NHTSA ID Number: 10189608
Manufacturer Communication Number: 12-317-21
Summary
This bulletin announces a change to the mat located in the inside tray of the center console box lid to address concerns of shrinking and deformation.
NUMBER: 12-317-21
DATE: 03/29/21
| APPLICABILITY: | 2020-21MY Legacy and Outback |
| SUBJECT: | Console Lid Inner Tray Mat- Design Change |
INTRODUCTION:
This bulletin announces a change to the mat located in the inside tray of the center console box lid to address concerns of shrinking and deformation. The new mat is made with a revised production process and incorporates an enhanced texture to prevent the condition shown in the photo below.
PRODUCTION CHANGE INFORMATION:
This bulletin will be revised with the starting VIN information for the change when it becomes available.
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
The new MAT part number is 92177AN021.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for replacing the console box lid mat remain unchanged. Always refer to STIS and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time.
NOTE: The console box lid assembly does NOT have to be replaced to address a condition with the mat as the mat component is serviced separately.
4 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 12-317-21
DATE: 03/29/21
MC-10189608-0001.pdf 1049.48KB
- Center armrest Cover
- Genuine Subaru
Part Number J201SAR300 Replaces (J201SAN600 &J201SAN601) - Protects the center console lid surface from nail scratches and puncture holes, while providing a comfortable armrest for front seat passengers.
- Manufactured with a rugged polyester exterior and multi-layered padded interior, the Console Lid Protector easily installs by slipping over the console lid and securing with two integrated durable elastic straps
- Crosstrek 2023-2026
- Center armrest Cover J201SSJ001 (Replaces J201SSJ000 )
- Protects the center console lid surface from nail scratches and puncture holes, while providing a comfortable armrest for front seat passengers.
- Manufactured with a rugged polyester exterior and multi-layered padded interior, the Console Lid Protector easily installs by slipping over the console lid and securing with two integrated durable elastic straps
- 2019-2024 Forester
- 2025 Forester Wilderness
- 【 CUSTOM FIT】This center console armrest cover fits for 2018 2019 2020 2021 2022 2023 Subaru
Crosstrek and 2017 2018 2019 2020 2021 2022 2023 Subaru
Impreza. Please put in the specific model and year of your car above the pictures to make sure your car and the armrest box cover are a good match - 【EXCELLENT MATERIAL】This Crosstrek/Impreza armrest cover is made of premium quality environmentally friendly PU leather, without peculiar smell, durable, soft, scratch-resistant, wear-resistant, stain-resistant, waterproof, easy to clean and wipe
- 【FULL PROTECTION】Console box lid cover provides full protection for the console lid. No scratches and marks left caused by your pets' claws, sharp objects, dirty liquids, abrasion, dust, etc. Keep your car interior always in brand new condition. In the meantime, this armrest cover perfectly covers the old center console, makes it just like new
- 【ENHANCE YOUR COMFORT】This center console cover is designed according to the curvature of Crosstrek's armrest box, so it is flat and no wrinkles, looks like the original. The soft PU leather cushion can relax your elbow and offers your pet a comfy seat and better grip on the turns
- 【UPGRADE APPEARANCE】Stitching that exactly matches the color of the car's interior and upgraded texture, enrich the style and appearance of your car, and make your car more refined and personalized
- 【Customized Size for Subaru
Outback】 Custom made for 2020 2021 2022 2023 2024 2025 2026 Subaru
Outback Wilderness/Base/Premium/Onyx Edition/Limited/Touring/Limited XT/Limited XT/Only Edition XT, the console cover fits perfectly and snugly with no wrinkles, almost looks OEM part of the vehicle. Our Outback armrest protector is a great accessory to protect the armrest from normal tear and wear and does not affect the use of the armrest box. - 【2025 Thickened Sponge Design】 Shademax Subaru
Outback center console cover has a thicker sponge than normal armrest pads, which can reduce elbow pressure to a greater extent and relieve fatigue during driving. The Subaru
Outback armrest cushion with softer design relieve stress off your elbow while driving and keeps your elbow away from bumps, enhances your armrest comfort. - 【Great Protection for Console】 A must-have console cushion for Outback armrest. The Subaru
Outback center console cover gives full protection to your car armrest box from spills, scuffs, dirt, pet claws and sticky fingers. This Subaru
Outback console cover can protect the tops and sides of the console and hide the ugly tear in the leather. - 【PU Leather Material】 The 2025 Outback center console cover pad is made of waterproof, durable and lightweight PU Leather. Shademax armrest seat box cover is wear-resistance, dust-proof and easy to clean. Make your Outback interior console look luxury.
- 【Easy Installation】 The Subaru
Outback middle console cover is designed with 3 flexible non-slip backing elastic straps to keep the cushion stably stay in place. No tools are required, the Subaru
Outback seat center box lid pad protector is easy to cover on your armrest box. Does not interfere with arm rest opening or closing. Give your console lid a great protection.
SEOCONTENT-START
Bulletin Number: 12-317-21; Date: 03/29/21 Page 1 of 2 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru
Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru
of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 12-317-21 DATE: 03/29/21 APPLICABILITY: 2020-21MY Legacy and Outback SUBJECT: Console Lid Inner Tray Mat- Design Change INTRODUCTION: This bulletin announces a change to the mat located in the inside tray of the center console box lid to address concerns of shrinking and deformation. The new mat is made with a revised production process and incorporates an enhanced texture to prevent the condition shown in the photo below. PRODUCTION CHANGE INFORMATION: This bulletin will be revised with the starting VIN information for the change when it becomes available. PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. The new MAT part number is 92177AN021. ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. © 2021 Subaru
of America, Inc. All rights reserved. Bulletin Number: 12-317-21; Date: 03/29/21 Page 2 of 2 SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for replacing the console box lid mat remain unchanged. Always refer to STIS and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. NOTE: The console box lid assembly does NOT have to be replaced to address a condition with the mat as the mat component is serviced separately. WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period, this repair may be submitted using the following claim information: Labor Description Labor Operation # Labor Time Fail Code CONSOLE LID TRAY MAT A911-363 0.2 YPO-29 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





