| “This site contains affiliate links for which OEMDTC may be compensated” |
February 28, 2019 NHTSA CAMPAIGN NUMBER: 19V149000
Brake Lights May Not Illuminate
Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of crash.
NHTSA Campaign Number: 19V149
Manufacturer Subaru of America, Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1,303,530
Summary
Subaru of America, Inc. (Subaru) is recalling certain 2014-2016 Forester, 2008-2016 Impreza sedans, 2012-2016 Impreza station wagons, 2008-2014 WRX sedans (including STI), and 2013-2017 Crosstrek vehicles. Exposure to certain contaminants may cause the brake light switch to malfunction, preventing the brake lights from illuminating and also preventing keyless ignition vehicles from starting and CVT/automatic transmissions from being able to be shifted out of Park.
Remedy
Subaru will notify owners, and dealers will replace the brake light switch, free of charge. The recall began April 15, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru’s number for this recall is WUE-90.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Subaru has a Recall
INTRODUCTION:
Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
AFFECTED VEHICLES:
| Model Years | Carline | Production Date Range | Vehicle count |
| 2013-2017 | Crosstrek | May 17, 2012 – June 13, 2017 | 363,566 |
| 2014-2016 | Forester | December 18, 2012 – April 28, 2016 | 526,941 |
| 2008-2016 | Impreza 4-door | April 26, 2007 – October 28, 2016 | 162,744 |
| 2012-2016 | Impreza 5-door | April 28, 2011 – October 3, 2016 | 210,553 |
| 2008-2014 | WRX 4-door | April 26, 2007 – January 15, 2014 | 39,726 |
Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com. Please be advised that the status of this recall will display as “Open – Remedy Not Yet Available” until the parts and special tools to perform this repair are available. On April 16, 2019, the status of this recall will be updated from “Open- Remedy Not yet Available” to “Open” for all affected vehicles.
DESCRIPTION OF THE DEFECT AND SAFETY RISK:
Silicone gas, potentially introduced to the vehicle through various consumer goods, may seep into the brake lamp switch housing on the affected vehicles. If silicone gas is present in the switch housing during contact closure, silicon dioxide may form a deposit layer on the switch contact terminal. If this layer accumulates, the switch contact may lose conductivity, which may result in a loss of function.
If the brake lamps do not illuminate properly, a trailing vehicle may be unable to recognize the braking operation, which may increase the risk of a rear-end collision.
DESCRIPTION OF THE REMEDY:
Subaru retailers will replace the brake lamp switch on all affected vehicles, with a remedied one.
RETAILER RESPONSIBILITY:
Once the parts and special tools are available to perform this repair, retailers are to promptly perform the applicable service procedures to correct all affected vehicles in their inventory.
Any vehicles (new, used, demo, SSLP, etc.) listed in a recall/campaign that are in the retailer’s stock must be:
- Immediately identified.
- Tagged or otherwise marked to prevent their delivery or use prior to repair.
- Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin, once the parts and tools are available.
Until the parts and special tools are available, this recall cannot be performed. If an affected vehicle is in for service, please inform the owner that their vehicle is affected by this recall and that remedy parts are not yet available, and that all affected owners will be notified by mail once the repair can be performed.
Depending on the model, the brake lamp switch functions may include: brake lamp illumination, transmission interlock (shifting from park), ignition interlock (push-button ignition start), anti-lock brake system (ABS) functionality, vehicle dynamics control (VDC) functionality, and/or EyeSight operation. If the vehicle experiences a loss in function, as described, any of the associated warning light(s) will illuminate. In the event of a brake lamp switch failure, the brake system’s ability to stop the vehicle is unaffected.
If it is confirmed that the brake lamp switch is malfunctioning on an affected vehicle prior to remedy parts being available, please order and install the current replacement part applicable to the vehicle, at no charge to the customer. Please ensure that the customer understands that such a replacement would be an interim repair until the modified remedy parts become available.
OWNER NOTIFICATION:
Owner notification by first class mail will occur from April 15 through April 29, 2019. Owners with a valid email address on file with MySubaru.com will also be notified by email once all the postal mailings have been completed. After April 29, Care Connect will have this recall and will include it in Scheduled Maintenance Triggers and Recall Market Drivers.
RETAILER AFFECTED VIN LISTS:
Each Subaru retailer will receive an affected VIN list from their Zone Office. Vehicles will be assigned to retailers as follows:
- Original vehicle owners are assigned to the original selling retailer when their current address is within a 100-mile radius of that retailer.
- If the original selling retailer is inactive, the VIN has been assigned to the nearest active retailer.
- For any new owners or when original owners live more than 100 miles from the original selling retailer, the VIN has been assigned to the nearest active retailer.
Important: Retailer affected VIN lists include information for vehicles affected by this recall. This information will enable retailers to follow up with owners of affected vehicles. The lists contain owners’ names and phone numbers obtained from State Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is unlawful. Accordingly, retailers are required to limit the use of these lists for the sole purpose of completing this recall
PARTS INFORMATION:
A Brake Lamp Switch Repair Kit has been established. The part number is 83319FJ000. The kit includes:
- Brake Lamp Switch
- Adapter Harness
- Clevis Pin
VERY IMPORTANT: A special SILICONE-FREE grease is required to be used for lubricating the clevis pin connecting the master cylinder operating rod to the brake pedal. The (ordering) part number is SOA868V9700. A quantity of one consists of a box containing four 2-ounce tubes of this special grease. This grease is NOT included in the Brake Lamp Switch Repair Kit listed above. DO NOT SUBSTITUTE any other readily-accessible grease for this repair as the internal components of the brake lamp switch will likely be damaged.
NOTE: The grease part number required for claim submission purposes is SOA635155.
On April 10, 2019, SOA Parts will enter orders into the system to automatically ship an initial supply of the brake lamp switches, special grease, and special tools needed for this repair. Each retailer will receive an initial supply of the following:
- 40 brake lamp switch kits
- 4 – 2 oz. tubes of special grease
- 3 special tools
Additional brake lamp switch kits must be ordered through PRIME. Please refer to ‘Recalls & Campaigns/PRIME Max Quantities’ on Subarunet for the orderable quantities.
SPECIAL TOOL INFORMATION:
A special magnetic tool (p.n. 83399FJ000RT) has been developed to secure the Adjusting nut of the new brake lamp switch. Each retailer will be supplied with THREE of these tools free of charge. A metric tape measure is highly recommended for the adjustment measurement procedure.
SPECIAL TOOL CAUTIONS:
This Special Tool is equipped with a series of high-powered magnets. Follow the instructions below for your safety.
- A person wearing electronic medical device such as a pacemaker is prohibited to use or be near this tool. The magnetic force generated by this tool may interfere with operation of medical devices and pose a possible serious risk.
- This tool may affect operation of other electronic devices or magnetic recording mediums. Never leave the tool in a car when not being used.
- When using this tool, disconnect the negative terminal from the battery to prevent damaging other electronic device(s) which may be close by.
- Since this tool generates a strong magnetic force, it may attract metal powder, metal debris, small parts etc. Always keep the tool clean and away from metal contaminants.
TIP: To prevent leaving the tool behind after completing the repair, CAREFULLY drill a small hole in the handle end of the tool and install an unused lanyard as shown.
SERVICE PROCEDURE:
Before beginning this procedure:
- Record the customer’s radio station presets and Navigation favorites (where applicable).
- Disconnect the ground cable from battery and wait for at least 60 seconds before proceeding.
1) Remove the lower dash trim panels and related components as necessary for access to the brake lamp switch following the procedures in the applicable Service Manual. On models where the OBD connector bracket is installed onto the steering column, remove the bracket.
2) Disconnect then remove the original brake lamp switch from the pedal bracket and discard. Tagging and retention for warranty are not required for this repair.
3) Wearing appropriate eye protection and using a small flat-blade screw driver, pry and break one of the 2 retaining tabs securing the plastic clip to the pedal bracket. Use a larger flat-blade screw driver to pry the remainder of the clip loose. Make sure any remaining broken pieces are removed from the vehicle.
4) Remove the snap pin (a) and clevis pin (b), then separate the brake pedal from the operating rod.
CAUTION:
- When handling the operating rod, pay attention not to apply excessive force to it.
- Do not tilt the operating rod over 3°(degrees) as brake booster internals may be damaged.
5) Prepare the brake lamp switch by disconnecting the conversion harness, removing the Adjusting nut and threading the Lock nut all the way up toward the switch body.
6) Apply the Adjusting nut onto the special tool as shown. The tool’s magnets will hold it in place.
7) Insert the special tool and apply the Adjusting nut to the front (engine side) of the brake pedal bracket. Make sure the tabs on the Adjusting nut and notches in the brake-pedal bracket are aligned. When the Adjusting nut is properly positioned, it will be flat against the front side of the bracket as shown.
8) Thread the brake lamp switch into the adjusting nut clockwise until it stops. Do not over-tighten the switch. Remove the special tool.
IMPORTANT NOTES:
- Apply a small amount of the special grease on both the snap pin and NEW clevis pin to prevent wear.
- Make sure the NEW clevis pin is inserted in the proper direction (toward the column) as shown in the illustration.
- If the holes of the brake pedal and operating rod clevis do not align, turn the brake lamp switch counterclockwise while pulling up the brake pedal to keep the adjusting nut “locked” in position. Reposition the brake pedal as necessary until the holes align. Once aligned, tighten the Lock nut with your fingers to keep the switch in position.
9) Using the NEW clevis pin from the kit, re-connect the brake pedal to the operating rod and install the snap pin.
10) Adjust the brake lamp switch following the procedure below:
- Turn the brake lamp switch clockwise while pulling up the brake pedal until the tip of the switch contacts to the brake pedal stopper.
- Determine the exact position where the brake lamp switch contacts the stopper by watching the brake pedal begin to move. Call this the “Zero Point”. A “feel” will develop over time for determining this switch position.
- With the switch at the Zero Point, turn it 1.5 turns COUNTERCLOCKWISE then “snug” the Lock nut to hold this initial adjustment.
- Re-connect the conversion harness to the switch and vehicle harness.
- Re-connect the negative battery terminal but DO NOT turn on the ignition.
- Adjust the steering wheel position.
- Tilt position: All the way DOWN.
- Telescopic position: All the way IN.
- Apply a small piece of tape to the steering wheel at the 6:00 position ( 1). Use a fine-point pen or sharp pencil to make a thin line (Fig. 3) below. IMPORTANT: To avoid possible damage to the steering wheel cover, use a tape with enough adhesive strength to keep it attached while measuring and remove it as soon as possible. Blue painter’s tape or other low adhesive, residue-free tape is recommended.
- “Hook” the end of a tape measure to the end of the brake pedal as shown below. NOTE: The up-down position ( 2, blue line) of the tape measure on the brake pedal is critical for making consistent measurements.
- SLOWLY depress the brake pedal until the brake lights illuminate. Measure the brake pedal stroke (distance from “free” position to stop light ON position) following the reference pictures below.
The pedal stroke specification for these models is 4mm to 6mm.
- If the measurement is within the standard value (4 mm – 6 mm), proceed to 11) below and secure the conversion harness as described in 12) below.
- If the measurement is out of standard value (less than 4 mm or more than 6 mm), repeat this step and CAREFULLY re-adjust the brake lamp switch position as necessary to achieve the standard value.
11) Tighten the Lock nut to 8.0 Nm (5.9 ft. lbs.) and re-check the measurement to confirm it is still within specification. Repeat 10) above if needed.
12) Once final confirmation of the adjustment is complete, secure the conversion harness to the vehicle harness with electrical tape.
13) If equipped, disconnect the negative battery cable again before re-installing the knee airbag module. Otherwise, reassemble the interior trim components in reverse order of removal.
14) Reconnect the negative battery cable and tighten to 6Nm (4.4 ft. lbs.).
NOTE: If (where applicable) the Airbag light comes on and a DTC for the driver’s knee airbag module is stored, always confirm the module has been fully reconnected and clear the memory before releasing the vehicle.
15) Reset the customer’s radio station presets and Navigation favorites (where applicable).
SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identification Label. The completed label should be attached to the vehicle’s upper radiator support.
Additional labels are available through normal parts ordering channels. The part number is MSA6P1302, which comes as one sheet of 20 labels.
SEOCONTENT-START
CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers may submit claims through Subarunet.com.
| Labor Description | Labor Operation # | Labor Time | Fail Code | Claim Type |
| WUE-90 BRAKE LAMP SWITCH REPLACEMENT | 183-821 | 0.5 | WUE-90 | RC |
REMINDER: The grease part number required for claim submission purposes is SOA635155.
This recall repair may be eligible to be performed at an alternate repair site—for example, a customer’s home or place of business, or at an auction—and not at the retailer’s main service facility. Repairs performed at an alternate repair site are subject to the requirements of Section 13.10 of the Claims Policies and Procedures Manual. These requirements will be strictly enforced. Please contact the SOA Claims Helpline if you have questions about the policy.
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
NUMBER: WUE-90R
NHTSA ID: 19V-149
DATE: 04/09/19
REVISED: 11/04/19
APPLICABILITY: 2013-2017 Crosstrek
2014-2016 Forester
2008-2016 Impreza 4-door
2012-2016 Impreza 5-door
2008-2014 WRX 4-door
SUBJECT: Brake Lamp Switch Replacement
SEOCONTENT-END
OWNER NOTIFICATION LETTER
URGENT
IMPORTANT SAFETY RECALL
This notice applies to the VIN below
Subaru Safety Recall WUE-90
NHTSA Recall ID 19V-149
April 2019
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists in certain 2013-2017 model year Crosstrek vehicles, 2014-2016 model year Forester vehicles, 2008-2016 model year Impreza (4-door) vehicles, 2012-2016 model year Impreza (5-door) vehicles, and 2008-2014 model year WRX (4door) vehicles.
You received this notice because our records indicate that you currently own one of these vehicles.
DESCRIPTION OF THE SAFETY DEFECT AND SAFETY HAZARD
Due to a potential defect in the brake lamp switch in your vehicle, the rear brake lamps may not illuminate as intended while braking. Brake lights that do not illuminate properly will not alert other drivers that the vehicle is slowing or stopping, increasing the risk of a crash.
In the event of a brake lamp switch failure, the brakes on your vehicle would not be affected. Secondary braking functions, however, such as ABS, VDC, and EyeSight® (if equipped), could be affected. In the event of a failure, the warning light(s) associated with these secondary braking functions will illuminate.
Depending on the vehicle model, the brake lamp switch functions affected by this condition may include the following:
- Rear brake lamp illumination
- Shifting a vehicle equipped with an automatic transmission out of ‘Park’
- Starting a vehicle equipped with push-button ignition
- Anti-lock Brake System (ABS) functionality
- Vehicle Dynamics Control (VDC) functionality
- EyeSight® Driver Assist operation
WHAT YOU SHOULD DO
You should immediately contact any authorized Subaru retailer (dealer) for an appointment to have the brake lamp switch replaced in your vehicle for free.
If your vehicle exhibits a problem related to any of the brake lamp switch functions listed above, please contact your Subaru retailer immediately for assistance.
To minimize your inconvenience while the repair is being performed, please ask your retailer for alternative transportation options.
WHAT SUBARU WILL DO
Subaru will replace the brake lamp switch in your vehicle with a remedied one, at no cost to you.
HOW LONG WILL THE REPAIR TAKE?
The time to replace the brake lamp switch is approximately 30 minutes. However, your retailer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time.
OWNER INFORMATION
Government regulations require that recall notifications be sent to the last known owner of record. That information is based primarily on state registration and title data. If you are a lessor of this vehicle, federal regulations require you to forward this notice to your lessee within ten days.
If you have moved or sold your vehicle, please update this information online at www.subaru.com, select ‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the drop-down menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement. Reimbursement consideration will be based on the amount an authorized Subaru retailer in your area would charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage at the time of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing address and telephone number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WUE-90 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt to process your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be completed.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’
For additional information, please go to: https://www.wue90.service-campaign.com. If you need additional assistance, please contact us directly:
- By e-mail: Go to www.subaru.com and select “Contact Us”
- By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
- By U.S. Postal mail: Write us at Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification email System, please go to: https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration (NHTSA), 1200 New Jersey Ave., SE, Washington, DC 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800424-9153) or go to https://www.safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
24 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| SUBARU | CROSSTREK | 2013-2017 |
| SUBARU | FORESTER | 2014-2016 |
| SUBARU | IMPREZA | 2008-2016 |
| SUBARU | WRX | 2008-2014 |
23 Associated Documents
Manufacturer Notices(to Dealers,etc)- UPDATE – Subaru Safety Recall: WUE-90 Brake Lamp Switch Replacement
RCMN-19V149-1546.pdf 272.332KB
Loading...
Reload document 
Open in new tab
ISSUED Owner Notification Letter(Part 577)
RCONL-19V149-0837.pdf 228.31KB
Loading...
Manufacturer Notices(to Dealers,etc)- UPDATE – Subaru Safety Recall: WUE-90 Brake Lamp Switch Replacement
RCMN-19V149-9108.pdf 247.682KB
Loading...
Remedy Instructions and TSB
RCRIT-19V149-9018.pdf 1066.516KB
Loading...
Manufacturer Notices(to Dealers,etc) – Retailer Pre-owned Assistance Program Brake Lamp Switch (WUE-90)
RCMN-19V149-6722.pdf 248.702KB
Loading...
Manufacturer Notices(to Dealers,etc) – March 1, 2019 – New Subaru Safety Recall: WUE-90 Brake Lamp Switch Replacement
RCMN-19V149-0857.pdf 177.971KB
Loading...
Manufacturer Notices(to Dealers,etc)- Date: April 15, 2019 REMINDER – Owner Notification: Subaru Safety Recall WUE-90 Brake Lamp Switch Replacement
RCMN-19V149-6809.pdf 264.233KB
Loading...
Chronology
RMISC-19V149-7975.pdf 101.775KB
Loading...
Defect Notice 573 Report
RCLRPT-19V149-4588.PDF 218.992KB
Loading...
Recall Acknowledgement
RCAK-19V149-6451.pdf 306.463KB
Loading...
Manufacturer Notices(to Dealers,etc)- WUE-90 Grease – Part Number SOA868V9700 – DEPARTMENT: Parts Supply Chain – DATE: 04/10/19
Loading...
Manufacturer Notices(to Dealers,etc)- Dealer announcement – WUE90 grease ordering procedure change
RCMN-19V149-6468.pdf 275.733KB
Loading...
Miscellaneous Document – email notification – Subaru Safety Recall WUE-90 Brake Lamp Switch Recall NHTSA Recall ID 19V-149
RMISC-19V149-8914.pdf 159.867KB
Loading...
Manufacturer Notices(to Dealers,etc)- April 18th, 2019 Re: WUE-90 Brake Light Switch – Required Process Changes
RCMN-19V149-8629.pdf 278.288KB
Loading...
Remedy Instructions and TSB
RCRIT-19V149-5150.pdf 1040.222KB
Loading...
Manufacturer Notices(to Dealers,etc)- April 30, 2019 Re: WUE-90 Brake Light Switch tool – additional distribution
Loading...
Manufacturer Notices(to Dealers,etc)- April 22, 2019 REMINDER – Owner Notification: Subaru Safety Recall WUE-90 Brake Lamp Switch Replacement-Updated
RCMN-19V149-5195.pdf 229.845KB
Loading...
Remedy Instructions and TSB
RCRIT-19V149-4360.pdf 1040.041KB
Loading...
Recall Quarterly Report #1, 2019-2
RCLQRT-19V149-2670.PDF 211.158KB
Loading...
Manufacturer Notices(to Dealers, etc.) – WUE-90 Brake Light Switch tool – additional stock.
RCMN-19V149-3697.pdf 257.499KB
Loading...
Recall Quarterly Report #2, 2019-3
RCLQRT-19V149-9949.PDF 211.256KB
Loading...
Remedy Instructions and TSB
RCRIT-19V149-8686.pdf 1055.028KB
Loading...
Recall Quarterly Report #3, 2019-4
RCLQRT-19V149-1851.PDF 211.354KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V149&docType=RCL
NUMBER: WUE-90R
NHTSA ID: 19V-149
DATE: 04/09/19
REVISED: 11/08/19
https://www.nhtsa.gov/recalls?nhtsaId=10168589
https://static.nhtsa.gov/odi/tsbs/2019/MC-10168589-0001.pdf
Loading...
NHTSA ID Number: 10163520
Manufacturer Communication Number: WUE-90 tool
Summary
SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
https://static.nhtsa.gov/odi/tsbs/2019/MC-10163520-0001.pdf
Loading...
NHTSA ID Number: 10161815
Manufacturer Communication Number: WUE-90R
Summary
Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
NUMBER: WUE-90R
NHTSA ID: 19V-149
DATE: 04/09/19
REVISED: 05/08/19
https://www.nhtsa.gov/recalls?nhtsaId=10161815
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161815-9999.pdf
Loading...
NUMBER: WUE-90R
NHTSA ID: 19V-149
DATE: 04/09/19
REVISED: 04/24/19
https://www.nhtsa.gov/recalls?nhtsaId=10160204
https://static.nhtsa.gov/odi/tsbs/2019/MC-10160204-9999.pdf
Loading...
New Subaru Safety Recall: WUE-90 Brake Lamp Switch Replacement
Date: March 1, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10160512
https://static.nhtsa.gov/odi/tsbs/2019/MC-10160512-9999.pdf
Loading...
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- 8+ Popular Functions, Full System Diagnosis: TopScan Lite supports OBD2 full system diagnosis functions, including read/clear codes, ECU information,AUTO VIN, viewing real-time data, and active tests. It offers 8+ reset functions: Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, and Airbag Reset. By these functions, you can save on unnecessary repair costs and reduce repair times significantly.
- Bi-directional Control, Quickly Locate Problems: The bi-directional scan tool enables you to send commands from your smartphone directly to the vehicle's ECU for active testing. This feature helps to quickly narrow down problem areas, such as A/C clutch, windows, doors, sunroof, etc., reducing the mechanic's diagnostic time and can help DIY users locate faults more easily. Additionally, TopScan Lite provides fault analysis and repair guidance, helping you solve problems efficiently.
- Bluetooth Quick Pairing in Seconds: With the upgraded 5.0 Bluetooth system, TopScan Lite ensures a faster connection, eliminating the hassle of wires.The bluetooth pairing process needs to be completed in the application (IOS: TOPGURU&Android: TopScan). you can download our app from APP Store and Google play. TopScan Lite provides one software updates with no fee. (Tips: Cannot support 32-bit cell phones}
- Performance Testing: Always Know Your Vehicle's Condition, TopScan Lite supports speed performance testing, allowing you to analyze speed changes and calculate engine displacement efficiency,the higher the VE volumetric efficiency, the better the power output performance of the engine.
- 4- Repair Guides, Your Online Assistant: TopScan Lite has launched 4 functions that are most touching for all car owners, DIY enthusiasts, and mechanics: TSB factory technical bulletins, easier and more convenient search. The OBD common fault code repair guidance, leading you to solve problems quickly. DLC diagnostic seat location, quickly positioning. Fault code database, telling you the reasons and solutions for all fault lights, saying goodbye to complicated methods.
- Advanced online ECU coding►►Maximize the capabilities of your vehicles with the ArtiDiag Pro ECU Coding tool. This scan tool, seamlessly compatible with renowned models such as VW, AUDI, SKODA, SEAT, BENZ, and more, empowers you to uncover hidden features, deactivate annoying functions, and code retrofitted components for peak performance. Ensure a backup before coding and steer clear of coding sessions on low battery levels.
- Efficient Diagnostics with Bidirectional Control►►Say goodbye to uncertainty, streamline diagnostics, and reclaim valuable time with ArtiDiag Pro scan tool. This bidirectional scan tool exceeds expectations, enabling targeted tests on individual actuators to swiftly identify and resolve issues. Covering lights, door locks, fuel and coolant systems, windows, wipers, EVAP, and more in vehicle components.
- 31+ Services Resolve 90% of Repair Challenges►►Unleash maximum productivity with the ArtiDiag Pro, a scan tool that tackles 90% of maintenance issues through its 31 special functions. Effortlessly clear oil maintenance indicators with oil reset. Engage the EPB Reset for brake system management and establish precise alignment with the Steering Angle Reset to define the straight-line reference position for your vehicle.
- FCA Autoauth&Full Sets of Adapters►►This diagnostic tool supports Autoauth for FCA SGW, Chrysler, Jeep, Dodge, Fiat etc. 2017 and later. Equipped with the Chrysler 12+8 adapter, the BMW-20 Adapter and Benz BZ-38 Adapter, this scanner saves you the hassle of sourcing adapters separately.
- Professional Customer Support►►At TOPDON, your satisfaction is our unwavering commitment. Experience hassle-free support and a lifetime of expert assistance. Should you encounter any challenges, reach out to us at 833-629-4832. For returns, please damage the packaging to prevent Amazon from reselling it. Please be advised that after two years, a fee of 249 Bucks will apply for software updates.
- 💪【2024 New Uugraded Version of X431 ELITE GM】2024 LAUNCH X431 Elite 2.0 PRO fit for GM is upgraded version with Enhanced Hardwares & Software, MUCH FASTER and SMARTER! 👍Dismountable USB Cable 👍Larger 2G+16GB Extended Memory 👍Android 8.1 OS 👍 3000mAh Battery with Power Button 👍Lifetime F~ree Update👍 Full Systems Diagnostic 👍All F~ree Service Function 👍Bi-Directional Control 👍AutoVIN 👍Full OBD2 Modes
- 💪【Powerful Bi-Directional Control/Active Test】LAUNCH X431 Elite 2.0 Pro fit for GM scanner code reader can send command directly from the automobile scanner to vehicle's ECU to perform vehicle-specific active tests on car's components and parts, confirm whether this part work normally and find out potential problems. Such as Doors, Windows, Mirrors, Locks, Lights, Headlamps, Wipers, Sunroofs, Air Pump Relay Test, Fuel Pump Relay Test, Spark Advance Test, Fan Speed Desired Test, Cooling Fan Test etc.
- 💪【All F~ree Maintenance Service Reset】As the popular diagnostic scanner in the market, LAUNCH X431 Elite 2.0 PRO diagnostic scan tool comes with comprehensive service options: Reset, Relearn, Relearn, Match, Adaption, Calibration, Initialization. Such as Oil light reset, EPB, SAS, Throttle Relearn, D.P.F Regen, ABS Bleeding, Injector Coding, CVT, Air Suspension, Crankshaft Relearn, Gear Learning, Battery Registration. The Functions depends on the conditions of the vehicle, please inform the VIN by QA or Email for check.
- 💪【OE-LEVEL Full Systems Diagnostic 】2024 new upgraded LAUNCH X431 Elite 2.0 PRO fit for GM diagnostic scan tool, provides you with All-Around & In-Depth diagnostic for all available modules such as ECM/BCM/SAS/ABS/TCM
/.... It supports to read/clear codes, live data stream, retrieves module info, turn off warning light, actuation test, freeze-frame and so on, which make you easily know the car situation and finger out problems soon. - 💪【AUTO VIN FOR GM & FULL OBD2 MODES FOR ALL BRANDS】AUTO-VIN can auto access to car information and scan vehicle systems by one touch for 2006+ GM cars like Buick/Chevy/Cadillac/GMC/Alpheon/Ravon/Pontiac/Saturn/Hummer/Oldsmobile/Holden/Daewoo/Workhorse, no longer needed to input manual. LAUNCH X431 Elite 2.0 Pro fit for GM has an extra function: It supports Full 10 OBD2 Test Modes for ALL brands vehicles after 1996, including I/M readiness, O2 Monitor Test, EVAP test(Mode 8), On-board Monitor test(Mode 6) and more.
/.... It supports to read/clear codes, live data stream, retrieves module info, turn off warning light, actuation test, freeze-frame and so on, which make you easily know the car situation and finger out problems soon.
- 【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as " Per-fect Overall Car Diagnostic Scanner " by famous editors, and also highly recom-mended by YouTube machinists.
- 【What Are the 2024 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
- 【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
- 【2024 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2024, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【Bi-Directional+Online Coding+Over 37 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ IMMO/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the"vehicle brand"-"menu"-"system" - "special functions".
- 👍【2024 LAUNCH NEW RELEASED FULL FUNCTIONAL SCANNER】 LAUNCH X431 PRO ELITE comes with✅Full Bi-directional Control✅ECU/Online Coding✅37+ Services✅All Systems Diagnostics✅F.C.A AutoAuth✅CANFD DOIP✅ V.A.G Guide✅ Refresh Hidden Functions✅Auto Vin✅Remote Control✅20,0000+ Vehicle Coverage✅ 25 languages✅8 Extension Modules Supported(TPMS,XPROG 3,Oscilloscope ...) 👉X431 PRO ELITE combine all the hot functions of comprehensive scanners according to the customer's favorite need.
- 👍【FULL BI-DIRECTIONAL CONTROL】X431 PRO ELITE Factory-Level scanner is capable of full bi-directional controls (active test) over various vehicle sub-systems and components like fuel pump test, radiator fan, cooling fan test, injector kill tests, relays,coils, solenoid valves, throttle, lights, abs motor pump, headlights, A/C clutch, windows/doors/roof/wipers etc. 🚩The bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.
- 👍【FULL ADVANCED FUNCTIONS: ECU CODING, V.A.G GUIDED...】LAUNCH X431 PRO ELITE diagnostic tablet can perform Online ECU coding for 95% cars, Component Matching, PMI, Adaptive Data Reset, V.A.G Guided,Power Balance,Online Calibration,Online Parameterization to diy vehicle settings and disable annoying features like seatbelt alarm, speed limiter,daytime lights and reveal hidden functions like rear-view mirror etc. 🚩The car scanner is better than other brands' scanners: More feature.
- 👍【HOT 37+ RESETS/CALIBRATION/INITIALIZATION/】LAUNCH X431 PRO ELITE compatible with 150+ car makes 1996-2024 and offers 37+ HOT services including Oil Reset, EPB, SAS Calibration,DPF, BMS, Throttle, TPMS Reset, Gearbox Match, Suspension, ABS Bleed, Injector Coding...You will get 300+ resets under "vehicle brand" >"system">"special functions".🚩This x431 diagnostic tool that is most worthwhile for DIYers, mechanics, and tire shops.
- 👍【8 EXPANSION MODULES SUPPORTED 】Support ADAS, VideoScope, Sensor Box, Endoscope,Oscilloscope,Battery tester,Wifi Printer,TS GUN, PROG 3 etc.➤ADAS Kit to assist ADAS calibration;VSP-600 VideoScope to check unseen parts of the engine, fuel tank etc.;S2-2 SensorBox to simulate vehicle sensor faults;O2-1 ScopeBox Oscilloscope to quickly acquire circuit signals;Battery Tester to do battery test;Printer to print out diagnostic reports; TS GUN: Activate all sensors,TPMS relearn,Program LAUNCH sensors;X-PROG 3🚩All are sold separately to meet your various needs.
- Auto Scanner Case Perfect Fit: This mini code readers & scan tools carrying case is perfect for BlueDriver Bluetooth Pro OBDII OBD2 LSB2 Scan Tool for iPhone & Android, Veepeak OBDCheck BLE OBD2 Bluetooth Scanner Auto OBD II Diagnostic Scan Tool, Dimension: 3.14 x 2.56 x 1.6 inches.
- Compact&Lightweight, Hard and Skid-Proof obdii scanner bluetooth Storage Bag: Made of hard EVA material with soft touch PU leather surface,It provides a full range of protection for your car code reader, it’s not only easy to store bluedriver LSB2 Diagnostic Scan Tool indoors prevent loss, but also can be fully prepared for outdoor activities in your car or truck, easy for you to read and clear your Check Engine Light and all other vehicle systems.
- 100% safe car scanner reader case holder: The Blue Driver OBDII scanner fits snugly in this case, without any looseness inside, keep your obd2 scanner safety all the time, this scanner tool case is sturdy, easy to open and close. You don't have to worry about damaging the OBD2 Diagnostic Scan Tool 'when' I accidentally drop the case or knock it to the ground.
- Portable Carrying Auto Mini Case: It is really compact and space saving, easy for you to carrying it anywhere, you can put it in your purse, pocket, backpack or just keep it in your car. You can always check up your vehicle with fixd car diagnostic tool, perfect as a gift for your friends, husband, father and someone who own a OBD2 Diagnostic Scan Tool.
- NOTE: For sale is only a case, not include the bluedriver obd2 scanner and other accessories, with any quality problem, please contact us directly, we will always on your service.
- 🔥🔥🔥【2024 NEW VERSION OF MX808S MK808, SAME AS MK808BT PRO】Big Surprise! Autel has upgraded the MK808 to the 2024 MK808S. With the same cost, you are experiencing 5X faster diagnostics and 150 wider car coverage from 1996-2023-2024. Function as MK808BT PRO MK808K-BT MK808Z-BT, the pro-level MK808S enjoys powerful CPU ROCKCHIP RK3566, improved Android 11, larger 4+64GB, 5G & 2.4 GHz Dual WiFi, newly added Wi-Fi Print, Bi-directional Control and FCA Autoauth for Chrysler Jeep Dodge Fiat etc.
- 【2024 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2024 upgraded version of MaxiChek MX808, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective Autel scanner (without breaking the bank, same as MP808BT and MS906BT). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, supports 150+ car brands worldwide & FCA AutoAuth, Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including Oil Reset, SAS Calibration, IMMO, ABS Bleeding, Injector Coding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2024.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, provides ECU info, displays Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUTO SCAN & AUTOVIN, 5X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECUs and detects any fault codes. Check AutoVIN compatibility, please contact us at 📞 MotorzoneUS @ outlook . com 📞
- [2023 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen for a tablet-like user experience. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide, provide an unparalleled diagnostic experience at an affordable price.
- [TOPDON's Newly Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [Newly Released DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast.
- [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- [ALL IN ONE FUNCTIONS IN YOUR HAND] Upgraded of LAUNCH X431 Elite, 2024 LAUNCH X431 Elite 2.0 PRO fit for BMW OBD2 Scanner equipped with advanced Android 8.1 OS & 4'' Touchscreen, which fast boot-up to make diagnostic smoother, offering an Easier & Faster operating experience for you. Also be feature-rich: In-depth Full System Diagnosis, Full Bi-directional Control, ECU Coding, All Services, 10 Full OBD2 Function, Auto VIN, Lifetime Update. A Must Have for BMW/MINI/Rolls Royce Owner.
- [ALL MAINTENANCE SERVICE] Fit for BMW/Mini/Rolls-Royces, LAUNCH X431 Elite 2.0 PRO diagnostic scaner offers ALL services, including Oil/EPB Reset, ABS Bleeding, Idle Speed, D.PF Regen, Ride Height Adjustment, Auto Start-Stop, Transmission Relearn, Delete Transport Mode, etc. *It is also a battery registration tool dedicated to BMW cars (also for different type&capacity). Get All services from "Diagnose>Automatically Search>Special Funciton". Check compatibility before purchase.
- [ADVANCED ECU CODING, CUSTOMIZE CAR EASILY] 2024 LAUNCH X431 Elite 2.0 PRO fit for BMW bidirectional scan tool has fully upgraded with advanced ECU coding. It supports Component Matching, Flash Hidden Functions, Customize OE-settings,etc. to optimize car performance. You can activate higher-level functions or disable annoying features, like Auto Rear Mirror Folding, Auto Door Lock/Unlock, Seat Belt Warning Off. NT710's coding ONLY for BMW's F & E chassis; our's can for F/E/G/I and etc. chassis.
- [POWERFUL BI-DIRECTIONAL CONTROL/ACTIVE TEST] LAUNCH X431 Elite 2.0 PRO fit for bmw obd2 scanner, inherits the powerful bi-directional control features of LAUNCH X431 series. It allows you to control the system or component for active test on BMW/Mini/Rolls-Royce cars, helping check if the car actuators are all in good condition, such as windows, rear mirrors, wipers, horn test. You can also use it to recalibrate, readapt or reconfigure for some components after making repairs or replacement.
- [OE-LEVEL ALL SYSTEMS DIAGNOSTIC FOR YOUR BIMMER] As the Top-Dog in the market, LAUNCH is famous for its powerful diagnostic functions. 2024 newly upgraded LAUNCH X431 Elite 2.0 PRO fit for BMW/Mini/Rolls-Royce full diagnostic tool, provides you with All-Around & In-Depth diagnostic for all available modules. It supports to read/clear codes, view data stream, retrieves freeze-frame, read ECU information, and etc., which make you easily know the car situation and finger out problems soon.
Last update on 2024-03-30 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.