| “This site contains affiliate links for which OEMDTC may be compensated” |
October 17, 2019 NHTSA CAMPAIGN NUMBER: 19V745000
An unexpected loss of power while driving can increase the risk of a crash.
NHTSA Campaign Number: 19V745
Manufacturer Subaru of America, Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 251
Summary
Subaru of America, Inc. (Subaru) is recalling certain 2017 Impreza vehicles equipped with an aluminum Positive Crankcase Ventilation (PCV) valve. The PCV valve may come apart, allowing the separated components to enter the engine, possibly resulting in a loss of power while driving.
Remedy
Subaru will notify owners, and dealers will replace the engine, free of charge. The recall began December 3, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru’s number for this recall is WUS-04.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Subaru has a Recall
NUMBER: WUS-04R
NHTSA: 19V-745
DATE: 10/24/19
REVISED: 10/31/19
| APPLICABILITY: | 2017MY Impreza |
|---|---|
| SUBJECT: | PCV Valve- Design Change |
INTRODUCTION:
Subaru of America, Inc. (Subaru) is initiating a safety recall for certain 2017 model year Impreza vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Please note: while the reason and safety risk behind this recall are the same as WUP-01, this recall differs in the work process and remedy. Please confirm the vehicle is under WUS-04 by using the Vehicle Coverage Inquiry before proceeding further with this bulletin procedure.
AFFECTED VEHICLES:
| Model Year(s) | Carline | Production Date Range |
| 2017 | Impreza | May 11, 2016 – November 11, 2016 |
Not all vehicles in the production range listed above are affected by this recall. Coverage must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com prior to repair.
The status of this recall will display as “Open – Remedy Not Yet Available” until sufficient parts supply is available.
REASON FOR THIS RECALL:
The PCV valve may separate and allow engine oil to enter the combustion chamber, resulting in a visible change in appearance and/or the amount of tailpipe exhaust. If driving under this condition continues, separated components from the PCV valve may enter the engine.
SAFETY RISK:
If separated components from the PCV valve enter the engine, the vehicle may experience a loss of motive power, increasing the risk of a crash.
DESCRIPTION OF THE REMEDY:
Vehicles affected by this recall will require short block assembly replacement along with a new PCV valve and hose (kit).
OWNER NOTIFICATION:
Subaru will notify affected vehicle owners by first class mail within 60 days. Owners with a valid email address on file will also be notified by email. Retailers will be advised when the notification is scheduled.
RETAILER RESPONSIBILITY:
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $21,000 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement.
Any vehicles listed in any recall/campaign that are in retailer stock must be:
- Immediately identified.
- Tagged or otherwise marked to prevent their delivery or use prior to repair.
- Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin
Retailers are to promptly follow the applicable service procedures, to correct all affected vehicles in their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken into retailer inventory necessary steps should be taken to ensure the recall correction has been made before selling or releasing the vehicle.
PART INFORMATION:
Refer to the Subaru Electronic Parts Catalog for the short block and related item part numbers required.
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
A new parts kit, p.n. X1181AA000 consisting of a new steel PCV valve and hose will be available soon. The NEW -style PCV Valve is made of steel and has a BLUE ring above the hex portion as shown. The old -style is made of aluminum and has a PINK ring above the hex portion.
A photo of the new hose is also shown.
NOTE: The new p.n. X1181AA000 PCV valve kit is expected to be available in early November.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for short block assembly, PCV valve and hose replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
CALIFORNIA “VEHICLE EMISSION RECALL – PROOF OF CORRECTION” CERTIFICATE
The California Air Resources Board and the Department of Motor Vehicles Registration/Recall Program requires that all emission related Recall/Campaign or Service Program repairs be completed before a vehicle registration is renewed. Please provide owners of vehicles registered in the state of California a completed “Vehicle Emission Recall – Proof of Correction” certificate. Vehicle owners should be advised to retain this certificate because the California Department of Motor Vehicles may require they provide proof this service program repair has been completed.
Additional certificates are available through normal parts ordering channels using part number MSA6P1301. Quantity 1 = 1 booklet of 50 certificates.
| Part Number | Applicability | Description | Order Quantity |
| MSA6P1302 | All Models | Campaign Completion Labels (contains one sheet of 20 labels) | 1 |
SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identification Label.
The completed label should be attached to the vehicle’s upper radiator support. Additional labels are available through normal parts ordering channels. The part number is MSA6P1302, which comes as one sheet of 20 labels.
CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers may submit claims through Subarunet.com.
| Labor Description | Labor Operation # | Labor Time | Fail Code | Claim Type |
| REPLACE SHORT BLOCK, PCV VALVE AND HOSE | A145-635 | 12.2 | WUS-04 | RC |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
URGENT
IMPORTANT SAFETY RECALL
This notice applies to the VIN below
Subaru Safety Recall WUS-04
NHTSA Recall ID 19V-745
December 2019
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists in certain 2017 model year Impreza vehicles.
You received this notice because our records indicate that you currently own one of these vehicles.
REASON FOR THIS SAFETY RECALL
The PCV valve may separate and allow engine oil to enter the combustion chamber, resulting in a visible change in appearance and/or the amount of tailpipe exhaust. If driving under this condition continues, separated components from the PCV valve may enter the engine.
SAFETY RISK
If separated components from the PCV valve enter the engine, the vehicle may experience a sudden loss of power while driving, increasing the risk of a crash.
WHAT SUBARU WILL DO
In order to correct the issue with the PCV valve, it is necessary that Subaru replace the engine short block, which includes the PCV valve, in your vehicle.
What You Should Do
You should contact any authorized Subaru retailer (dealer) for an appointment to have this safety recall repair performed, at no cost to you.
HOW LONG WILL THE REPAIR TAKE?
The time required for this repair can be in excess of 12 hours. Your retailer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time.
For your convenience, your retailer may provide you with a loaner or rental vehicle, at no cost to you, until the repair is complete.
CALIFORNIA REGISTERED OWNERS
The California Air Resources Board requires that emission related campaigns be completed prior to California’s vehicle registration renewal process; without this repair, you will not be able to register your vehicle during your next annual registration. Upon completion of this campaign, your California dealer will complete and provide you a “Proof of Correction Certificate.” If required, present the certificate to the California Department of Motor Vehicles (the “DMV”) when renewing your California registration as proof of campaign completion. If the DMV does not request the certificate, we recommend that you keep it for your records.
In addition, the State of California requires that every vehicle must pass an emission test (SMOG Check) every two years and before it is sold. Without the repair we are providing at no charge, your vehicle may not pass this test.
OWNER INFORMATION
Government regulations require that recall notifications be sent to the last known owner of record. That information is based primarily on state registration and title data. If you are a lessor of this vehicle, federal regulations require you to forward this notice to your lessee within ten days.
If you have moved or sold your vehicle, please update this information online at www.subaru.com, select ‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the “Quick Links” menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement. Reimbursement consideration will be based on the amount an authorized Subaru retailer in your area would charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage at the time of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing address and telephone number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WUS-04 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt to process your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be completed.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’
For additional information, please go to: https://www.wus04.service-campaign.com.
If you need additional assistance, please contact us directly:
- By e-mail: Go to www.subaru.com and select “Customer Support”
- By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
- By U.S. Postal mail: Write us at Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification email System, please go to: https://wwwodi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration (NHTSA), 1200 New Jersey Ave., SE, Washington, DC 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
A subsidiary of SUBARU CORPORATION
Notice to Lessors
The lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s) within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the applicable vehicle identification number
(VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A leased vehicle is a vehicle leased to another person for a term of at least four months.)
Subarunet Announcement
To: All Subaru Retailers
From: Subaru of America, Inc.
Date: November 21, 2019
Owner Notification Schedule: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
WUP-01 Owner Notification Schedule
Owner notification letters for WUP-01 will be mailed from December 2 through December 16. Owners with a valid email address on file will also be notified by email once all of the postal mailings have been completed. In addition, the following will occur:
- December 16 – WUP-01 will appear in the recalls section of MySubaru.com.
- December 16 – MySubaru will alert customers on the homepage of the WUP-01 open recall.
- December 19 – Care Connect will have WUP-01 and will include it in Scheduled Maintenance Triggers and Recall Market Drivers
- December 19 – WUP-01 will be available in SOA-approved online schedulers – ScheduleConnect and Xtime. If you need assistance with configuration, please contact your CCAM (CareConnect Account Manager) or DPC (Xtime Dealer Product Consultant).
WUS-04 Owner Notification Schedule
Owner notification letters for WUS-04 will be mailed on December 3. Owners with a valid email address on file will also be notified by email. In addition, the following will occur:
- December 3 – WUS-04 will appear in the recalls section of MySubaru.com.
- December 3 – MySubaru will alert customers on the homepage of the WUS-04 open recall.
- December 6 – Care Connect will have WUS-04 and will include it in Scheduled Maintenance Triggers and Recall Market Drivers
- December 6 – WUS-04 will be available in SOA-approved online schedulers – ScheduleConnect and Xtime. If you need assistance with configuration, please contact your CCAM (CareConnect Account Manager) or DPC (Xtime Dealer Product Consultant).
Subarunet Announcement
| To: | All Subaru Retailers |
| From: | Subaru of America, Inc. |
| Date: | October 18, 2019 |
New Safety Recalls: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
Subaru of America, Inc. (Subaru) is initiating two new safety recalls for certain 2017-2019 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective.
- Vehicles affected by the WUP-01 recall will require an inspection and potential replacement of the PCV valve and hose.
- Vehicles affected by the WUS-04 recall will require a short block engine replacement, in addition to replacement of the PCV valve and hose.
Description of the Defect and Safety Risk
The PCV valve may separate and allow engine oil to enter the combustion chamber, resulting in a visible change in appearance and/or the amount of tailpipe exhaust. If driving under this condition continues, separated components from the PCV valve may enter the engine. If this occurs, the vehicle may experience a loss of motive power, increasing the risk of a crash.
Affected Vehicles
A total of 205,251 U.S. vehicles will be affected by these recalls, as listed below:
| Recall code | Model Year(s) | Carline | Production Date Range | Affected vehicle count |
| WUP-01 | 2017-2019 | Impreza | July 28, 2016 – March 8, 2018 | 121,501 |
| WUP-01 | 2018 | Crosstrek | May 9, 2017 – April 2, 2018 | 83,499 |
| WUS-04 | 2017 | Impreza | May 11, 2016 – November 11, 2016 | 251 |
Not all vehicles in the production ranges listed above are affected by these recall. Coverage must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com prior to repair. This coverage information is now available.
The status of these recalls will display as “Open – Remedy Not Yet Available” until sufficient parts supply is available.
Service, Parts, and Claim Instructions
Sufficient parts supply is expected to be available within the next month. Retailers will be notified when parts are available.
For detailed service, parts, and claim information, please refer to the WUP-01 and WUS-04 Product
Campaign Bulletins on STIS, which will be posted next week. PCV Valve kits must be ordered through PRIME. Please refer to ‘Recalls & Campaigns/PRIME Max Quantities’ on subarunet for the orderable quantities.
Retailer Responsibility
Any vehicles listed in any recall/campaign that are in retailer stock must be:
- Immediately identified
- Tagged or otherwise marked to prevent their delivery or use prior to repair
- Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin
Retailers are to promptly perform the applicable service procedures, once they are available, to correct all affected vehicles in their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken into retailer inventory necessary steps should be taken to ensure the recall correction has been made before selling or releasing the vehicle.
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $21,000 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement.
Owner Notification
Subaru will notify affected vehicle owners by first class mail within 60 days. Owners with a valid email address on file will also be notified by email. Retailers will be advised when the notification is scheduled.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| SUBARU | IMPREZA | 2017 |
13 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-19V745-6870.pdf 232.915KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #2, 2020-1
RCLQRT-19V745-1269.PDF 211.232KB
Loading...
Remedy Instructions and TSB
RCRIT-19V745-2797.pdf 1301.989KB
Loading...
Recall Quarterly Report #1, 2019-4
RCLQRT-19V745-4506.PDF 211.132KB
Loading...
Manufacturer Notices(to Dealers,etc)- Owner Notification Schedule: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
RCMN-19V745-8809.pdf 155.036KB
Loading...
Recall Acknowledgement
RCAK-19V745-6729.pdf 244.555KB
Loading...
Remedy Instructions and TSB
RCRIT-19V745-8237.pdf 1080.491KB
Loading...
Manufacturer Notices(to Dealers,etc)- Part Ordering Information
Loading...
Chronology
RMISC-19V745-8813.pdf 99.706KB
Loading...
Manufacturer Notices(to Dealers,etc) – New Safety Recalls: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
RCMN-19V745-5566.pdf 206.729KB
Loading...
Defect Notice 573 Report
RCLRPT-19V745-2752.PDF 214.175KB
Loading...
Recall Quarterly Report #3, 2020-2
RCLQRT-19V745-2592.PDF 211.315KB
Loading...
Recall Quarterly Report #4, 2020-3
RCLQRT-19V745-9669.PDF 211.423KB
Loading...
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V745&docType=RCL
NHTSA ID Number: 10166945
Manufacturer Communication Number: WUS-04
Summary
Subaru of America, Inc. (Subaru) is initiating a safety recall for certain 2017 model year Impreza vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Please note: while the reason and safety risk behind this recall are the same as WUP-01, this recall differs in the work process and remedy.
NUMBER: WUS-04
DATE: 10/24/19
NHTSA: 19V-745
https://www.nhtsa.gov/recalls?nhtsaId=10166945
https://static.nhtsa.gov/odi/tsbs/2019/MC-10166945-0001.pdf
Loading...
| “This site contains affiliate links for which OEMDTC may be compensated” |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle.
- [Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
- [Worthy to Own] Recommended by most professional mechanics on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, F-ree Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
- [S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test.
- [Home Necessity] Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and great choice for Home and Autoshop Mechanics.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- LCD Display - Designed with a clear display LCD screen (128 x 64 pixels) - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 🔥【On-Screen DTC Definition, Save Time & Easy To Use】Autel MS309 OBD2 code reader with UPGRADED CHIP to retrive and clear generic(P0, P2, P3 and U0), manufacturer-specific(P1, P3 and U1) and pending codes, and display DTCs(Diagnostic Trouble Codes) meanings under the codes based on the built-in database(more than 3000 codes). Don't need to spend much time to search meanings on the internet. This advanced plug-and-play MS309 scanner saves you time - a must-have obd2 scanner for each car owner.
- 🔥【Retrieve Freeze Frame Data &Vehicle info】The more specific the information available, the clearer the problem. The OBD2 scanner MS309 can retrieve freeze frame data, including important engine parameters like RPM, fuel pressure, fuel trim, engine coolant temperature, etc. Also it can retrieve Vehicle Information such as VIN number, Calibration ID(s), Calibration Verification Nos. (CVNs), etc, which is useful to check whether the ECU matches when you are buying a used car.
- 🔥【Read Codes & Clear Codes】Knowing the codes in advance will brace you for the repair cost estimate so that you won't be fooled and get overcharged by the repair shop.This Autel MaxiScan MS309 obd2 scanner scans OBD2-compliant vehicle Diagnostic Trouble Codes (DTCs) in seconds to pinpoint emission-related issues. The little guy can do many basic but necessary works: read/clear codes, view DTC definition, turn off check engine light, check I/M Readiness status, retrieve freeze frame data and vehicle info.
- 🔥【Turn Off Check Engine Light】When your car detects an emission related problem, Check Engine Light will be turned on. Do you want to spend hundreds of dollars to turn off this light every time, maybe it's just a gas cap that's not tightened or needs to change bad parts like spark plugs and ignition coils? With Autel MS309 scan tool, you can read code to quickly find out why the check engine light is on and reset it.
- 🔥【Ready For Annual Smog Check】If the OBD II Readiness Monitors on your car are not “Ready”, your car may fail the smog check. MS309 OBD2 scanner can retrieve I/M Readiness status to check the monitors like misfire monitor, fuel system monitor, comprehensive components monitor, catalyst monitor, O2 sensors, EVAP, etc, to help your car ready pass the annual smog check. That way you won't waste time and money on a failed smoke check.
- 【TURN OFF CEL】 This AL319 car diagnostic tool supports Reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off, to help you detect any potential problems, and to avoid excessive costs for unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.
- 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- WIDE COMPATIBILITY - Recommended by YouTube star Scotty Kilmer on his channel. Works on most vehicles sold in the U.S. with a model year of 1996 or newer; Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network); Displays in English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese; Requires no battery or charger as the unit is powered directly from the OBDII Data Link Connector in the vehicle.
- CRITICAL FUNCTIONALITY - Quickly reads and clears stored emissions-related codes, pending codes, and displays code definitions. Turns off the MIL (check engine light), helps reset the monitor before you take the car to smog, and lets you know what's going on before you take the car in for repairs.
- ENHANCED OBDII DIAGNOSTICS - Supports O2 sensor and EVAP (evaporative control) system test. The AD410 code scanner can be used to initiate a leak test of a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 sensor test is used to monitor and adjust the air/fuel mixture, which can identify and correct problems related to fuel efficiency and vehicle emissions.
- QVGA DISPLAY & NEW UI - The AD410 code reader is a greatly improved upgrade from simpler diagnostic tools. It features a 2. 4" TFT true color display (262K) LCD for clear viewing of test results. With the clear design UI, users can easily access setup, OBDII diagnostics, I/M readiness and DTC search and check. No need to read the manual to know what to do, even for a beginner.
- DIAGNOSTIC REPORTS & UPDATE - The Review & Print option allows you to save or print diagnostic reports as needed. The ANCEL brand offers lifetime free software updates for this unit to fix the latest bugs or add new parameters. Simply download the software from the ANCEL website and then follow the on-screen instructions to install it.
- Multi-Functions OBD2 code reader: OBD Scanner has the professional-grade OBD functions you need to help fix the cause of your engine light. It can pinpoint the cause of warning lights, provide accurate and fast results, it's your time and money saver. Car diagnostic scanner functions include: Read and Clear DTC, view Freeze frame, read I/M readiness, retrieve Vehicle info, Live data, Data stream, built-in 35,901 DTC library, Voltage test, RT curve, 02 sensor test, EVAP.
- Wide Compatibility: The OBD2 code reader is truly compatible with over 98% of vehicles. Car OBD2 Scanner Code Reader supports up to 9 protocols and is compatible with most cars after 1996 (USA), 1998 (Canada), 2002 (EU), and 2008 (Asia). Work with 12V diesel vehicles too. Notes: CAN Diagnostic Scan Tool not compatible with new energy vehicles, hybrid vehicles, diesel engines, and vehicles that do not comply with the OBD2 protocol. Please refer to your vehicle model before purchasing.
- 35,901 DTC Data Lookup: Unlike traditional mode car diagnostic scanners, this innovative Engine Fault Code Reader Scanner for All OBDii Protocol Cars Since 1996 has a database of up to 35,901 DTCs, which can quickly help diagnose and resolve your vehicle's issues, saving you time and surpassing the functionality of most conventional OBD databases on the market. Plug and play OBD2 Scanner tester, no need for batteries or chargers, environmentally friendly and convenient.
- User-Friendly Design: The 2.8-inch color OBD2 gauge display (240 x 320 pixels) is clear and visible in various lighting conditions, enhancing your user experience. The 90cm cable is made of flexible insulated material for a comfortable feel and increased safety. It weighs 210g and measures 7.0 x 3.4 x 0.9 inches. OBD2 scanner Supports 8 languages: English, German, Chinese, Spanish, French, Italian, Russian, Dutch.
- Not Compatible with ABS-Airbag Codes: This full ODB2 error code reader is specifically designed to diagnose and clear engine-related faults and is not suitable for non-OBDII fault inquiries, such as ABS-airbag-SRS codes, etc. The device features three intelligent indicator lights for a more intuitive experience, making it suitable for beginners, vehicle owners, home mechanics, car enthusiasts, as well as service and maintenance technicians.
- 🙂[Compact But Powerful]: A-premium AD100 is a powerful multi-functional check engine code reader, it brings together a variety of mainstream functions in one, can easily and efficiently check the cause of the check engine light on, but also can accurately read the fault code, and after you fix the problem, clear the fault code, let your car back to health. If you don't understand the fault code, that's OK! the car code reader has a built-in DTC library, with 100000 DTC data for you to look up
- 🙂[Versatile Assistant]: This obd2 scanner also has many practical features that can help you effectively diagnose the specific cause of car failure, such as: view freeze frame, read data stream, show real-time curve (fuel system, engine speed, coolant temperature, load value ...) , view car information, O2 sensor test, EVPA system test and etc. with these functions, you can quickly know whether the car is in a state of health, saving you precious time and much cost (pay to garages lol lol !!!)
- 🙂[Useful I/M Readiness Test]: Still worried about your car passing sm-og check? And you don't want to spend a lot of diagnostic money taking your car to local garages to checked it out. Don't worry, AD100 code readers & scan tools built-in I/M monitor readiness function allows you to accurately read and obtain data (MIL, fuel system, misfire, catalyst...), and with this data, you can know if your car meets the check standards
- 🙂[Simple But Useful - Battery Test]: This car diagnostic scanner has a battery test function, just sit in the driver's seat, you can check the real-time voltage of the 12V battery, and confirm whether the current battery age is serious. With it, you don't have to open the hood, and use battery voltage tester to check, so that you are more convenient. In the market, battery testing is only installed on more advanced scanner, but our team built it into the AD100 so that anyone can experience it
- 🙂[Easy to Use]: The fixd car diagnostic tool has a 1.77-inch display and a 3.3-foot-long cable that allows you to see details in dim environment.The car scanner has an advanced 32bit cpu, which can easily deal with daily operation. The body shell is made of strong plastic, which will not be damaged if accidentally dropped to the ground, while ensuring the normal operation of the obd scanner.The appearance and buttons are all humanized, and the grip and operation are very comfortable
- Auto Scanner Case Perfect Fit: This mini code readers & scan tools carrying case is perfect for BlueDriver Bluetooth Pro OBDII OBD2 LSB2 Scan Tool for iPhone & Android, Veepeak OBDCheck BLE OBD2 Bluetooth Scanner Auto OBD II Diagnostic Scan Tool, Dimension: 3.14 x 2.56 x 1.6 inches.
- Compact&Lightweight, Hard and Skid-Proof obdii scanner bluetooth Storage Bag: Made of hard EVA material with soft touch PU leather surface,It provides a full range of protection for your car code reader, it’s not only easy to store bluedriver LSB2 Diagnostic Scan Tool indoors prevent loss, but also can be fully prepared for outdoor activities in your car or truck, easy for you to read and clear your Check Engine Light and all other vehicle systems.
- 100% safe car scanner reader case holder: The Blue Driver OBDII scanner fits snugly in this case, without any looseness inside, keep your obd2 scanner safety all the time, this scanner tool case is sturdy, easy to open and close. You don't have to worry about damaging the OBD2 Diagnostic Scan Tool 'when' I accidentally drop the case or knock it to the ground.
- Portable Carrying Auto Mini Case: It is really compact and space saving, easy for you to carrying it anywhere, you can put it in your purse, pocket, backpack or just keep it in your car. You can always check up your vehicle with fixd car diagnostic tool, perfect as a gift for your friends, husband, father and someone who own a OBD2 Diagnostic Scan Tool.
- NOTE: For sale is only a case, not include the bluedriver obd2 scanner and other accessories, with any quality problem, please contact us directly, we will always on your service.
Last update on 2024-04-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.