw (a) until the brake shoes contact the disc rotor (c).
- Loosen the adjusting screw by 5 notches in the opposite direction of the arrow.
- Operate the parking brake several times then confirm there is no brake drag.
- If the adjusting screw is not loosened sufficiently, brake dragging may occur.
- Install the adjusting hole cover to the disc rotor.
- Install the rear wheels, lower the vehicle onto level ground, connect the SSM then proceed with performing the Force Sensor Calibration Mode procedure.
IMPORTANT NOTES:
- Due to the age of some of these affected vehicles, before beginning disassembly, it is STRONGLY recommended to clean any loose rust or corrosion from the exposed threads and apply a penetrating lubricant to hardware that needs to be removed before disassembly. Using Hand Tools Only is also STRONGLY recommended for this procedure.
- AS LONG AS THERE WAS NO CUSTOMER CONCERN OF AN EPB FAILURE, removed EPB assemblies can be scrapped when the repair is complete.
- IF THE CUSTOMER REPORTED THE EPB FAILED AT ANY TIME, the removed EPB assembly must be held for the standard parts holding period AND a QMR submitted with details of the alleged EPB failure.
- Any failed replacement parts (new part installed that later fails) must be held for the standard parts holding period.
| Part Number | Applicability | Description | Order Quantity |
| MSA6P1302 | All Models | Campaign Completion Labels (contains one sheet of 20 labels) | 1 |
SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identification Label.
The completed label should be attached to the vehicle’s upper radiator support.
Additional labels are available through normal parts ordering channels. The part number is MSA6P1302, which comes as one sheet of 20 labels.
CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers may submit claims through Subarunet.com.
| Labor Description | Labor Operation # | Labor Time | Fail Code | Claim Type |
| WTV-81- EPB Actuator Assembly Replacement | A154-421 | 1.3 | WTV-81 | RC |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists in certain 2010-2014 model year Legacy and Outback vehicles equipped with a manual transmission (M/T). These vehicles are also equipped with an electronic parking brake, which is operated by pushing or pulling the parking brake switch. You received this notice because our records indicate that you currently own one of these vehicles.
REASON FOR THIS RECALL:
Due to improper manufacturing processes, a capacitor on the circuit board and/or the actuator stroke sensor magnetic ring located in the control unit of the electronic parking brake (EPB) may crack over time. If either component develops a crack, the brake system warning lamp will flash, and the EPB may not apply as intended.
If the manual transmission (M/T) shift lever is not in the recommended gear when the vehicle is parked and the EPB does not engage, the vehicle may roll away, increasing the risk of a crash.
Remedy parts are not yet available.
Subaru is in the process of acquiring the parts necessary to perform this repair. Once there is a sufficient supply of parts available, Subaru will contact you again by mail advising you to proceed with scheduling an appointment with your Subaru retailer (dealer). We expect parts to be available in the second quarter of 2019.
PRECAUTIONS TO TAKE UNTIL THE REPAIR CAN BE PERFORMED:
Until this repair can be performed, please do the following when parking your vehicle:
- Whenever possible, park your vehicle in a flat location.
- When parking uphill, the front wheels should be turned away from the curb as shown. Also, be sure to shift the M/T shifter into first gear when parking uphill.
- When parking downhill, the front wheels should be turned into the curb as shown. Also, be sure to shift the M/T shift lever into reverse gear when parking your vehicle downhill.
- Apply the electronic parking brake (EPB) by depressing the brake pedal and pressing the parking brake switch firmly
To release the EPB, pull the parking brake switch toward you while the ignition switch is in the “ON” position with both the brake pedal and clutch pedal depressed.
Under normal operating conditions, the brake system warning light illuminates with the parking brake applied while the ignition switch is in the “ON” position. The light turns off when the parking brake is released.
However, the brake system warning light flashes when the EPB system is malfunctioning. If the brake system warning light flashes, park your vehicle in a safe location as soon as possible, taking the above precautions, and contact your Subaru retailer.
WHAT SUBARU WILL DO:
When remedy parts are available, Subaru will replace the electronic parking brake (EPB) actuator in your vehicle at no cost to you. Subaru will notify you again by mail when remedy parts are available, advising you to proceed with scheduling an appointment with your Subaru retailer.
CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?
If you have moved or sold your vehicle, please complete the enclosed prepaid postcard and mail it to us. Or if you prefer to update this information online, please go to www.subaru.com, select ‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the drop-down menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR:
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement. Reimbursement consideration will be based on the amount an authorized Subaru retailer in your area would charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage at the time of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing address and telephone number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WTV-81 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt to process your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be completed.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’ For additional information, please go to: https://www.wtv81.service-campaign.com.
If you need additional assistance, please contact us directly:
- By e-mail: Go to: www.subaru.com and select “Contact Us”.
- By telephone: 1-844-373-6614 Monday through Friday between 8:00 a.m. and 7:00 p.m. ET.
- By U.S. Postal mail: Write us at:
Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification E-mail System, please go to: https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration (NHTSA), 1200 New Jersey
Ave., SE, Washington, DC 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-4249153) or go to https://www.safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
Notice to Lessors: Under Federal law the lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s) within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the applicable vehicle identification number (VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A leased vehicle is a vehicle leased to another person for a term of at least four months.)
A subsidiary of SUBARU CORPORATION
OWNER NOTIFICATION LETTER
IMPORTANT SAFETY RECALL
This notice applies to the VIN below Subaru of America, Inc
Subaru Recall WTV-81
NHTSA ID 18V-626
July 2019
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists in certain 2010-2014 model year Legacy and Outback vehicles equipped with a manual transmission (M/T). These vehicles are also equipped with an electronic parking brake, which is operated by pushing or pulling the parking brake switch. You previously received a letter informing you of this recall, stating that the remedy parts were not yet available.
This letter is to inform you that parts are now available.
REASON FOR THIS RECALL
Due to improper manufacturing processes, a capacitor on the circuit board and/or the actuator stroke sensor magnetic ring located in the control unit of the electronic parking brake (EPB) may crack over time. If either component develops a crack, the brake system warning lamp will flash, and the EPB may not apply as intended.
If the manual transmission (M/T) shift lever is not in the recommended gear when the vehicle is parked and the EPB does not engage, the vehicle may roll away, increasing the risk of a crash.
WHAT SUBARU WILL DO
Subaru will replace the electronic parking brake (EPB) actuator in your vehicle at no cost to you.
WHAT YOU SHOULD DO
You should contact your Subaru retailer (dealer) for an appointment to have the electronic parking brake (EPB) actuator replaced in your vehicle, free of charge. To minimize your inconvenience while the repair is being performed, please ask your retailer for alternative transportation options.
PRECAUTIONS TO TAKE UNTIL THE REPAIR CAN BE PERFORMED
Until this repair can be performed, please do the following when parking your vehicle:
- Whenever possible, park your vehicle in a flat location.
- When parking uphill, the front wheels should be turned away from the curb as shown. Also, be sure to shift the M/T shifter into first gear when parking uphill.
- When parking downhill, the front wheels should be turned into the curb as shown. Also, be sure to shift the M/T shift lever into reverse gear when parking your vehicle downhill.
- Apply the electronic parking brake (EPB) by depressing the brake pedal and pressing the parking brake switch firmly
To release the EPB, pull the parking brake switch toward you while the ignition switch is in the “ON” position with both the brake pedal and clutch pedal depressed.
Under normal operating conditions, the brake system warning light illuminates with the parking brake applied while the ignition switch is in the “ON” position. The light turns off when the parking brake is released.
However, the brake system warning light flashes when the EPB system is malfunctioning. If the brake system warning light flashes, park your vehicle in a safe location as soon as possible, taking the above precautions, and contact your Subaru retailer.
HOW LONG WILL THE REPAIR TAKE?
The time to perform this repair is less than 90 minutes. However, your retailer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time.
CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?
If you have moved or sold your vehicle, please update this information online at www.subaru.com, select ‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the drop-down menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement. Reimbursement consideration will be based on the amount an authorized Subaru retailer in your area would charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage at the time of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing address and telephone number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WTV-81 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt to process your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be completed.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’
For additional information, please go to: https://www.wtv81.service-campaign.com.
If you need additional assistance, please contact us directly:
- By e-mail: Go to www.subaru.com and select “Contact Us”
- By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
- By U.S. Postal mail: Write us at Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification email System, please go to: https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration (NHTSA), 1200 New Jersey Ave., SE, Washington, DC 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www. safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
Notice to Lessors: Under Federal law the lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s) within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the applicable vehicle identification number (VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A leased vehicle is a vehicle leased to another person for a term of at least four months.)
A subsidiary of SUBARU CORPORATION
10 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| SUBARU | LEGACY | 2010-2014 |
| SUBARU | OUTBACK | 2010-2014 |
18 Associated Documents
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-18V626-0082.pdf 658.579KB
Loading...
Reload document 
Open in new tab
Manufacturer Notices(to Dealers,etc)- UPDATE Subaru Safety Recall: WTV-81 EPB Actuator Assembly
RCMN-18V626-7663.pdf 366.534KB
Loading...
Manufacturer Notices(to Dealers,etc)- 2010 – 2014 model year Legacy and Outback M/T vehicles Electronic Parking Brake Actuator Recall Bulletin: WTV-81
RCMN-18V626-4493.pdf 154.827KB
Loading...
Recall Acknowledgement
RCAK-18V626-9388.pdf 290.988KB
Loading...
Defect Notice 573 Report
RCLRPT-18V626-6691.pdf 216.452KB
Loading...
Manufacturer Notices(to Dealers,etc)- Subarunet Announcement – New Subaru Safety Recall: WTV-81 EPB Actuator Assembly
RCMN-18V626-0674.pdf 360.768KB
Loading...
Recall 573 Report – AMENDMENT 1
RCLRPT-18V626-6575.PDF 216.451KB
Loading...
Remedy Instructions and TSB
RCRIT-18V626-0981.pdf 481.465KB
Loading...
Remedy Instructions and TSB
RCRIT-18V626-0127.pdf 477.464KB
Loading...
Remedy Instructions and TSB
RCRIT-18V626-4212.pdf 517.414KB
Loading...
Recall 573 Report – AMENDMENT 2
RCLRPT-18V626-7100.PDF 214.545KB
Loading...
Manufacturer Notices(to Dealers, etc.) UPDATE: Subaru Safety Recall WTV-81 EPB Actuator Assembly – Parts are available.
RCMN-18V626-2330.pdf 154.562KB
Loading...
Remedy Instructions and TSB
RCRIT-18V626-5267.pdf 519.343KB
Loading...
Miscellaneous Document – Owner Letter Email
Loading...
Manufacturer Notices(to Dealers,etc)- July 18, 2019 OWNER NOTIFICATION: Subaru Safety Recall WTV-81 EPB Actuator Assembly
RCMN-18V626-2389.pdf 136.348KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-18V626-4238.pdf 251.348KB
Loading...
Remedy Instructions and TSB
RCRIT-18V626-2438.pdf 592.361KB
Loading...
Remedy Instructions and TSB
RCRIT-18V626-5279.pdf 489.302KB
Loading...
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V626&docType=RCL
NUMBER: WTV-81R
NHTSA ID: 18V-626
DATE: 10/30/18
REVISED: 08/26/19
https://www.nhtsa.gov/recalls?nhtsaId=10164443
https://static.nhtsa.gov/odi/tsbs/2019/MC-10164443-0001.pdf
Loading...
NUMBER: WTV-81R
NHTSA ID: 18V-626
DATE: 10/30/18
REVISED: 07/17/19
https://www.nhtsa.gov/recalls?nhtsaId=10162886
https://static.nhtsa.gov/odi/tsbs/2019/MC-10162886-0001.pdf
Loading...
NUMBER: WTV-81R
NHTSA ID: 18V-626
DATE: 10/30/18
REVISED: 06/14/19
https://www.nhtsa.gov/recalls?nhtsaId=10163007
https://static.nhtsa.gov/odi/tsbs/2019/MC-10163007-9999.pdf
Loading...
NUMBER: WTV-81
NHTSA ID: 18V-626
DATE: 10/30/18
https://www.nhtsa.gov/recalls?nhtsaId=10150951
https://static.nhtsa.gov/odi/tsbs/2018/MC-10150951-9999.pdf
Loading...
NUMBER: WTV-81
NHTSA ID: 18V-626
DATE: 10/30/18
https://www.nhtsa.gov/recalls?nhtsaId=10150926
https://static.nhtsa.gov/odi/tsbs/2018/MC-10150926-9999.pdf
Loading...
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- 8+ Popular Functions, Full System Diagnosis: TopScan Lite supports OBD2 full system diagnosis functions, including read/clear codes, ECU information,AUTO VIN, viewing real-time data, and active tests. It offers 8+ reset functions: Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, and Airbag Reset. By these functions, you can save on unnecessary repair costs and reduce repair times significantly.
- Bi-directional Control, Quickly Locate Problems: The bi-directional scan tool enables you to send commands from your smartphone directly to the vehicle's ECU for active testing. This feature helps to quickly narrow down problem areas, such as A/C clutch, windows, doors, sunroof, etc., reducing the mechanic's diagnostic time and can help DIY users locate faults more easily. Additionally, TopScan Lite provides fault analysis and repair guidance, helping you solve problems efficiently.
- Bluetooth Quick Pairing in Seconds: With the upgraded 5.0 Bluetooth system, TopScan Lite ensures a faster connection, eliminating the hassle of wires.The bluetooth pairing process needs to be completed in the application (IOS: TOPGURU&Android: TopScan). you can download our app from APP Store and Google play. TopScan Lite provides one software updates with no fee. (Tips: Cannot support 32-bit cell phones}
- Performance Testing: Always Know Your Vehicle's Condition, TopScan Lite supports speed performance testing, allowing you to analyze speed changes and calculate engine displacement efficiency,the higher the VE volumetric efficiency, the better the power output performance of the engine.
- 4- Repair Guides, Your Online Assistant: TopScan Lite has launched 4 functions that are most touching for all car owners, DIY enthusiasts, and mechanics: TSB factory technical bulletins, easier and more convenient search. The OBD common fault code repair guidance, leading you to solve problems quickly. DLC diagnostic seat location, quickly positioning. Fault code database, telling you the reasons and solutions for all fault lights, saying goodbye to complicated methods.
- Advanced online ECU coding►►Maximize the capabilities of your vehicles with the ArtiDiag Pro ECU Coding tool. This scan tool, seamlessly compatible with renowned models such as VW, AUDI, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of coding sessions on low battery levels.
- Efficient Diagnostics with Bidirectional Control►►Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
- 31+ Services Resolve 90% of Repair Challenges►►Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 31 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
- FCA Autoauth&Full Sets of Adapters►►This diagnostic tool supports Autoauth for FCA SGW, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. Equipped with the Chrysler 12+8 adapter, the BMW-20 Adapter and Benz BZ-38 Adapter, this scanner saves you the hassle of sourcing adapters separately.
- Professional Customer Support►►At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a fee of 249 Bucks will apply for software updates.
- 💪【2024 New Uugraded Version of X431 ELITE GM】2024 LAUNCH X431 Elite 2.0 PRO fit for GM is upgraded version with Enhanced Hardwares & Software, MUCH FASTER and SMARTER! 👍Dismountable USB Cable 👍Larger 2G+16GB Extended Memory 👍Android 8.1 OS 👍 3000mAh Battery with Power Button 👍Lifetime F~ree Update👍 Full Systems Diagnostic 👍All F~ree Service Function 👍Bi-Directional Control 👍AutoVIN 👍Full OBD2 Modes
- 💪【Powerful Bi-Directional Control/Active Test】LAUNCH X431 Elite 2.0 Pro fit for GM scanner code reader can send command directly from the automobile scanner to vehicle's ECU to perform vehicle-specific active tests on car's components and parts, confirm whether this part work normally and find out potential problems. Such as Doors, Windows, Mirrors, Locks, Lights, Headlamps, Wipers, Sunroofs, Air Pump Relay Test, Fuel Pump Relay Test, Spark Advance Test, Fan Speed Desired Test, Cooling Fan Test etc.
- 💪【All F~ree Maintenance Service Reset】As the popular diagnostic scanner in the market, LAUNCH X431 Elite 2.0 PRO diagnostic scan tool comes with comprehensive service options: Reset, Relearn, Relearn, Match, Adaption, Calibration, Initialization. Such as Oil light reset, EPB, SAS, Throttle Relearn, D.P.F Regen, ABS Bleeding, Injector Coding, CVT, Air Suspension, Crankshaft Relearn, Gear Learning, Battery Registration. The Functions depends on the conditions of the vehicle, please inform the VIN by QA or Email for check.
- 💪【OE-LEVEL Full Systems Diagnostic 】2024 new upgraded LAUNCH X431 Elite 2.0 PRO fit for GM diagnostic scan tool, provides you with All-Around & In-Depth diagnostic for all available modules such as ECM/BCM/SAS/ABS/TCM
/.... It supports to read/clear codes, live data stream, retrieves module info, turn off warning light, actuation test, freeze-frame and so on, which make you easily know the car situation and finger out problems soon. - 💪【AUTO VIN FOR GM & FULL OBD2 MODES FOR ALL BRANDS】AUTO-VIN can auto access to car information and scan vehicle systems by one touch for 2006+ GM cars like Buick/Chevy/Cadillac/GMC/Alpheon/Ravon/Pontiac/Saturn/Hummer/Oldsmobile/Holden/Daewoo/Workhorse, no longer needed to input manual. LAUNCH X431 Elite 2.0 Pro fit for GM has an extra function: It supports Full 10 OBD2 Test Modes for ALL brands vehicles after 1996, including I/M readiness, O2 Monitor Test, EVAP test(Mode 8), On-board Monitor test(Mode 6) and more.
/.... It supports to read/clear codes, live data stream, retrieves module info, turn off warning light, actuation test, freeze-frame and so on, which make you easily know the car situation and finger out problems soon.
- 【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as " Per-fect Overall Car Diagnostic Scanner " by famous editors, and also highly recom-mended by YouTube machinists.
- 【What Are the 2024 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
- 【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
- 【2024 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2024, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【Bi-Directional+Online Coding+Over 37 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ IMMO/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the"vehicle brand"-"menu"-"system" - "special functions".
- 👍【2024 LAUNCH NEW RELEASED FULL FUNCTIONAL SCANNER】 LAUNCH X431 PRO ELITE comes with✅Full Bi-directional Control✅ECU/Online Coding✅37+ Services✅All Systems Diagnostics✅F.C.A AutoAuth✅CANFD DOIP✅ V.A.G Guide✅ Refresh Hidden Functions✅Auto Vin✅Remote Control✅20,0000+ Vehicle Coverage✅ 25 languages✅8 Extension Modules Supported(TPMS,XPROG 3,Oscilloscope ...) 👉X431 PRO ELITE combine all the hot functions of comprehensive scanners according to the customer's favorite need.
- 👍【FULL BI-DIRECTIONAL CONTROL】X431 PRO ELITE Factory-Level scanner is capable of full bi-directional controls (active test) over various vehicle sub-systems and components like fuel pump test, radiator fan, cooling fan test, injector kill tests, relays,coils, solenoid valves, throttle, lights, abs motor pump, headlights, A/C clutch, windows/doors/roof/wipers etc. 🚩The bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.
- 👍【FULL ADVANCED FUNCTIONS: ECU CODING, V.A.G GUIDED...】LAUNCH X431 PRO ELITE diagnostic tablet can perform Online ECU coding for 95% cars, Component Matching, PMI, Adaptive Data Reset, V.A.G Guided,Power Balance,Online Calibration,Online Parameterization to diy vehicle settings and disable annoying features like seatbelt alarm, speed limiter,daytime lights and reveal hidden functions like rear-view mirror etc. 🚩The car scanner is better than other brands' scanners: More feature.
- 👍【HOT 37+ RESETS/CALIBRATION/INITIALIZATION/】LAUNCH X431 PRO ELITE compatible with 150+ car makes 1996-2024 and offers 37+ HOT services including Oil Reset, EPB, SAS Calibration,DPF, BMS, Throttle, TPMS Reset, Gearbox Match, Suspension, ABS Bleed, Injector Coding...You will get 300+ resets under "vehicle brand" >"system">"special functions".🚩This x431 diagnostic tool that is most worthwhile for DIYers, mechanics, and tire shops.
- 👍【8 EXPANSION MODULES SUPPORTED 】Support ADAS, VideoScope, Sensor Box, Endoscope,Oscilloscope,Battery tester,Wifi Printer,TS GUN, PROG 3 etc.➤ADAS Kit to assist ADAS calibration;VSP-600 VideoScope to check unseen parts of the engine, fuel tank etc.;S2-2 SensorBox to simulate vehicle sensor faults;O2-1 ScopeBox Oscilloscope to quickly acquire circuit signals;Battery Tester to do battery test;Printer to print out diagnostic reports; TS GUN: Activate all sensors,TPMS relearn,Program LAUNCH sensors;X-PROG 3🚩All are sold separately to meet your various needs.
- Auto Scanner Case Perfect Fit: This mini code readers & scan tools carrying case is perfect for BlueDriver Bluetooth Pro OBDII OBD2 LSB2 Scan Tool for iPhone & Android, Veepeak OBDCheck BLE OBD2 Bluetooth Scanner Auto OBD II Diagnostic Scan Tool, Dimension: 3.14 x 2.56 x 1.6 inches.
- Compact&Lightweight, Hard and Skid-Proof obdii scanner bluetooth Storage Bag: Made of hard EVA material with soft touch PU leather surface,It provides a full range of protection for your car code reader, it’s not only easy to store bluedriver LSB2 Diagnostic Scan Tool indoors prevent loss, but also can be fully prepared for outdoor activities in your car or truck, easy for you to read and clear your Check Engine Light and all other vehicle systems.
- 100% safe car scanner reader case holder: The Blue Driver OBDII scanner fits snugly in this case, without any looseness inside, keep your obd2 scanner safety all the time, this scanner tool case is sturdy, easy to open and close. You don't have to worry about damaging the OBD2 Diagnostic Scan Tool 'when' I accidentally drop the case or knock it to the ground.
- Portable Carrying Auto Mini Case: It is really compact and space saving, easy for you to carrying it anywhere, you can put it in your purse, pocket, backpack or just keep it in your car. You can always check up your vehicle with fixd car diagnostic tool, perfect as a gift for your friends, husband, father and someone who own a OBD2 Diagnostic Scan Tool.
- NOTE: For sale is only a case, not include the bluedriver obd2 scanner and other accessories, with any quality problem, please contact us directly, we will always on your service.
- 🔥🔥🔥【2024 NEW VERSION OF MX808S MK808, SAME AS MK808BT PRO】Big Surprise! Autel has upgraded the MK808 to the 2024 MK808S. With the same cost, you are experiencing 5X faster diagnostics and 150 wider car coverage from 1996-2023-2024. Function as MK808BT PRO MK808K-BT MK808Z-BT, the pro-level MK808S enjoys powerful CPU ROCKCHIP RK3566, improved Android 11, larger 4+64GB, 5G & 2.4 GHz Dual WiFi, newly added Wi-Fi Print, Bi-directional Control and FCA Autoauth for Chrysler Jeep Dodge Fiat etc.
- 【2024 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2024 upgraded version of MaxiChek MX808, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective Autel scanner (without breaking the bank, same as MP808BT and MS906BT). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, supports 150+ car brands worldwide & FCA AutoAuth, Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including Oil Reset, SAS Calibration, IMMO, ABS Bleeding, Injector Coding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2024.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, provides ECU info, displays Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUTO SCAN & AUTOVIN, 5X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECUs and detects any fault codes. Check AutoVIN compatibility, please contact us at 📞 MotorzoneUS @ outlook . com 📞
- [2023 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen for a tablet-like user experience. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide, provide an unparalleled diagnostic experience at an affordable price.
- [TOPDON's Newly Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [Newly Released DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast.
- [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- [ALL IN ONE FUNCTIONS IN YOUR HAND] Upgraded of LAUNCH X431 Elite, 2024 LAUNCH X431 Elite 2.0 PRO fit for BMW OBD2 Scanner equipped with advanced Android 8.1 OS & 4'' Touchscreen, which fast boot-up to make diagnostic smoother, offering an Easier & Faster operating experience for you. Also be feature-rich: In-depth Full System Diagnosis, Full Bi-directional Control, ECU Coding, All Services, 10 Full OBD2 Function, Auto VIN, Lifetime Update. A Must Have for BMW/MINI/Rolls Royce Owner.
- [ALL MAINTENANCE SERVICE] Fit for BMW/Mini/Rolls-Royces, LAUNCH X431 Elite 2.0 PRO diagnostic scaner offers ALL services, including Oil/EPB Reset, ABS Bleeding, Idle Speed, D.PF Regen, Ride Height Adjustment, Auto Start-Stop, Transmission Relearn, Delete Transport Mode, etc. *It is also a battery registration tool dedicated to BMW cars (also for different type&capacity). Get All services from "Diagnose>Automatically Search>Special Funciton". Check compatibility before purchase.
- [ADVANCED ECU CODING, CUSTOMIZE CAR EASILY] 2024 LAUNCH X431 Elite 2.0 PRO fit for BMW bidirectional scan tool has fully upgraded with advanced ECU coding. It supports Component Matching, Flash Hidden Functions, Customize OE-settings,etc. to optimize car performance. You can activate higher-level functions or disable annoying features, like Auto Rear Mirror Folding, Auto Door Lock/Unlock, Seat Belt Warning Off. NT710's coding ONLY for BMW's F & E chassis; our's can for F/E/G/I and etc. chassis.
- [POWERFUL BI-DIRECTIONAL CONTROL/ACTIVE TEST] LAUNCH X431 Elite 2.0 PRO fit for bmw obd2 scanner, inherits the powerful bi-directional control features of LAUNCH X431 series. It allows you to control the system or component for active test on BMW/Mini/Rolls-Royce cars, helping check if the car actuators are all in good condition, such as windows, rear mirrors, wipers, horn test. You can also use it to recalibrate, readapt or reconfigure for some components after making repairs or replacement.
- [OE-LEVEL ALL SYSTEMS DIAGNOSTIC FOR YOUR BIMMER] As the Top-Dog in the market, LAUNCH is famous for its powerful diagnostic functions. 2024 newly upgraded LAUNCH X431 Elite 2.0 PRO fit for BMW/Mini/Rolls-Royce full diagnostic tool, provides you with All-Around & In-Depth diagnostic for all available modules. It supports to read/clear codes, view data stream, retrieves freeze-frame, read ECU information, and etc., which make you easily know the car situation and finger out problems soon.
Last update on 2024-03-30 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.