NHTSA ID Number: 10233083
Manufacturer Communication Number: 168913
Summary
CVT Component Design Changes
NUMBER: 16-89-13
DATE: 12/18/13
| APPLICABILITY: | 2014 Forester Turbo Models |
|---|---|
| SUBJECT: | CVT Component Design Changes and Addition of CVT Fluid Filter |
INTRODUCTION
This Service Information announcement provides information regarding three new production enhancements to the CVT transmission (model TR690) used in the Forester model with 2.0L DIT (Direct Injection Turbo) engine:
- An in-line CVT fluid filter has been added to reduce the possibility of contamination entering the lock-up circuit of the valve body
- Machining of an existing fluid passage in the transmission case to accept the new filter
- A smaller corresponding port on the mating surface of the valve body along with a sealing o-ring was added to retain the filter in the transmission case.
COUNTERMEASURE IN PRODUCTION
The revised valve body was incorporated into production 9/17/2013 with transmission #631685.
All three of the changes listed above were incorporated into production 9/21/2013 starting with VIN E*503139 and transmission #632523.
PART INFORMATION
| PART NAME | PART NUMBER |
|---|---|
| Filter Assy- ATF | 31835AA040 |
| Case CP- Trans, AT | 31311AA840 |
| Body AY-Cont Vlv | 31706AA033 |
The illustration below provides additional detail on the transmission case enhancement along with the location and installation of the new filter.
IMPORTANT NOTES:
- The new filter cannot be retro-fitted to CVT transmissions prior to #632523 as there is no provision made into the earlier version main case to accept it.
- There is no scheduled maintenance interval for this new filter.
- The new filter is a one-time use item, if removed for any reason, it must be replaced.
- The transmissions utilizing this new filter are for high-torque output models (e.g. 2014 Forester Turbo) and cannot be retro-fitted.
- The new valve body has applicability to earlier models. Consult the applicable parts catalog for specific applications.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| SUBARU | FORESTER | 2014 |
1 Associated Document
Manufacturer Communications
NUMBER: 16-89-13
DATE: 12/18/13
MC-10233083-9999.pdf 510.408KB
NHTSA ID Number: 10067064
Manufacturer Communication Number: 16-89-13
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1 Associated Document
Service Bulletin Document
NUMBER: 16-89-13
DATE: 12/18/13
SB-10067064-3639.pdf 510.408KB
- 6 Quarts of genuine Subaru CVTF-II fluid
- SOA427V1660 x6 This is green fluid
- 2013-2019 Crosstrek with CVT NON HYBRID, 2014-2016 Crosstrek CVT HYBRID
- 2014-2023 Forester 2.5 Naturally Aspirated with CVT NON TURBO (NOT FOR WILDERNESS)
- 2010-2019 Legacy 2.5 FB25 with CVT, 2010-2014 Legacy 3.6 with CVT, 2010-2019 Outback 2.5 FB25 with CVT, 2010-2014 Outback 3.6 with CVT, 2012-2023 Impreza 2.0 non turbo with CVT
- [Fine Tune Your Vehicle]: Automatic and manual transmission fluid provides hydraulic pressure, lubrication, and friction to your vehicle’s engine; Use the Idemitsu CVT Type SB2 CVT Transmission Fluids 5 Quart Bottle to top off your vehicle and keep you on the road longer
- [Smoother Shifting]: Continuously variable transmission oil will help your gears shift properly to prevent hard or jerky shifting; Designed with frictional properties for superior performance and high torque
- [Extend Engine Life]: Precisely engineered transmission CVT fluid resists buildup; Anti-wear technology protects your belts, gears, and pullies, while high viscosity properties withstand intense temperatures
- [For Your Vehicle]: SB2 CVT fluid is compatible with Subaru TR580 transmissions; Refer to owner manual specifics to ensure compatibility; CVT transmission oil is crafted to meet Type CVTF-II specifications
- [Contents]: Vehicle lubricant package includes 1 bottle of Idemitsu SB2 CVT oil transmission fluid; 1 bottle of 5 quart (4.7L) CVT trans fluid makes refilling your vehicle more convenient
- 8 Quarts of genuine Subaru CVTF-II fluid
- SOA427V1660 x8 This is green fluid
- 2013-2019 Crosstrek with CVT non hybrid, 2014-2016 Crosstrek CVT hybrid
- 2014-2023 Forester 2.5 Naturally Aspirated with CVT non turbo (not for wilderness)
- 2010-2019 Legacy 2.5 FB25 with CVT, 2010-2014 Legacy 3.6 with CVT, 2010-2019 Outback 2.5 FB25 with CVT, 2010-2014 Outback 3.6 with CVT, 2012-2023 Impreza 2.0 non turbo with CVT
- WIDE CVT FIT – NS-3, NS-2, CVTF-II, HCF-2 & CVT FE: Full synthetic CVT transmission fluid formulated for a broad range of belt- and chain-driven CVTs. Compatible with applications requiring Nissan NS-3 / NS-2, Subaru CVTF-II, Lineartronic, Honda HCF-2, Toyota CVT FE, Mitsubishi J4 and many other major CVT fluid specifications.
- ONE FLUID FOR ASIAN, EUROPEAN & DOMESTIC CVTs: Designed for use across a wide range of Nissan, Subaru, Honda, Toyota, Mitsubishi, Hyundai, Kia, BMW, MINI, Mercedes-Benz, Audi, VW and other CVT-equipped vehicles. Helps simplify fluid selection while delivering the friction characteristics required by modern CVT systems
- SMOOTH, QUIET, NON-SLIP PERFORMANCE: Advanced friction control helps reduce CVT shudder, slipping, hesitation and transmission noise while maintaining consistent belt or chain engagement. Delivers smooth acceleration and stable operation across the full CVT operating range.
- FULL SYNTHETIC HIGH-PERFORMANCE FORMULA: Engineered for excellent shear stability, oxidation resistance and film strength under demanding CVT operating conditions. Helps protect belts, chains, pulleys, bearings and other internal components from wear and fluid breakdown.
- ALL-SEASON PROTECTION FROM -40°F TO 230°F: Maintains fluidity during extreme cold starts while providing dependable lubrication and friction stability at elevated operating temperatures. Built for year-round use in severe driving, highway, stop-and-go and high-temperature conditions
SEOCONTENT-START
Bulletin Number: 16-89-13; Date: 12/18/13 Page 1 INTRODUCTION This Service Information announcement provides information regarding three new production enhancements to the CVT transmission (model TR690) used in the Forester model with 2.0L DIT (Direct Injection Turbo) engine: • An in-line CVT fluid filter has been added to reduce the possibility of contamination entering the lock-up circuit of the valve body • Machining of an existing fluid passage in the transmission case to accept the new filter • A smaller corresponding port on the mating surface of the valve body along with a sealing o-ring was added to retain the filter in the transmission case. COUNTERMEASURE IN PRODUCTION The revised valve body was incorporated into production 9/17/2013 with transmission #631685. All three of the changes listed above were incorporated into production 9/21/2013 starting with VIN E*503139 and transmission #632523. PART INFORMATION PART NAME PART NUMBER Filter Assy- ATF 31835AA040 Case CP- Trans, AT 31311AA840 Body AY-Cont Vlv 31706AA033 NUMBER: 16-89-13 DATE: 12/18/13 APPLICABILITY: 2014 Forester Turbo Models SUBJECT: CVT Component Design Changes and Addition of CVT Fluid Filter SERVICE INFORMATION ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS “ISO 14001 COMPLIANT” The international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Bulletin Number: 16-89-13; Date: 12/18/13 Page 2 The illustration below provides additional detail on the transmission case enhancement along with the location and installation of the new filter. IMPORTANT NOTES: • The new filter cannot be retro-fitted to CVT transmissions prior to #632523 as there is no provision made into the earlier version main case to accept it. • There is no scheduled maintenance interval for this new filter. • The new filter is a one-time use item, if removed for any reason, it must be replaced. • The transmissions utilizing this new filter are for high-torque output models (e.g. 2014 Forester Turbo) and cannot be retro-fitted. • The new valve body has applicability to earlier models. Consult the applicable parts catalog for specific applications.
SEOCONTENT-END
This product presentation was made with AAWP plugin.






