“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10067868
Manufacturer Communication Number: 02-150-14R
Summary
REVISED VALVE TRAIN PARTS TO REDUCE A WARM ENGINE TAPPING SOUND FROM THE LEFT CYLINDER HEAD.
NUMBER: 02-150-14R
DATE: 02/07/14
REVISED: 03/3/14
APPLICABILITY: | 2013-14MY Legacy & Outback Models with 2.5L FB Engine |
---|---|
SUBJECT: | Revised Valve Train Parts to Reduce a Warm Engine Tapping Sound from the Left Cylinder Head |
INTRODUCTION
This bulletin announces the availability of revised valve train components developed to reduce a tapping sound (sometimes described as “a sewing machine type” sound) which may be heard coming from the left-hand (B2) side of the engine when the engine is warm. This bulletin does not address any cold engine or start-up sounds. The changes consist of:
- Design change to the valve rockers
- Camshaft profile change
- 65mm longer intake and 2.4mm longer exhaust valve stem lengths
PART INFORMATION
PART NAME | NEW | OLD | |
---|---|---|---|
INTAKE VALVE | Part Number | 13201AA670 | 13201AA640 |
Change | Stem Length: | Stem Length: | |
104.95mm | 103.3mm | ||
Identification | I31 | I22 | |
EXHAUST VALVE | Part Number | 13202AA750 | 13202AA670 |
Change | Stem Length: | Stem Length: | |
96.5mm | 94.1mm | ||
Identification | E3 | E2 | |
VALVE ROCKER | Part Number | 13249AA250 | 13249AA240 |
Change | Change to Roller Portion | n/a | |
Identification | Circular groove added on pivot side | n/a | |
INTAKE CAMSHAFT, LEFT | Part Number | 13037AA960 | 13037AA850 |
Change | Cam Profile Change | n/a | |
Identification | 38B360 or 38B410 | 38B250 or 38B300 | |
EXHAUST CAMSHAFT , LEFT | Part Number | 13052AA960 | 13052AA850 |
Change | Cam Profile Change | n/a | |
Identification | 53B360 or 53B410 | 53B250 or 53B300 | |
PIVOT, ROCKER ARM | Part Number | 13296AA090 | 13296AA051 |
NOTE: These revised rocker pivots were incorporated into production October 8, 2012, starting with VIN: |
The illustrations below show additional information about the changes to the valve rockers, camshafts and valves to help readily distinguish them from the previous version parts.
SERVICE PROCEDURE / INFORMATION
If you receive a customer concern of a tapping sound from the B2 cylinder head, confirm it is isolated to the B2 valve train area before proceeding with any repairs. Once verified, order and replace the intake and exhaust camshafts, the 4 intake and 4 exhaust valves, and all 8 rockers. Depending upon the VIN (see part information table) you may also need to replace all 8 rocker pivots. To clarify, if the VIN is BEFORE VIN D*017921 for Legacy or D*242757 for Outback, you will need to replace the rocker pivots. Vehicles built after these VINs already incorporate the new pivots. Refer to the service procedures outlined in the applicable Service Manual for installation.
NOTE: When setting the valve clearances, the intakes should be set to 0.13mm +0.02 / – 0.03 and the exhausts set to 0.22mm +/- 0.02. These are revised clearance specifications and are not reflected in the Service Manual.
IMPORTANT: Do not mix old and new parts together as it will become impossible to obtain intake valve clearances that are within specification.
TIP: An egg carton makes a perfect organizer tray. Make sure to mark it as necessary (front, intake, exhaust) to eliminate any mixing of parts.
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
SUBARU | LEGACY | 2013-2014 |
SUBARU | OUTBACK | 2013-2014 |
1 Associated Document
Service Bulletin Document
NUMBER: 02-150-14R
DATE: 02/07/14
REVISED: 03/3/14
https://www.nhtsa.gov/recalls?nhtsaId=10067868
SB-10067868-0699.pdf 423.768KB
NHTSA ID Number: 10232889
Manufacturer Communication Number: 0215014R
Summary
Revised Valve Train Parts to Reduce a Warm Engine Tapping Sound from the Left Cylinder Head
1 Associated Document
Manufacturer Communications
NUMBER: 02-150-14R
DATE: 02/07/14
REVISED: 03/3/14
https://www.nhtsa.gov/recalls?nhtsaId=10232889
MC-10232889-9999.pdf 423.768KB
- Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Provides better fuel economy (based on the latest industry standards)
- Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- Superior wear protection on critical engine parts
- 6X better wear protection than industry standards, as measured in the latest Sequence IVA test
- Superior sludge cleaning and protection against new formation
- 1.3X better sludge protection than industry standards, as measured in Sequence VH sludge test vs. API SP limits
- Full synthetic formula provides thermal and oxidation stability
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
- 3X stronger against viscosity breakdown than leading full synthetic, based on Kurt Orbahn test in 5W-30 grade
- 10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
- 6X better wear protection, Protection for 10,000 miles between oil changes
- 1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
- Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection
- Full synthetic 0W-20 engine oil designed for vehicles with over 70,000 miles that offers the same protection as SAE 5W-20 and is made with natural gas
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
- Formulated to deliver less oil burn off than high mileage motor oils made from crude oil
- Mobil Full Synthetic High Mileage 0W-20 motor oil is designed for vehicles with over 75,000 miles, upgrading from a conventional or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent oil leaks, sludge, and deposit formation to help reduce engine wear with a balanced additive system formulation and extra seal conditioner
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- Full synthetic 0W-20 engine oil with PurePlus Technology that is race-trusted for unbeatable engine protection*
- Pennzoil Ultra Platinum helps extend engine life and protects for up to 20 years or 750,000 miles, whichever comes first** (see warranty information in Product Description)
- No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
- Far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6)
- Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, dexos 1 Gen 2
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: 02-150-14R; Date: 03/03/14 Page 1 INTRODUCTION This bulletin announces the availability of revised valve train components developed to reduce a tapping sound (sometimes described as “a sewing machine type” sound) which may be heard coming from the left-hand (B2) side of the engine when the engine is warm. This bulletin does not address any cold engine or start-up sounds. The changes consist of: • Design change to the valve rockers • Camshaft profile change • 1.65mm longer intake and 2.4mm longer exhaust valve stem lengths PART INFORMATION PART NAME NEW OLD INTAKE VALVE Part Number 13201AA670 13201AA640 Change Stem Length: Stem Length: 104.95mm 103.3mm Identification I31 I22 EXHAUST VALVE Part Number 13202AA750 13202AA670 Change Stem Length: Stem Length: 96.5mm 94.1mm Identification E3 E2 VALVE ROCKER Part Number 13249AA250 13249AA240 Change Change to Roller Portion n/a Identification Circular groove added on pivot side n/a INTAKE CAMSHAFT, LEFT Part Number 13037AA960 13037AA850 Change Cam Profile Change n/a Identification 38B360 or 38B410 38B250 or 38B300 NUMBER: 02-150-14R DATE: 02/07/14 REVISED: 03/3/14 APPLICABILITY: 2013-14MY Legacy & Outback Models with 2.5L FB Engine SUBJECT: Revised Valve Train Parts to Reduce a Warm Engine Tapping Sound from the Left Cylinder Head SERVICE BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS “ISO 14001 COMPLIANT” The international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Bulletin Number: 02-150-14R; Date: 03/03/14 Page 2 PART NAME NEW OLD EXHAUST CAMSHAFT , LEFT Part Number 13052AA960 13052AA850 Change Cam Profile Change n/a Identification 53B360 or 53B410 53B250 or 53B300 PIVOT, ROCKER ARM Part Number 13296AA090 13296AA051 NOTE: These revised rocker pivots were incorporated into production October 8, 2012, starting with VIN: Legacy: D*017921 Outback: D*242757 The illustrations below show additional information about the changes to the valve rockers, camshafts and valves to help readily distinguish them from the previous version parts. SERVICE PROCEDURE / INFORMATION If you receive a customer concern of a tapping sound from the B2 cylinder head, confirm it is isolated to the B2 valve train area before proceeding with any repairs. Once verified, order and replace the intake and exhaust camshafts, the 4 intake and 4 exhaust valves, and all 8 rockers. Depending upon the VIN (see part information table) you may also need to replace all 8 rocker pivots. To clarify, if the VIN is BEFORE VIN D*017921 for Legacy or D*242757 for Outback, you will need to replace the rocker pivots. Vehicles built after these VINs already incorporate the new pivots. Refer to the service procedures outlined in the applicable Service Manual for installation. NOTE: When setting the valve clearances, the intakes should be set to 0.13mm +0.02 / – 0.03 and the exhausts set to 0.22mm +/- 0.02. These are revised clearance specifications and are not reflected in the Service Manual. IMPORTANT: Do not mix old and new parts together as it will become impossible to obtain intake valve clearances that are within specification. TIP: An egg carton makes a perfect organizer tray. Make sure to mark it as necessary (front, intake, exhaust) to eliminate any mixing of parts. Identification Markings Addition of groove Continued… Bulletin Number: 02-150-14R; Date: 03/03/14 Page 3 WARRANTY / CLAIM INFORMATION For vehicles within the Basic New Car Limited and/or Powertrain Warranty, this repair may be claimed using the following information: LABOR DESCRIPTION LABOR OPERATION # FAIL CODE TRANSMISSION LABOR TIME H4 ENGINE R&R FOR CYLINDER HEAD SERVICING B293-130 AER-48 M/T 3.4 CVT 3.9 LH CYLINDER HEAD R&R C293-132 All 4.9 ALL VALVES REPLACE, ONE CYLINDER HEAD Includes: Valve Seating, R&R of the Springs, Valve Seals & Valve Adjustment C293-123 1.6 VALVE TRAIN NOISE DIAGNOSIS C243-001 0.3
SEOCONTENT-END