MSA5M1716A – Audio System Owner’s Manual – 2017 Subaru BRZ

“This site contains affiliate links for which OEMDTC may be compensated”

Owner Manual

2017 BRZ Audio System Owner’s Manual

MSA5M1716A

 


Foreword

This supplement contains explanations and instructions for correctly operating the following systems.

  • Audio and Visual System
  • Handsfree System
  • APPS

If your vehicle contains one of the systems above, be sure to check the contents of this supplement carefully.

If you transfer the ownership of the vehicle to another person, make sure that this supplement is provided with the Owner’s Manual inside the vehicle.

The information, specifications and illustrations in this supplement are valid at the time of publication. Fuji Heavy Industries reserves the right to change the specifications and design without prior notice, with no obligation to perform the same or equivalent changes to vehicles sold in the past.

This Owner’s Manual supplement applies to all models, and describes all devices, including manufacturer-installed options.

This means that information may be included about devices that are not installed in your vehicle.

 


MSA5M1716A

https://techinfo.subaru.com/stis/doc/ownerManual/MSA5M1716A_STIS_Index2.pdf

https://static.oemdtc.com/OwnerManual/MSA5M1716A.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [9.97 MB]

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Add an Amp Amplifier Adapter Interface to Factory OEM Car Stereo Radio System for Subaru - Select Vehicles Only - Add Subwoofer Bass Amp - No Factory Premium Amp- Compatible Vehicles Listed Below
  • Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides RCA output and a power wire for the remote amplifier turn on connection. Adjustable gain output. Connection is done at back of radio.
  • VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems- no external factory amp.
  • Compatible vehicles: No factory external amplifier- Made for Subaru: 2019-2022 Ascent;; 2013-2022 BRZ;; 2016-2023 Crosstrek;; 2016-2020 Forester;; 2009-2013 Forester (vehicles with Factory NAV only and with SD card NAV- won't work with DVD based NAV);; 2014-2015 Forester (vehicles with Factory NAV only);; 2012-2014 Subaru Impreza (vehicles with Factory NAV only);; 2015-2023 Impreza;; 2015-2019 Legacy;; 2015-2019 Outback;; 2016-2021 WRX;; 2013-2014 Subaru XV Crosstrek (vehicles with Factory NAV only);; 2015-2016 XV Crosstrek
Bestseller No. 2
Add an Amp Amplifier Adapter Interface to Factory OEM Car Stereo Radio System for Select Infinit Nissan and Subaru Vehicles- Add Subwoofer Bass Amp - Important: See Compatible Vehicles Listed Below
  • Add an amplifier to OEM system- Prevents cutting factory wires- Plugs to back of radio
  • Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides RCA output and a power wire for the remote amplifier turn on connection.
  • Adjustable gain output. Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Note: This adapter hasn't been tested with Bose/premium amplified systems but it might work.
  • Compatible vehicles: Infiniti: 2011-2012 G25, 2008-2013 G37; Nissan: 2010-2019 370Z, 2007-2018 Altima, 2008-2015 Armada, 2009-2014 Cube, 2009-2011 Frontier, 2012 Frontier (S trim/base model only), 2013-2018 Frontier, 2011-2017 Juke, 2018-2019 Kicks, 2012-2019 Leaf, 2007-2019 Maxima, 2009-2019 Murano, 2012-2019 NV, 2013-2018 NV200, 2008-2012 Pathfinder (No S model), 2013-2016 Pathfinder, 2011-2016 Quest, 2008-2018 Rogue/Rogue Select/Rogue Sport, 2007-2018 Sentra,
  • 2008-2012 Titan (S trim/base model only), 2013-2019 Titan, 2016-2019 Titan XD, 2007-2018 Versa, 2014-2019 Versa Note, 2014-2015 Xterra; Subaru: 2009-2015 Forester without OE Nav, 2008-2014 Impreza/WRX without OE Nav, 2010-2011 Legacy without OE Nav, 2010-2011 Outback without OE Nav, 2013-2014 XV Crosstek without OE Nav
Bestseller No. 3
NuIth Car Radio Amp Amplifier Wiring Harness Adapter Compatible with Toyota 1988-2017 Subaru 2012-2019 Vehicle Non JBL System High to Low RCA Converter for Adding Amplifier Subwoofer to Stock Stereo
  • Line Out Converter for Toyota. Camry add an amp amplifier adapter allows to add 2 channel or mono amplifier or subwoofer to existing factory or aftermarket car stereo kit. The function of RCA output can convert high voltage signal output of the amplifier/speaker to low-voltage signal.
  • Tundra add amp adapter converts car stereo speaker wire output to RCA Cable outputs. Fits for Toyota: 2000-2018 Tundra, 1987-2017 Camry, 1987-2018 Corolla, 1988-2017 4 Runner, 1996-2016 RAV 4, 1995-2016 Avalon, 2001-2016 Highlander, 1955-2016 Tacoma, 1998-2016 Sienna, 2001-2018 Prius, 2007-2018 Yaris, 2007-2014 FJ Cruiser, 2007-2018 Yaris, 2009-2015 Venza. ( Please see the image for other Toyota models).
  • Radio add an amplifier for Subaru: 2016-2018 Crosstrek, 2013-2018 BRZ, 2012-2018 Outback, 2016-2017 WRX, Forester with SD card or OE NAV 2009-2013, 2014-2015 Forester with NAV, 2016-2018 Forester, 2012-2014 Impreza with NAV, 2015-2019 Impreza, 2013-2014 Impreza WRX with NAV, 2012-2017 Legacy, 2013-2014 XV Crosstrek with NAV, 2015-2016 XV Crosstrek.
  • The amplifier adapter for Scion factory radio compatible with: 2012-2015 iQ, 2005-2016 tC, 2013-2016 FRS, 2016 iM 2016, 2004-2006 xA , 2004-2015 xB, 2008-2014 xD.
  • Easy to install. Add an amp amplifier adapter for Toyota nearly can be use for any stock stereo with this line out converter. Simply tap into the car audio speaker wires with snap adapters. Note: NOT compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). No factory external amp systems.
Bestseller No. 4
Add an Amplifier Adapter w/Amp Turn On Wire Compatible with Toyota Subaru Scion Lexus
  • Add A Amplifier Plug & Play Harness fits for Forvc Factory Radio.Comes with an inline converter.(See detailed descriptions for specific models and years.)
  • This is an aftermarket part. With strict quality control and testing. Stable performance, high precision, high sensitivity and good reliability.
  • This wire harness provides a line out converter for connection to one set of RCA cables to provide an audio signal to an external amplifier. Also pre-installed on the harness is a remote amplifier turn on wire. This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All that’s left for you to do is connect your own main power wire from your battery and a ground.
  • 1 piece wire harness (show as the picture), Instruction Not Included.
  • Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature. Easy to install. Audio volume to the amplifier can be adjusted by the dials on the harness.
Bestseller No. 5
4 Channel Full System Add an Amp Amplifier Adapter Interface to Factory Car Stereo Radio- Made for Some Nissan and Subaru- Vehicles Listed Below
  • Use this adapter to make your installation of a 4 channel amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides 2 pair stereo RCA output. Adjustable 4 channel gain output. Retains fader and balance. Connection is done at back of radio. Bare speaker wires on this adapter to connect factory speakers to the new amp. Ignition wire connection for amp turn on wire connection.
  • VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no Bose, Infinity, JBL/Synthesis, etc.) Connecting this adapter to the factory wiring will disconnect the vehicle speakers from the radio- required adding amp for speakers to work. Quick disconnect is to connect speaker wires to run to the new amp- only the speaker wires are connected to the factory speakers- all other wires aren't used.
  • Easy to put back to stock. Just remove this adapter and it goes back to stock system. Adapter shrink tubed for durability.
  • Compatible vehicles: No externat factory amp vehicles: Made for Nissan: 2010-2020 370Z, 2007-2020 Altima, 2008-2015 Armada, 2009-2014 Cube, 2009-2011 Frontier, 2012 Frontier (S trim/base model only), 2013-2021 Frontier, 2011-2017 Juke, 2018-2021 Kicks, 2012-2019 Leaf, 2007-2020 Maxima, 2009-2019 Murano, 2012-2021 NV, 2013-2021 NV200, 2008-2012 Pathfinder (No S model), 2013-2020 Pathfinder, 2011-2016 Quest, 2008-2020 Rogue/Rogue Select/Rogue Sport, 2007-2021 Sentra,
  • 2008-2012 Titan (S trim/base model only), 2013-2021 Titan, 2016-2021 Titan XD, 2007-2022 Versa, 2014-2019 Versa Note, 2014-2015 Xterra;; Made for Subaru: 2009-2015 Forester without OE Nav, 2008-2014 Impreza/WRX without OE Nav, 2010-2011 Legacy without OE Nav, 2010-2011 Outback without OE Nav, 2013-2014 XV Crosstek without OE Nav;; Made for Suzuki: Equator 2009-2011- crew cab only
Bestseller No. 6
Factory Radio Amp Amplifier Interface Install Adapter Wiring Wire Harness Cable Compatible with Toyota Compatible with Scion Compatible with Subaru Vehicles - No Factory Premium Amp
  • Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together.
  • Comes with an inline converter. Fully adjustable gain control. Plug and play feature.
  • Compatible with Subaru - BRZ 2013-2018; Crosstrek 2016-2018; Forester with SD card or OE NAV 2009-2013;Forester with NAV 2014-2015; Forester 2016-2018; Impreza with NAV 2012-2014; Impreza 2015-2019; Impreza WRX with NAV 2013-2014; Legacy 2012-2017, Outback 2012-2018; WRX 2016-2017; XV Crosstrek with NAV 2013-2014; XV Crosstrek 2015-2016
  • Compatible with Scion - FRS 2013-2016; iM 2016; iQ 2012-2015; tC 2005-2016; xA 2004-2006; xB 2004-2015; xD 2008-2014
  • Compatible with Toyota- 4Runner 1988-2017; Avalon 1995-2016; Camry 1987-2017; Celica 1986-2006; Corolla 1987-2019; Echo 2000-2006; FJ Cruiser 2007-2014; Highlander 2001-2016; Land Cruiser 1987-2002; Matrix 2005-2013; MR2 1987-1995; MR2 Spyder 2000-2006; Paseo 1992-1997; Previa 1991-1997; Prius 2001-2018; RAV4 1996-2016; Sequoia 2001-2016; Sienna 1998-2016; Solara 2000-2008; Supra 1986-1998; T-100 1993-1998; Tacoma 1995-2016; Tundra 2000-2018; Venza 2009-2015; Yaris 2007-2018
Bestseller No. 7
SYGAV Android 13 Carplay Radio for 2016 2017 2018 Subaru Forester WRX STI with Factory Harman Kardon Amplifier/GPS Navigation HD Touch Screen Car Stereo Head Unit with SIM Card Slot
  • Plug and play; Fit for 2016-2018 wrx, sti, forester, 2015-2016 impreza; support factory hk amplifier system; factory backup camera and usb; android system with qualcomm snapdragon 665 Octa core cpu, 6gb ram, 64gb rom
  • Built-in carplay and android auto; built in a sim card slot; support online map; steering wheel controls and hands-free phone call; hdmi output support car headrest monitor
  • Hd 1280 x 720 touch screen; capacitive 10.2 inch ips screen; 1080p video decoder support 4k video format; support google maps online gps navigation and offline maps
  • Built in dsp; the digital sounds processor with 15 bands eq; built-in amplifier 4 x 50w; 6-channels audio output converters, support subwoofer output
  • Diy settings; rock,pop,jazz,classic,voice,custom; brightness adjustment; dual zone function; screen background picture, boot car logo; support accessories like backup camera, bluetooth obd, dvr camera, tpms
Bestseller No. 8
NuIth Add an AMP Amplifier Adapter Interface for Select 2007-2019 Nissan, 2008-2013 Infiniti G37, 2008-2015 Subaru to OEM Car Radio System 2 Channel RCA Output Converter Non Bose System
  • This amplifier subwoofer wiring adapter used to add amplifier or subwoofer for factory OEM radio system to upgrade the stock audio. The wrx stereo amplifier adapter improve sound system for select Nissan and Subaru vehicles. RCA line output 2-channel converter make your installation of an amplifier to the factory system faster with a cleaner install and also provides a power wire for the remote amplifier turn on connection.
  • The amp amplifier adapter for nissan compatible with OEM system **NOTE** Not compatible in vehicles equipped with a factory amplifier. The forester amplifier adapter only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.).
  • A pathfinder add an amp harness Compatible with Subaru: 2009-2015 Forester (without OE Nav), 2008-2013 Impreza (without OE Nav), 2010-2013 Legacy (without OE Nav), 2010-2013 Outback (without OE Nav), 2008 - 2013 WRX (without OE Nav), 2013-2014 XV Crosstek without OE Nav. 20-pin connector advanced T-Harness for Infiniti: 2011-2012 G25, 2008-2013 G37.
  • A altima add a amp adapter replacement for Nissan: 2009-2013 370Z, 2007-2015 Altima, 2008-2015 Armada, 2009-2014 Cube, 2009-2018 Frontier,2012 Frontier (S trim/base model only), 2011-2017 Juke, 2007-2019 Maxima, 2009-2019 Murano, 2012-2019 NV.2008-2013 Pathfinder (No S model), 2014-2016 Pathfinder, 2008-2020 Rogue Select/Rogue Sport, 2007-2018 Sentra, 2008-2012 Titan (S trim/base model only), 2013-2019 Titan Leaf, 2007-2018 Versa, 2009-2012 X-terra, 2018-2019 Kicks, 2011-2016 Quest.
  • Easy to install. Without cutting any OEM wiring harness required. Amplifier subwoofer adapter is made of pure copper core that keeps excellent conductivity and ensure lifespan.
Bestseller No. 9
Pyle Hydra Marine Amplifier - Upgraded Elite Series 240 Watt 4 Channel Audio Amplifier - Waterproof, 4-8 Ohm Impendance, GAIN Level Controls, RCA Stereo Input & LED Indicator (PLMRA120)
  • PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA120 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units.
  • RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.
  • SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
  • POWERFUL 240 WATT: This amplifier is powerful with its IC Power 120 Watts x 2 Output power supply. Comes with dual adjustable input GAIN level controls between 4 or 8 Ohm speaker impedance.
  • MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
Bestseller No. 10
TERUIPE Add an Amp Amplifier Adapter Interface to Factory Radio System for Toyota Lexus Subaru Scion Selected Models
  • Use this adapter to make your installation of a subwoofer bass amplifier to the factory Head Unit system
  • Plug and play adapter so you don't have to cut or splice into the factory wiring. Replace Part Number: 70-1761.
  • The harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier.Please make sure your car has a radio connector.
  • Compatible with Toyota 4Runne Camry Corolla Tacoma Tundra Yaris etc. for Subaru Impreza Forester Outback Legacy etc. (For more models, please check the product details.)
  • If there is any problem with the product, or if you need help, please contact us by email immediately, and we will reply within 12 hours.

Last update on 2024-03-04 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

1
Share to...