NHTSA ID Number: 10232888
Manufacturer Communication Number: 1216614
Summary
Revised L/Front Dash Speaker Grille
NUMBER: 12-166-14
DATE: 03/03/14
| APPLICABILITY: | 2010-2014MY Legacy and Outback Models |
| SUBJECT: | Revised L/Front Dash Speaker Grille |
INTRODUCTION
A design change has been made to the retaining hook and reinforcement rib portions of the left front dash speaker grille to increase retention and maintain proper fit to the dashboard trim.
COUNTERMEASURE IN PRODUCTION
The new speaker grille was incorporated into production during October, 2013 starting with the following VINs: Legacy- E*015842 and Outback- E*240453.
PART INFORMATION
| PART NAME | NEW PART NUMBER |
| GRILLE-SPEAKER, SIDE | 66119AJ06A |
SERVICE PROCEDURE / INFORMATION
Use a plastic trim tool to CAREFULLY remove the old speaker grille from the dash as shown below. Install the new grille by inserting the 2 front claws into their holes in the dash structure closest to the windshield first. After the rear hook and the retaining clip are secure, confirm proper retention and fit.
10 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 12-166-14
DATE: 03/03/14
https://www.nhtsa.gov/recalls?nhtsaId=10232888
MC-10232888-9999.pdf 829.185KB
NHTSA ID Number: 10068297
Manufacturer Communication Number: 12-166-14
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1 Associated Document
Service Bulletin Document
NUMBER: 12-166-14
DATE: 03/03/14
https://www.nhtsa.gov/recalls?nhtsaId=10068297
SB-10068297-0699.pdf 829.185KB
- Power Handling - Delivering 200W (25W nominal) with 4-ohm impedance, these car door speakers combine style and high-quality sound for a dynamic audio experience
- 2-Way Coaxial Design - The innovative coaxial setup of these 6.5" car speakers integrates a woofer and tweeter for balanced, immersive sound, ensuring a full range of frequencies during your drive
- Sensitivity - With an 88dB sensitivity rating, enjoy distortion-free music at higher volumes, ensuring a clear and loud audio experience with lower power inputs
- 6.5" Standard Sizing - Designed with a standard 6.5-inch diameter, these vehicle speakers seamlessly integrate into most car interiors, offering versatility without compromising performance
- Traditional Black - The sleek black finish enhances aesthetics and complements any vehicle interior, combining style seamlessly with high-quality sound
- PACKAGE OF 3 ITEMS - Kicker 46CSC654 6 ½ inch speakers (pair), Vixen Go VGH-72-8104 speaker harness (pair), and Vixen Go VGB6707 speaker adapters for Subaru WRX/WRX STI 2016-2021 (pair). FREE Vixen Go Can Cooler
- SPEAKER FEATURES - CS Series 2-way coaxial speakers deliver a full range sound experience with an ultra-clean bass by hitting all frequencies with high sensitivity, producing a sound output of 300 watts MAX
- GREAT FIT FOR YOUR SUBARU - Perfectly matched by our car audio experts, this speaker package was created for Subaru WRX/WRX STI 2016-2021 to save you research time when upgrading your standard factory speakers
- BEST VALUE FOR YOUR MONEY - This all-in-one Kicker bundle is better together
- SUPER EASY TO INSTALL - The included adapters and harnesses make it a simple and quick plug-and-play installation, with no cutting needed
- Dimensions: 6.6 x 6.6 x 2.4 inches
- Impedance: 4 ohms
- Mounting Depth: 2.1 inches, Mounting Hole: 5.5 inches
- Item Weight: 1.3 Lbs. (pair)
- Frequency Response: 100 Hz to 18 KHz
- Feature: The installation depth of the front door speaker spacer rings are 32 mm, which compatible with the 6.5 inch (165 mm) allows you to replace factory speakers with aftermarket speakers; Can effectively stop the resonance of the speaker installation position, so that the speaker's mid-range frequency is more clear, low-frequency dive lower
- Compatibility: 6-1/2 inches front door speaker adapter kit replacement for Subaru 2008-2018 Forester, 2014-2020 Impreza, 2003-2020 Outback, 2008-2019 WRX/STI, 2011-2017 Crosstrek, 2003-2014 Legacy, 2016 Levorg; OEM reference: Front Door Speaker 86301FG002; Please make sure this part fits your vehicle before ordering
- Professional material designed: RED WOLF speaker adapter bracket is adopted ABS plastic with durable construction solid and well made; Will not rot like MDF or wood speaker mounts
- Straightforward installation: There's no special installation tools are required when install 6.5 inch front door speaker spacer rings; Using the existing vehicle mounting points; Required no cutting and drilling
- Package Contents: 1 pair 6.5 inch front door speaker spacer ring; NOTE: Please allow 1-2mm error due to manual measurement
SEOCONTENT-START
Bulletin Number: 12-166-14; Date: 03/03/14 Page 1 INTRODUCTION A design change has been made to the retaining hook and reinforcement rib portions of the left front dash speaker grille to increase retention and maintain proper fit to the dashboard trim. COUNTERMEASURE IN PRODUCTION The new speaker grille was incorporated into production during October, 2013 starting with the following VINs: Legacy- E*015842 and Outback- E*240453. PART INFORMATION PART NAME NEW PART NUMBER GRILLE-SPEAKER, SIDE 66119AJ06A NUMBER: 12-166-14 DATE: 03/03/14 APPLICABILITY: 2010-2014MY Legacy and Outback Models SUBJECT: Revised L/Front Dash Speaker Grille SERVICE BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS “ISO 14001 COMPLIANT” The international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Increased rear hook thickness Rib cut-down (1mm) Claws Retaining Clip Additional Rib Bulletin Number: 12-166-14; Date: 03/03/14 Page 2 SERVICE PROCEDURE / INFORMATION Use a plastic trim tool to CAREFULLY remove the old speaker grille from the dash as shown below. Install the new grille by inserting the 2 front claws into their holes in the dash structure closest to the windshield first. After the rear hook and the retaining clip are secure, confirm proper retention and fit. WARRANTY / CLAIM INFORMATION For vehicles within the Basic New Car Limited Warranty period, this repair may be claimed using the following information: LABOR DESCRIPTION LABOR OPERATION # FAIL CODE LABOR TIME ONE DASH SPEAKER GRILLE R&R A911-471 YMS-48 0.2 Continued…
SEOCONTENT-END
This product presentation was made with AAWP plugin.