WRE-20 Ignition Coil Campaign – 2020 Subaru Outback

NHTSA ID Number: 10182244

Manufacturer Communication Number: WRE-20

Summary

Subaru of America, Inc. (Subaru) is initiating a new voluntary emission recall for certain 2020 model year 2.5L Outback vehicles in which an incorrect ignition coil(s) may have been installed.

 


NUMBER: WRE-20
DATE: 10/27/2020

APPLICABILITY: 2020MY Outback 2.5L NA Models
SUBJECT:WRE-20 Ignition Coil Campaign

 

INTRODUCTION:

Subaru of America, Inc. (Subaru) is initiating a new voluntary emission recall for certain 2020 model year 2.5L Outback vehicles in which an incorrect ignition coil(s) may have been installed.

 

AFFECTED VEHICLES:

A total of 203 U.S. vehicles will be affected by this voluntary emissions recall:

Model Year:Carline:Production Dates:
2020Outback 2.5L3/11/2020-3/13/2020

 

Not all vehicles in the production date range listed above may be affected by this voluntary emissions recall. Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com.  This information is now available.

 

REASON FOR THIS VOLUNTARY EMISSIONS RECALL:

One or more incorrect ignition coils may have been installed in the affected vehicles during production.  As a result, over time, a misfire might occur if the incorrect ignition coil continues being used. If a misfire occurs, the Check Engine Light may illuminate, and certain Diagnostic Trouble Codes (DTCs) may be set and stored.

 

REMEDY REPAIR:

Retailers will inspect all four ignition coils in the affected vehicles, and check for DTCs. If an incorrect ignition coil exists in an affected vehicle, it will be replaced. If a misfire DTC is stored, the front exhaust pipe (which includes the catalytic converter) and the affected spark plug(s) will also be replaced. This voluntary emissions recall will be performed at no cost to the vehicle owner.

 

RETAILER RESPONSIBILITY:

Any vehicles listed in any recall/campaign that are in retailer stock must be:

  • Immediately identified
  • Tagged or otherwise marked to prevent their delivery or use prior to repair
  • Repaired in accordance with the repair procedures outlined in this Product Campaign Bulletin

Retailers are to promptly perform the applicable service procedures, to correct all affected vehicles in their inventory (new, used, demo & SSLP). Additionally, whenever a vehicle subject to this voluntary emissions recall is taken into inventory or in for service, necessary steps should be taken to ensure the repair has been made before selling or releasing the vehicle.

 

OWNER NOTIFICATION:

Owner notification letters will be sent by first class mail on or around October 30, 2020.

 

SERVICE PROCEDURE / INFORMATION:

 

REMINDER:  Customer satisfaction and retention starts with performing quality repairs.

 

OVERVIEW:  The Service Procedure for this Campaign involves inspection for any stored misfire DTC(s), removal and inspection of all 4 ignition coil assemblies and the replacement of any coils which are identified as incorrect for the application.  In some cases, replacement of the front catalytic converter / exhaust pipe may be required.  A Flowchart is provided below for additional reference.

 

STEP 1) Check if any DTCs are stored in the ECM memory. If any of the following DTCs are stored as current or past failure, record them.

[P0301: CYLINDER 1 MISFIRE DETECTED]
[P0302: CYLINDER 2 MISFIRE DETECTED]
[P0303: CYLINDER 3 MISFIRE DETECTED]
[P0304: CYLINDER 4 MISFIRE DETECTED]

If any DTCs other than those above are stored, diagnose following the procedures in the applicable Service Manual.

 

STEP 2) Remove ALL 4 ignition coils and check the color of their protectors.

 

CRITICAL: ALL 4 ignition coils MUST be removed and inspected closely.  Since it may be difficult to identify the protector color under the normal lighting, using an additional light source or strong flashlight is recommended.

CORRECT Ignition Coil (22433AA81A for 2.5L NA Engine)Wrong Ignition Coil                        

(22433AA82A for 2.4L Turbo Engine)

 

STEP 3) Is the color of all 4 ignition coil protectors Gray?

Reinstall all the ignition coils to complete the procedure.

Proceed to STEP 4.

 

STEP 4) Does the cylinder number shown by DTC recorded in STEP 1 match the cylinder which the                  wrong ignition coil (Black) was found to be installed?

 

VERY IMPORTANT PARTS ORDERING INFORMATION: Replacement ignition coil (p.n. 22433AA81A) orders should be placed Non-Prime.  The VIN (last 8) of the recalled vehicle will be the P.O. number and 4 new ignition coils will be released by SOA PICs.  Replace any Black coils found during the inspection ONLY.  Use any remaining coils to close recalls on other vehicles as needed.

Replace the wrong (Black) ignition coil(s) with correct (Gray) coil(s)*.

 

*NOTE: In this case, the misfire DTC(s) may have been stored due to another reason. Diagnose any stored DTC(s) following the procedure in the applicable Service Manual.

 

STEP 5) VERY IMPORTANT:  ALWAYS road test the vehicle.  If any concerns are noted during the road test, proceed to and complete the Inspection Mode A and B procedures as per the applicable Service Manual to determine if misfire codes may be present.  Correct any conditions found as necessary prior to releasing the vehicle.

 

CALIFORNIA “VEHICLE EMISSION RECALL – PROOF OF CORRECTION” CERTIFICATE

The California Air Resources Board and the Department of Motor Vehicles Registration/Recall Program requires that all emission related Recall/Campaign or Service Program repairs be completed before a vehicle registration is renewed. Please provide owners of vehicles registered in the state of California a completed “Vehicle Emission Recall – Proof of Correction” certificate. Vehicle owners should be advised to retain this certificate because the California Department of Motor Vehicles may require they provide proof this service program repair has been completed.

 

SERVICE PROGRAM IDENTIFICATION LABEL:

 


Subaru Service Program WRE-20

Voluntary Emissions Recall October 2020

 

Dear Subaru Owner:

We would like to thank you for your selection of a Subaru vehicle.  We take pride in our products and are committed to your continued satisfaction.

 

Subaru has become aware that certain 2020 model year Outback 2.5L models may have had an incorrect ignition coil(s) installed during production.  You have received this notice because our records indicate that you currently own one of these vehicles.

 

REASON FOR THIS VOLUNTARY EMISSIONS RECALL

One or more incorrect ignition coils may have been installed in your vehicle during production.  As a result, over time, a misfire might occur if the incorrect ignition coil continues being used. If a misfire occurs, the Check Engine Light may illuminate, and certain Diagnostic Trouble Codes (DTCs) may be set and stored.

 

REPAIR

Your Subaru retailer (dealer) will inspect all four ignition coils in your vehicle, and check for DTCs. If an incorrect ignition coil exists in your vehicle, it will be replaced. If a misfire DTC is stored, the front exhaust pipe (which includes the catalytic converter) and the affected spark plug(s) will be replaced. This repair will be performed at no cost to you.

 

WHAT YOU SHOULD DO

You should immediately contact your Subaru retailer (dealer) for an appointment to have this inspection and any necessary repair performed.

 

HOW LONG WILL THE REPAIR TAKE?

The time to perform the ignition coil inspection and DTC check is approximately 1 hour and 10 minutes. If a misfire DTC code is stored, the front exhaust pipe and spark plug replacement may increase the repair time to approximately 3 hours and 20 minutes.  Your retailer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time.

 

CALIFORNIA REGISTERED OWNERS

The California Air Resources Board requires that emission-related campaigns be completed prior to California’s vehicle registration renewal process; without this repair, you will not be able to register your vehicle during your next annual registration. Upon completion of this campaign, your California dealer will complete and provide you a “Proof of Correction Certificate.” If required, present the certificate to the California Department of Motor Vehicles (the “DMV”) when renewing your California registration as proof of campaign completion. If the DMV does not request the certificate, we recommend that you keep it for your records.

 

In addition, the State of California requires that every vehicle must pass an emission test (SMOG Check) every two years and before it is sold. Without the service we are providing at no charge, your vehicle may not pass this test.

 

CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?

If you have moved or sold your vehicle, please update this information online at www.subaru.com, select ‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the ‘Quick Links’ menu.

 

IF YOU NEED FURTHER ASSISTANCE:

To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’

If you need additional assistance, please contact us directly:

  • By e-mail: Go to www.subaru.com, Customer Support and select ‘Contact Us’
  • By telephone: 1-844-373-6614

Monday through Friday between 8:00 a.m. and 7:00 p.m. ET

  • By U.S. Postal mail: Write us at Subaru of America, Inc.,

Attn: Customer Advocacy Department,

P.O. Box 9103, Camden, NJ  08101-9877

Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.

Your continued satisfaction with your Subaru is important to us.  Please understand that we have taken this action in the interest of your vehicle’s proper operation.  We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible to have this repair performed.

Sincerely,

Subaru of America, Inc.

 

A subsidiary of SUBARU CORPORATION

 


1 Affected Product

Vehicle

MAKEMODELYEAR
SUBARUOUTBACK2020

 


1 Associated Document

Manufacturer Communications

NUMBER: WRE-20
DATE: 10/27/2020

MC-10182244-0001.pdf 756.079KB

 


NHTSA ID Number: 10182243

Manufacturer Communication Number: Subarunet Announ

Summary

Subaru of America, Inc. (Subaru) is initiating a new voluntary emission recall for certain 2020 model year 2.5L Outback vehicles in which an incorrect ignition coil(s) may have been installed.

 

1 Associated Document

Manufacturer Communications

MC-10182243-0001.pdf 183.22KB

 


 

SaleBestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
SaleBestseller No. 2
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
312 Reviews
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCMeBay logo systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
Bestseller No. 3
BlueDriver OBD2 Scanner Bluetooth, No Subscription, ABS SRS TPMS
62,378 Reviews
BlueDriver OBD2 Scanner Bluetooth, No Subscription, ABS SRS TPMS
  • [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
  • [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
  • [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
  • [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
  • [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
Bestseller No. 4
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) – Except 2001 330i
  • ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
  • ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
  • ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
  • ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
  • ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
Bestseller No. 5
Innova SD35 OBD2 Scanner – ABS, SRS, TPMS & Check Engine Code Reader, Live Data, All System Diagnostics, Compatible with Most Vehicles
  • OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
  • ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
  • OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
  • ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
  • WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...