NHTSA ID Number: 10219469
Manufacturer Communication Number: 03-88-22
Summary
The bulletin announces the design change made the propeller shaft to address the small number of customer concerns regarding a growling-type sound being heard from under the vehicle when driving.
NUMBER: 03-88-22
DATE: 08/02/22
| APPLICABILITY: | 2013-22MY Crosstrek 2018-22MY Forester |
| SUBJECT: | Propeller Shaft / Design Change |
INTRODUCTION:
The bulletin announces the design change made the propeller shaft to address the small number of customer concerns regarding a growling-type sound being heard from under the vehicle when driving. The center support bearing may become contaminated by heavy exposure to water, snow, mud, and dirt. The new propeller shafts have water-blocking flanges incorporated to prevent any contamination.
AREAS OF DESIGN CHANGE:
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
| Part Description | Model | MY | Transmission | Part Number |
| PROPELLER SHAFT ASSEMBLY | Crosstrek | 13-17 | CVT | 27111FJ081 |
| 13-17 | MT | 27111FJ091 | ||
| 18-22 | CVT | 27111FL140 | ||
| 18-22 | MT | 27111FL150 | ||
| Crosstrek PHEV | 19-22 | CVT | 27111FL230 | |
| Forester | 18 | CVT | 27111FJ081 | |
| 18 | MT | 27111FJ091 | ||
| 19-22 | CVT | 27111FL140 | ||
| 19-22 | MT | 27111FL150 |
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for the propeller shaft replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
Refer to STIS: Driveline/Axle > PROPELLER SHAFT / DRIVE SHAFT / AXLE > Propeller Shaft
15 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 03-88-22
DATE: 08/02/22
MC-10219469-0001.pdf 1530.94KB
- Replacement for Subaru
Legacy 2008-2009 H4 2.0L / for Subaru
Legacy 2005-2009 H4 2.5L / for Subaru
Legacy 2008-2009 H6 3.0L / for Subaru
Legacy 2005-2008 H4 2.5L --- with Automatic Transmission (4-Speed) - OEM Part Number: 936956 27111AG01A, 27111AG05A, 27111AG07A
- Length: 63.125"; Placement On Vehicle: Rear
- MATERIAL & U-JOINT - It is made of high-strength steel, with a polished surface and anti-rust, and is connected with a flexible universal joint, which can adjust the angle and distance more flexibly
- CONDITION - Never used or installed. Pristine condition ensures quality and performance of the product.
- FITS VEHICLE: Driveshaft Assembly Fits For Subaru
Forester 2.5L 2009 2010 2011 2012 - Important Note: Automatic Transmission Only.
- REPLACE OE: 936-902, 65-7005, 27111SC021, 27111SC020, 936902, 657005
- DRIVESHAFT SPECIFICATIONS: Position: Rear Side;Total Length: 61 inch;Shaft Diameter: 2.5 inch;Shaft Wall Thickness: 0.065 inch;Shaft Material: Steel
- Note: Please carefully confirm your OE number before purchasing to ensure that this product is indeed suitable for your car. If you have other questions, please send us an email, we will assist you as soon as possible after receiving the email.
- FITS VEHICLE: Driveshaft Assembly Fits For Subaru
Impreza 2.5L 2007,For Subaru
Outback 2.5L 2005 2006 2007 2008 2009 - Important Note: It fits the model with AWD.Automatic Transmission.
- REPLACE OE: 27111AG11A, 27111AG15A, 65-7001, 936-947
- DRIVESHAFT SPECIFICATIONS: Position: Rear Side;Total Length: 62.875 inch;Shaft Diameter: 2.5 inch;Shaft Wall Thickness: 0.065 inch;Shaft Material: Steel
- Note: Please carefully confirm your OE number before purchasing to ensure that this product is indeed suitable for your car. If you have other questions, please send us an email, we will assist you as soon as possible after receiving the email.
- Fits for Subaru
Baja 2003-2006 2.5L 4Cyl AWD / Legacy 1996-1999 2.5L 4Cyl AWD / Outback 2001-2004 2.5L 4Cyl 3.0L 6Cyl AWD - OEM Part Number: 27111-AE061, 27111-AE062, 936-900,27111AE061,27111AE062,431-59199,43159199, 936900
- Painted with Anti-Corrosion Paint to Prevent Rust Especially for areas of the Country were Snow and Salt are Present
- CONDITION - Never used or installed. Pristine condition ensures quality and performance of the product.
- PREMIUM QUALITY - A high quality, built to strict quality control standards. Direct Fit Replacement Driveshaft.
- Replacement for Subaru
Outback 2005-2009 H4 2.5L / for Subaru
Outback 2005-2009 H6 3.0L - OEM Part Number: 27111AG12A 936914
- Length: 58.38in; Placement On Vehicle: Rear
- Note: It only fits for vehicles with Automatic Transmission, 5 Speed Transmission.
- CONDITION - Never used or installed. Pristine condition ensures quality and performance of the product.
SEOCONTENT-START
Bulletin Number: 03-88-22; Date: 08/02/22 Page 1 of 2 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru
Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru
of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 03-88-22 DATE: 08/02/22 APPLICABILITY: 2013-22MY Crosstrek 2018-22MY Forester SUBJECT: Propeller Shaft / Design Change INTRODUCTION: The bulletin announces the design change made the propeller shaft to address the small number of customer concerns regarding a growling-type sound being heard from under the vehicle when driving. The center support bearing may become contaminated by heavy exposure to water, snow, mud, and dirt. The new propeller shafts have water-blocking flanges incorporated to prevent any contamination. AREAS OF DESIGN CHANGE: ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2022 Subaru
of America, Inc. All rights reserved. Bulletin Number: 03-88-22; Date: 08/02/22 Page 2 of 2 PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Part Description Model MY Transmission Part Number PROPELLER SHAFT ASSEMBLY Crosstrek 13-17 CVT 27111FJ081 13-17 MT 27111FJ091 18-22 CVT 27111FL140 18-22 MT 27111FL150 Crosstrek PHEV 19-22 CVT 27111FL230 Forester 18 CVT 27111FJ081 18 MT 27111FJ091 19-22 CVT 27111FL140 19-22 MT 27111FL150 SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for the propeller shaft replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair. Refer to STIS: Driveline/Axle > PROPELLER SHAFT / DRIVE SHAFT / AXLE > Propeller Shaft WARRANTY / CLAIM INFORMATION: For vehicles within the Powertrain Warranty, or covered by an active Subaru
Added Security Powertrain, Classic or Gold plan, this repair may be submitted using the following claim information: Labor Description Labor Operation # Fail Code Labor Time PROPELLER SHAFT, U JOINT/DOJ R&R B372-601 KTU-25 0.5 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
SEOCONTENT-END
This product presentation was made with AAWP plugin.





