NHTSA ID Number: 10171106 Manufacturer Communication Number: 12-280-20 Summary This bulletin provides a procedure to address a limited number of customer concerns regarding a visible gap between the A-Pillar trim panel and the head liner.   NUMBER: 12-280-20 DATE: 01/31/20 APPLICABILITY: 2020MY Legacy and Outback SUBJECT: A-Pillar Trim- Gap Visible at Head Liner   INTRODUCTION: This bulletin ... Read more

The post A-Pillar Trim- Gap Visible at Head Liner – 2020 Subaru Legacy & Outback first appeard on Subaru - OEMDTC and is written by oemdtc

NHTSA ID Number: 10150932 Manufacturer Communication Number: 12-251-18 Summary This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to ... Read more

The post Gap Between Top of Glove Box and Instrument Panel – 2012-2017 Subaru first appeard on Subaru - OEMDTC and is written by oemdtc

NUMBER: 12-198-16 DATE: 03/21/16 APPLICABILITY: 2015-16MY Outback SUBJECT: Roof Rail Gapping   INTRODUCTION This bulletin announces a design change to the roof rail assembly to address customer concerns of gapping between the rail’s sealing portions and the vehicle roof panel as shown in the photo below.     Production Change Information: The new roof rails ... Read more

The post Roof Rail Gapping – 2015-2016 Subaru Outback first appeard on Subaru - OEMDTC and is written by oemdtc

NUMBER: 12-194-15 DATE: 11/11/15 APPLICABILITY: 2012-15MY Impreza 2.0L Models 2013-15MY XV Crosstrek Models SUBJECT: Eliminating Gap between Headlamp and Bumper Cover   INTRODUCTION This bulletin announces a design change to the front bumper corner mounting bracket to address concerns of a gap between the top edge of the cover and the headlamp assembly as shown ... Read more

The post Eliminating Gap between Headlamp and Bumper Cover – 2012-2015 Subaru first appeard on Subaru - OEMDTC and is written by oemdtc