Water Leak from the Map Light Area – 2010-2013 Subaru Legacy & Outback

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10117544

Manufacturer Communication Number: 12-117-10R

Summary

MODELS WITH SUNROOFS ONLY. If you encounter a customer complaint of water leaking into the interior of the vehicle from the map light area, the following 2 areas should be inspected closely for a potential source or cause:

* The leak could be caused by water leaking past the sunroof cable mechanism. To remedy the condition, silicone sealer will need to be carefully applied to both of the front end caps.

* One or both of the sunroof drain tubes may be kinked or restricted causing water accumulated in the frame assembly to overflow and leak into the interior.

 


NUMBER: 12-117-10R
DATE: 03/30/10
REVISED: 05/10/16

APPLICABILITY: 2010~2013MY Legacy and Outback equipped with Sunroof
SUBJECT: Water Leak from the Map Light Area

 

INTRODUCTION

If you encounter a customer complaint of water leaking into the interior of the vehicle from the map light area, the following 2 areas should be inspected closely for a potential source or cause:

 

  • The leak could be caused by water leaking past the sunroof cable mechanism. To remedy the condition, silicone sealer will need to be carefully applied to both of the front end caps.

Sunroof Frame Assembly

 

  • One or both of the sunroof drain tubes may be kinked or restricted causing water accumulated in the frame assembly to overflow and leak into the interior.
  • Refer to the repair procedures listed below for the associated Service Procedures.

 

sunroof drain tubes

 

PARTS INFORMATION

PART DESCRIPTION SOA ITEM NUMBER QUANTITY
3M Ultrapro High Temp Silicone Gasket 08672 Black 3 oz. SOA868V9610eBay 1

 

SERVICE INFORMATION/PROCEDURE

Drain Hose(s) Kinked / Blocked:

  • Open the sunroof completely and water test each drain by carefully pouring water into the front corner areas of the sunroof frame where the drain hoses connect. The water should flow freely through the drains and hoses as it is poured, exiting the vehicle at the base of the corresponding side “A” pillar area.  If a drain or hose is blocked or clogged, careful application of compressed air may free the restriction.  If a drain hose is determined to be kinked or the blockage cannot be cleared, replace it following the procedure in the applicable Service Manual.

IMPORTANT:  Always retest and confirm proper drainage / flow after any repairs are made.

 

Resealing the End Caps:

  1. Confirm the water leak as reported.
  2. Open the sunroof fully (glass panel all the way back).
  3. Carefully push and hold the sunroof air deflector down to gain access. The deflector will need to be held in that (down) position while performing this procedure.
  4. Clean any dirt and/or grease in the area around both of the front end caps of the sunroof cable.

Clean the area around the end cap.

 

  1. Apply sealant under the front of the end cap ensuring that the silicone is filling the gap.

NOTE: Make sure the nozzle being used is small enough to apply sealant into the gap.

Squeeze sealant into gap under front of cap.

 

  1. Using a right-angled pick tool (pictured below) or equivalent, move a small amount of the sealant around both sides and along the bottom of the end cap to ensure the seam is filled.

Move sealant around sides to fill seam.

  1. Apply additional sealant on the front and rear sides and top seams of the end cap. Use the pick tool to smooth the sealant as you apply it. Make sure the sealant covers all seams of the end cap. Use a mirror if necessary to verify all seams are covered.

NOTE: Be careful not to apply too much sealant as this will add to cleanup.

  1. Perform this procedure to the end caps on both sides of the sunroof.

Apply sealant around all seams of end cap

 

  1. Operate the sunroof air deflector manually and remove any excess sealant material.
  2. Allow plenty of time for the sealant to cure fully.
  3. Perform water testing to recheck for leaks.

 


8 Affected Products

Vehicles

MAKE MODEL YEAR
SUBARU LEGACY 2010-2013
SUBARU OUTBACK 2010-2013

 


1 Associated Document

Manufacturer Communications

NUMBER: 12-117-10R
DATE: 03/30/10
REVISED: 08/28/17

https://www.nhtsa.gov/recalls?nhtsaId=10117544

MC-10117544-9999.pdf 570.871KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [557.49 KB]

 


NHTSA ID Number: 10232861

Manufacturer Communication Number: 1211710R

Summary

Water Leak from the Map Light Area

 

1 Associated Document

Manufacturer Communications

NUMBER: 12-117-10R
DATE: 03/30/10
REVISED: 02/14/13

https://www.nhtsa.gov/recalls?nhtsaId=10232861

MC-10232861-9999.pdf 1325.723KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.26 MB]

 


 

Bestseller No. 1
Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, Sensor Safe And Non-Corrosive, For High Flex And Oil Resistant Applications 3 oz
  • Non-Corrosive Formula - Ultra Black Maximum Oil Resistance Silicone Gasket Maker Is Sensor-safe; With A Non-Corrosive Formula Designed For Superior Adhesion To Oily Surfaces And Long Term Durability
  • Superior Resistance - Powertrain Fluids Including Engine Oil, Transmission Fluid, Gear Lube And Coolants To Keep Your Application Locked In Place To Create A Strong Long Lasting Seal
  • High Flexibility - Ultra Black Silicone Gasket Maker Retains High Flexibility And Oil Resistant Properties And Can Be Used To Replace Pre Cut Gaskets Or Be Used As A Gasket Maker Or Gasket Sealant
  • Long-lasting And Durable - Ultra Black Resists Aging, Weathering And Thermal Cycling Without Hardening, Shrinking Or Cracking. With A Temperature Range Of -65°f To 500°f (-54°c To 260°c) Intermittent
  • Suggested Applications: Valve Covers And Valve Guides, Oil Pans, Transmission Pans, Intake Manifold End Seals, Timing Gear Covers, And Differential Covers
Bestseller No. 2
J-B Weld 31314 High Temperature RTV Silicone Gasket Maker and Sealant - Red - 3 oz.
  • HI TEMP RED SILICONE GASKET MAKER & SEALANT: Is an RTV (Room Temperature Vulcanized) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550º F or 650º F intermittent might exist
  • COUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world's strongest bond for your projects
  • EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe
  • VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond
Bestseller No. 3
Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker, Sensor Safe And Non-Corrosive, For High Torque And Vibration Resistant Applications, 3 oz
  • High Performance Formula - Ultra Grey Silicone Gasket Maker is Sensor-Safe, With a Non-Corrosive Formula Designed to Provide Reliable “Formed-in-Place” Gaskets for Mechanical Assemblies
  • Vibration Resistant - Permatex Ultra Grey Offers Maximum Vibration Resistance, Withstanding High Torque Loads While Creating a Tough, Flexible, Silicone Rubber Gasket
  • Long-Lasting Durable Silicone Gasket - Resists Aging, Weathering, and Thermal Cycling Without Hardening, Shrinking, or Cracking with Temperature Resistance from -65°F to 500°F (-54°C to 260°C).
  • Multi-Purpose Gasket Material - Ultra Grey Silicone Gasket Maker Retains High Torque and Vibration Resistance and Can Be Used to Replace Pre Cut Gaskets or Be Used as a Gasket Maker or Gasket Sealant
  • Suggested Applications: Valve Covers, Water Pump Housings, Intake Manifold End Seals, Thermostat Housings, Timing Gear Covers, Transmission Pans, and Oil Pans
Bestseller No. 4
Permatex 24105-12PK Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 13 oz. (Pack of 12)
  • Fast-curing formula is sensor safe, low odor and non-corrosive
  • Retains high flexibility, oil resistance properties through use of a patented adhesion system
  • Ensures extended drivetrain warranty compliance
  • Temperature range -65F to 550F intermittent
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans
Bestseller No. 5
Permatex 81158-12PK Black Silicone Adhesive Sealant, 3 oz. Tube (Pack of 12)
  • General-purpose, black RTV indoor/outdoor sealant bonds, repairs, seals, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops
  • Protects and repairs electrical wiring
  • Works effectively on both horizontal and vertical surfaces
  • Waterproof and flexible with a temperature range of -75 degrees Fahrenheit to 450 degrees Fahrenheit
  • Oil, water, weather, vibration and grease resistant
Bestseller No. 6
Permatex 81630 Ultra Red High Temperature Gasket Maker, 3 oz
  • High temperature performance, adhesion and flexibility
  • OEM Specified, Sensor-safe, low odor, non-corrosive
  • Non-flammable, non-toxic
  • Can be used as a gasket maker or dressing and meets performance specs of OE silicone gaskets
  • Withstands up to 650°F (399°C) intermittent
Bestseller No. 7
Permatex 85080-6PK Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 9.5 oz. PowerBead Can (Pack of 6)
  • Fast-curing formula is sensor safe, low odor and non-corrosive
  • Retains high flexibility, oil resistance properties through use of a patented adhesion system
  • Ensures extended drivetrain warranty compliance
  • Temperature range -65F to 550F intermittent
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans
SaleBestseller No. 8
Permatex 82194-12PK Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker, 3 Ounce (Pack of 12)
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids
  • OEM specified, guaranteed not to leak
  • Low odor and non-corrosive formula
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Bestseller No. 9
Permatex 81409 High-Temp Red RTV Silicone Gasket, 11 oz.
  • Formulated for high temperature applications or heavy-duty use (such as towing); resists auto and shop fluids
  • Replaces almost any cut gasket by making reliable "formed-in-place" gaskets that resist cracking, shrinking and migrating caused by thermal cycling
  • Coats pre-cut gaskets to increase reliability
  • Temperature Range: -65°F to 650°F (-54°C to 343°C) intermittent
  • Suggested Applications: Valve covers, oil pans, timing covers, water pumps, and thermostat housings
SaleBestseller No. 10
J-B Weld 32929 Ultimate Black RTV Silicone Gasket Maker and Sealant - 9.5 oz.
  • HI TEMP SILICONE GASKET MAKER & SEALANT: Is an RTV Silicone gasketing material, designed for use in mechanical assemblies where continuous temperatures up to 550º F or 650º F intermittent exist
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
  • EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe
  • VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond

Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

1
Share to...