“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10233117
Manufacturer Communication Number: 077413
Summary
Memory Height and / or Temporary StopFeatures Inoperative
NUMBER: 07-74-13
DATE: 04/29/13
APPLICABILITY: | 2014MY Forester Models with Power Rear Gate |
---|---|
SUBJECT: | Memory Height and / or Temporary Stop Features Inoperative |
INTRODUCTION
This Bulletin provides a repair procedure for the following two conditions:
- The power rear gate (PRG) system Memory Height and / or Temporary Stop feature is completely inoperative.
- The inability of the PRG to remain stopped in a partially open position once commanded to do so (Temporary Stop failure). Instead, the rear gate will stop briefly while opening then proceed to the full open position.
The cause is a small burr which can restrict the movement of the plunger in the drive unit stop actuator. In addition, DTC B2523 may be stored in the BIU (body integrated unit) memory.
TARGET VEHICLES
For this Service Bulletin, the specific range of VINs listed below have the possibility of being affected:
E*400124 to E*401324
PART INFORMATION
PART NAME | PART NUMBER |
---|---|
DRIVE UNIT AY PRG | 63320SG000 |
SERVICE PROCEDURE / INFORMATION
- Upon confirmation of the symptom(s) described in the introduction, replace the complete power rear gate drive unit assembly following the procedure in the applicable Service Manual.
- After installation is complete, perform the function check procedure below:
- Close the rear gate fully.
- Start the engine.
- Turn on the headlights to create a high current draw condition on the electrical system.
- Confirm the power rear gate Memory Height and Temporary Stop features operate normally two or three times before releasing the vehicle.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SUBARU | FORESTER | 2014 |
1 Associated Document
Manufacturer Communications
NUMBER: 07-74-13
DATE: 04/29/13
https://www.nhtsa.gov/recalls?nhtsaId=10233117
NHTSA ID Number: 10068200
Manufacturer Communication Number: 07-74-13
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1 Associated Document
Service Bulletin Document
NUMBER: 07-74-13
DATE: 04/29/13
https://www.nhtsa.gov/recalls?nhtsaId=10068200
“This site contains affiliate links for which OEMDTC may be compensated” |
- Part Number: 63269SG032 63269sg022
- Compatible with:2014-2018 Subaru Forester 2.0L,2014-2018 Subaru Forester 2.5L,Not Applicable to Automatic Lifting
- Location:Rear door lift bracket left+right
- Installation: easy to install, please see the description page for detailed installation steps
- If there is any problem with our products, please contact us, we will reply to your email within 24 hours, thank you for your attention and support!
- Location: For Tailgate (left+right)
- Compatible with: Subaru Legacy 2010-2014︱Subaru Outback 2010-2014 (Excluding Forester) It comes with Brackets.
- OEM: 63269AJ00A︱63269AJ01A︱63269AJ10D︱63269AJ10B︱63269AJ10C︱63269AJ11B︱63269AJ11C︱63269AJ11D︱
- Product Advantages:1.Tailgate lift support uses gas springs to easily open and close the tailgate .(Using High Pressure Nitrogen Gas And Silicone Oil As Damper).2.Made of high-quality Steel material,Strong and durable,and exact equivalent part meets the original manufacturer's specifications and features.
- Installation Method: Easy to install.No drilling,only needs to remove the original bolts and fasten the shock absorber bracket and then tighten the bolts.
- Fitment: for Subaru Forester 2014-2018
- Replace Part Number: 63270-SG000. Please double check the part number of your own one.
- Function: The lift door release switch is a component that replaces your vehicle and releases the lift door latch to allow the tailgate to be opened.
- Material: Liftgate Release Switch is made from durable materials, lightweight,reliable performance, not easy to deform,and long service life.
- Easy installation: No complex tools, direct installation, plug and play, direct replacement to your original unit.
- Value Pack of 2: Enjoy a cost-effective solution with this listing that includes 2 high-quality automotive lift supports, designed for your Tailgate. Fits many 2010, 2011, 2012, 2013 and 2014 Subaru Legacy, Subaru Outback and more
- Optimal Extended Length: These lift supports boast an extended length from center mount to center mount measuring 22.91 inches, ensuring reliable and efficient support for your vehicle's Tailgate, Liftgate, Trunk or Hatch
- Compatibility: Trust in the compatibility of these lift supports with a range of OEM numbers, including PM3074L-R, 63269AJ10C, 63269AJ00A, 63269AJ10B, 63269AJ10D, 63269AJ11D, 63269AJ01A, 63269AJ11B, 63269AJ11C. If you have any questions, please review the OEM numbers on your original support and reach out to us. We can then confirm whether this lift support is the correct replacement or if another is appropriate
- Premium Quality Lift Struts: Lift Supports Depot provides lift supports that are synonymous with quality. Crafted to meet high standards, these struts offer durability and performance, giving you confidence in your purchase
- Easy-to-Follow Instructions Included: Lift Supports Depot's high-quality lift struts are designed for hassle-free installation in minutes, and often require no special tools. Enjoy a quick and convenient setup process
- 【Replacement Part Number】 - #63269SG032, 63269SG022, 17K1001, 17K1002, PM3848L-R showa. Before ordering, please confirm compatibility and weather are suitable for your vehicle!
- 【Compatible Vehicle】 - This rear door tailgate lift support struts compatible with 2014-2018 Subaru Forester.
- 【Advantage】 - It’s easy to install, durable and corrosion-resistant, wear-resistant, heat-resistant, strong impact resistance, and good overall performance. More convenient to directly replace old or damaged.
- 【High Performance】 - This newest tailgate lift support, which is made of high durable material, the quality meets or exceeds OEM standards. 100% Tested Before Leaving The Factory.
- 【After-Sales Service】 - We have 1 year warranty, Worry-free Return And Refund Policy, Please Buy With Confidence!If You Have Any Questions About our product Please Contact Us,We Will Deal With It As Soon As Possible!
- [Perfect Fitment]: Compatible with Subaru Legacy 2010-2014 Sedan, Outback 2010-2014 Wagon---Rear Tailgate, Left and Right Side; It comes with Brackets.
- [Note]: It comes with Brackets. Does not fit Forester or Impreza Outback.
- [Reference Number]: The A-Premium Lift Support's reference number: PM3074L-R, PM3074L, PM3074R, 63269AJ00A, 63269AJ10B, 63269AJ10C, 63269AJ10D, 63269AJ01A, 63269AJ11B, 63269AJ11C, 63269AJ11D. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system.
- [About Package]: Package includes 2 pieces Lift Supports. Strong package with thick cardboard and air column bag, which provides shock absorption and protection during transportation.
- [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee. Being brand new and sturdy, this lift supports is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile.
- Value Pack of 2: Enjoy a cost-effective solution with this listing that includes 2 high-quality automotive lift supports, designed for your Tailgate. Fits many 2015, 2016, 2017, 2018 and 2019 Subaru Outback and more
- Optimal Extended Length: These lift supports boast an extended length from center mount to center mount measuring 21.06 inches, ensuring reliable and efficient support for your vehicle's Tailgate, Liftgate, Trunk or Hatch
- Compatibility: Trust in the compatibility of these lift supports with a range of OEM numbers, including PM3782, 583173, 568355, 63260AL03A, 63260AL03B, 63260AL02B, 63260AL02A, 63260AL03A-Left, 63260AL03B-Left, 63260-AL02A, 63260-AL02B, 63260-AL03A, 63260-AL03B,. If you have any questions, please review the OEM numbers on your original support and reach out to us. We can then confirm whether this lift support is the correct replacement or if another is appropriate
- Premium Quality Lift Struts: Lift Supports Depot provides lift supports that are synonymous with quality. Crafted to meet high standards, these struts offer durability and performance, giving you confidence in your purchase
- Easy-to-Follow Instructions Included: Lift Supports Depot's high-quality lift struts are designed for hassle-free installation in minutes, and often require no special tools. Enjoy a quick and convenient setup process
- Fitment: Compatible with Subaru Legacy Outback Wagon 2010 2011 2012 2013 2014 Replacement 63269AJ00A 63269AJ01A 63269AJ10B 63269AJ10C 63269AJ10D 63269AJ11B This may be an excellent solution for damage to the original parts. Our products can provide you with an experience comparable to the original parts!
- Strict quality inspection: the products are manufactured, enter the warehouse and dispatch orders, they are all inspected by dedicated personnel. The three real-person inspections ensure that the products are foolproof and provide you with a good experience!
- Saving money: replacing the original parts often requires going to a professional car repair shop, which will cost you a huge amount of money and waste your precious time. With our products, you no longer need to go to a professional car repair shop to pay expensive Price, only need to spend a small amount of money, you can solve your problem
- Installation: We can provide you with complete installation tutorials and technical guidelines. Regarding product installation methods and usage suggestions, as well as inquiries about suitable models, you can take the initiative to send us an email to get a reply!
- About us: GXARTS provides two-year quality assurance service. After you purchase any of our products, product quality problems occur within two years. You can contact us with a screenshot of the product problem, and we can provide you with free return and exchange services!
- Value Pack of 2: Enjoy a cost-effective solution with this listing that includes 2 high-quality automotive lift supports, designed for your Tailgate. Fits many 2005, 2006, 2007, 2008 and 2009 Subaru Legacy, Subaru Outback and more
- Optimal Extended Length: These lift supports boast an extended length from center mount to center mount measuring 22.83 inches, ensuring reliable and efficient support for your vehicle's Tailgate, Liftgate, Trunk or Hatch
- Compatibility: Trust in the compatibility of these lift supports with a range of OEM numbers, including PM1038R, PM1038L-R, 6222L, 6222R, P7988, 63269AG011, 63269AG001, 63269-AG011,. If you have any questions, please review the OEM numbers on your original support and reach out to us. We can then confirm whether this lift support is the correct replacement or if another is appropriate
- Premium Quality Lift Struts: Lift Supports Depot provides lift supports that are synonymous with quality. Crafted to meet high standards, these struts offer durability and performance, giving you confidence in your purchase
- Easy-to-Follow Instructions Included: Lift Supports Depot's high-quality lift struts are designed for hassle-free installation in minutes, and often require no special tools. Enjoy a quick and convenient setup process
- Air Flow and Privacy:This screen tent provides extra space and privacy with a large shade area and closed-off private space. The zippered mesh screen allows for ventilation and keeps bugs out to get a quiet sleep. It comfortably fits tables, chairs, and up to 5-6 people when fully opened. It is an outdoor camping essential when camping,trip,or simiply enjoying a day in the great outdoors.
- Easy Setup and Convenient to Carry:This camping tent is incredibly easy to set up and take down in minutes by one person.Lightweight to carry and compact to store,the convenience of this sun shade tent is unmatched,it provides a quick and easy way to create shade and shelter on the go.
- Wind and Water Resistant:Made from 210T polyester fabric,coated with silver PU and featured with 3000 MM waterproof rating,which means this 2 person tent can effectively block 90% of sunlight and keep you dry in the rain.Additionally,this camping tent also includes 4 wind guy-lines and 2 stakes to ensure the stability even on the windy days.
- Off Ground Sleeping:Designed with the elastic sleeve,this tent can universal fit securely on the back of most SUV, making it the ideal choice for camping,trip, Music Festivals, Outdoor Events or Wherever/Whenever You want to have an off ground Sleep. Even if You Drank Too Much, You could Sleep outdside comfortably and safetly.
- Off Ground Sleeping:Designed with the elastic sleeve,this tent can universal fit securely on the tailgate, making it the ideal choice for camping,trip, Music Festivals, Outdoor Events or Wherever/Whenever You want to have an off ground Sleep. Even if You Drank Too Much, You could Sleep outdside comfortably and safetly.
Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: 07-74-13; Date: 04/29/13 Page 1 INTRODUCTION This Bulletin provides a repair procedure for the following two conditions: • The power rear gate (PRG) system Memory Height and / or Temporary Stop feature is completely inoperative. • The inability of the PRG to remain stopped in a partially open position once commanded to do so (Temporary Stop failure). Instead, the rear gate will stop briefly while opening then proceed to the full open position. The cause is a small burr which can restrict the movement of the plunger in the drive unit stop actuator. In addition, DTC B2523 may be stored in the BIU (body integrated unit) memory. NUMBER: 07-74-13 DATE: 04/29/13 APPLICABILITY: 2014MY Forester Models with Power Rear Gate SUBJECT: Memory Height and / or Temporary Stop Features Inoperative SERVICE BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS “ISO 14001 COMPLIANT” The international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Power Rear Gate Assembly w/Drive Unit Stop Actuator (circled) Plunger Burr Close-up of Drive Unit Stop Actuator Bulletin Number: 07-74-13; Date: 04/29/13 Page 2 TARGET VEHICLES For this Service Bulletin, the specific range of VINs listed below have the possibility of being affected: E*400124 to E*401324 PART INFORMATION PART NAME PART NUMBER DRIVE UNIT AY PRG 63320SG000 SERVICE PROCEDURE / INFORMATION • Upon confirmation of the symptom(s) described in the introduction, replace the complete power rear gate drive unit assembly following the procedure in the applicable Service Manual. • After installation is complete, perform the function check procedure below: 1. Close the rear gate fully. 2. Start the engine. 3. Turn on the headlights to create a high current draw condition on the electrical system. 4. Confirm the power rear gate Memory Height and Temporary Stop features operate normally two or three times before releasing the vehicle. WARRANTY / CLAIM INFORMATION For vehicles within the Basic New Car Limited Warranty period, refer to the Subaru Labor Time Guide accessible on Subarunet.
SEOCONTENT-END