Accessory Installation Guide
Part Number 0910542040
Applicable Car Models SOLTERRA
Components
| No. | Product name | Quantity | Service part number |
| (1) | Jack | 1 | 0911142070 |
| (2) | Jack handle | 1 | 0911342030 |
| (3) | Wrench | 1 | 0915142010 |
| (4) | Jack carrier | 1 | 5879042050 |
| (5) | Hub bolt s ocket | 1 | 0915A53010 |
| (6) | Wheel guide pin | 1 | 0915B53010 |
| (7) | Nut (M6) | 4 | 9017906216 |
Installation precautions
The following symbols are us ed in this installation instruction sheet to ensure safe operation.
Caution: Indicates information that, if not heeded, could lead to accidents , injury, damage to the vehicle, etc.
Advice : Indicates information to be kept in mind when working quickly.
1. Park the vehicle on a level surface , pull on the parking brake, and ensure that the wheels are securely fastened.
2. When removing vehicle parts , handle with care to prevent damage to the vehicle and the removed
parts .
3. Do not remove vehicle parts other than those indicated in this installation instruction sheet.
Tools required for installation
- General tools and torque wrenches
Installation procedure
Jack cover removal
1. Open the deck board.
2. Grasp the jack cover knob (protruding part), release the eight claws (indicated by the dotted squares), and remove the jack cover.
Jack installation
1. Set the jack bracket on the stud bolts (indicated by the dotted circles).
2. Tighten the jack bracket with M6 nuts (four tightening points ).*
* The tightening torque for the nut is 10.0 N·m.
3. Set the jack head end on the temporary placement (1) position, open the jack, and hook the jack on the temporary placement (2) position.
* The procedure for the temporary placement (1) and (2) positions are reversible.
4. Attach the jack to the jack bracket.
*Secure the jack and jack bracket so that they will engage.
Jack handle and wrench installation
1. Install the jack handle, wrench, hub bolt socket, and wheel guide pin on the tool tray in the positions shown in the figure on the left-hand side.
Restoration
Install the removed vehicle parts as they were before.
Caution
Be careful not to allow the parts to pinch the vehicle harness, interfere with sharp edges, or damage other vehicle parts during restoration.
0910542040
- 【Car Jack Capacity】Maximum lifting weight 2 Ton (4409 lbs),This Jack for Car Lifting Range from 4.33" (11cm) to 15.75"(40cm). The scissor lift jack provides a wider range to reach under low chassis sedans or elevate high-body SUVs effortlessly.
- 【Complete Tire Replacement Kit】1x 2T Scissor jack; 1x Ratchet Wrench; 1x Lug Wrench(17/19mm 21/23mm); 1x Gloves; 1x Pencil Tire Pressure Gauge; 1x Storage Bag.he all-inclusive kit fits perfectly in your trunk or garage, ready to tackle any emergency tire replacement job.
- 【Stable and Secure】The car jack kit is made from high-quality materials and is designed to withstand heavy use. Its corrosion-resistant construction guarantees durability and longevity, making it suitable for any weather conditions.
- 【Easy to Use】The scissor jack has a simple and easy-to-operate design, while the lug wrench and tire changing kit are designed to provide a comfortable grip and maximum leverage.For any emergency, this Car Jack Kit will help you change your tire fast and easy.
- 【Universal Car Emergency Kit】This car jack kit is universally compatible with cars, SUVs and other vehicles. It is perfect for emergency situations where you need to change a flat tire, remove a stuck wheel, or perform other vehicle repairs.
- SPEEDY LIFT GARAGE JACK - This Hydraulic Trolley Jack features a 2 ton (4,000 lb) capacity with a min lifting height of 5.1" and a max height of 13". Allows you to easily lift the jack up to desired height, Great for garage service and heavy-duty industrial use. Suitable for vehicles up to 2TON/4000 lbs. Providing you with the essentials to lift and support most cars, Not recommendable for Pick-Up, truck, too big SUVs etc.
- OVERLOAD PROTECTION & EASY JACK POSITIONING - Built-in dependable safety release valve triggers in the event of an overload to prevent damage or injury. The large saddle provides extra stability and helps protect your vehicle.
- LIGHTWEIGHT DESIGN & HEAVY DUTY PERFORMANCE - Heavy duty steel construction provides rigidity and stability. Designed with swivel casters, rolling without a hitch for letting you maneuver with ease and easy positioning.
- NOTE - The Jack is designed for lifting purposes only. lt must not be used as a jack stand to hold load for any prolonged period. It only suitable for vertiçallifting jobs and can not be used where side or downward force is required. The jack is only for lifting; for support, a jack stand must be used.
- HIGH-QUALITY DNA TOOLS - Each item in our collection is the result of significant research and development, as well as rigorous automotive application testing and fitments carried out by our highly qualified specialists. We test the material's strength and durability to guarantee that the tools arrive completely prepared for their intended use at the consumer's end.
- Extended Reach for Low Clearance: This jack's long reach allows it to easily access vehicles with low ground clearance, making it particularly useful for sports cars, lowered vehicles, and those with aftermarket modifications.
- Low-Profile Design: With an ultra-low profile, this floor jack can slide under vehicles with minimal ground clearance. This design is perfect for lowered cars or vehicles with low undercarriage, offering enhanced accessibility compared to standard jacks, giving you the confidence to tackle any automotive task.
- RAPID PUMP Technology: Equipped with RAPID PUMP technology, this floor jack features a high-speed hydraulic system that allows for quick lifting with fewer pump strokes. This efficiency saves time and effort during vehicle maintenance or repairs.
- Durable and Sturdy Construction: Constructed from high-strength steel, this floor jack is built to withstand heavy loads and frequent use. Its robust design ensures longevity and reliability, making it a valuable addition to any professional or home garage.
- Enhanced Safety Features: The lift saddle includes a built-in safety valve to prevent overloading and ensure safe operation. The stable lift saddle securely supports the vehicle, preventing accidental slips or movements while elevated. This safety feature is designed to give you peace of mind during your automotive tasks.
- CAR JACK SPECIFICATION: This small car jack has a maximum weight capacity of 2 tons. The adjustable height range is 4.33 inches (11 cm) to 15.75 inches (40 cm). The wider range of adjustment allows you to easily raise your vehicle to any height you need, meeting your vehicle maintenance needs
- LABOR-SAVING & EFFICIENT: This third-generation scissor jack utilizes the latest two-way lifting technology, elongated lever double-turn structure fast lifting, both sides can be moved up at the same time, faster than a single side of the rising. Equipped with a labor-saving ratchet wrench to help you easily raise and lower the jack, so you no longer have to struggle
- TRUSTED QUALITY: Our scissor jack for car is made of high-strength carbon steel material, the load bearing is more stable, so that you can use it for a long time. Reinforced and enlarged base plate allows it to be more stable when lifting and lowering, thereby enhancing safety
- WIDE APPLICATION: This universal car jack set works seamlessly with most medium and light vehicles, including SUVs, MPVs, sedans, coupes, crossovers, and more. It’s ideal for changing a flat tire, freeing a stuck wheel, or tackling other emergency vehicle repairs
- WHAT YOU GET: This complete car jack and stand kit contains 1x 2T scissor jack; 1x ratchet wrench; 1x lug wrench; 2x sockets (17/19mm, 21/23mm) ; 1x gloves; 1x pencil tire pressure gauge; 1x storage bag. Ideal for keeping in the trunk of the car or garage, easy to cope with a variety of emergency repair situations at any time
- Pair of 3 Ton (2.7 metric Ton) jack stands with 6,000-pound capacity
- Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment
- Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use
- Durable steel frame with rustproof coating; easy-to-read weight capacity
- Backed by an Amazon Basics limited 1-year warranty
This product presentation was made with AAWP plugin.