NHTSA ID Number: 10240111
Manufacturer Communication Number: 07-223-23R
Summary
This bulletin announces the availability of a new Genuine Subaru Replacement Battery introduced to replace the current battery (SOA821B400). The new battery (SOA821B950) has a higher capacity and is slightly different in size.
NUMBER: 07-223-23R
DATE: 07/11/23
REVISED: 07/13/23
INTRODUCTION:
This bulletin announces the availability of a new Genuine Subaru Replacement Battery introduced to replace the current battery (SOA821B400). The new battery (SOA821B950) has a higher capacity and is slightly different in size. When replacing an originally equipped battery with the new SOA821B950 Genuine Subaru Replacement Battery, additional parts and slight modifications will be required to ensure proper positioning and security. Please refer to the work procedures outlined below.
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
| Part Description | Part Number |
| BATTERY | SOA821B950 |
| Part Description | Part Number |
| BATTERY COVER | 82123AN000 |
| SPACER (3.6L ONLY) | 82190AL000 |
NOTE: The parts listed above must be ordered through PRIME.
SERVICE PROCEDURE / INFORMATION:
Please review the battery identification, charging, and testing information provided in Service Bulletin 07-178-21 before performing any battery testing and/or charging. ALWAYS confirm Midtronics equipment has the latest software available.
NOTE: The original battery holder, battery tray, and holding rods are to be reused.
STEP 1: Remove the battery as per the applicable Service Manual: Engine > STARTING/CHARGING SYSTEMS > Battery > Removal
STEP 2: Install the NEW battery cover (82423AN000) to the replacement battery. Confirm the bottom of the cover is aligned flush with the bottom of the battery.
STEP 3: Battery Installation
A. 5L Equipped Models ONLY: Install the battery as per the applicable Service Manual:
Engine > STARTING/CHARGING SYSTEMS > Battery > Installation. Proceed to Step 6.
B. 6L Equipped Models ONLY: Install the battery with spacer (82190AL000) to the rear side of the battery tray. The spacer must be installed with the flat side against the battery and the notched portion facing the bottom of the battery tray. See the images below.
Install the battery as per the applicable Service Manual: Engine > STARTING/CHARGING SYSTEMS > Battery > Installation. Proceed to Step 4.
IMPORTANT NOTE: ALWAYS confirm the spacer fitment is flush when securing the battery with the hold down and hold down rods.
STEP 4: Install the battery holder and holding rods onto the battery.
A. Torque the two holding rod mounting nuts to 5 N·m (5.5 ft-lbs. or 66 inch-lbs.).
B. Torque the positive terminal to 6 N·m (4 ft-lbs. or 53 inch-lbs.).
C. Torque the negative terminal to 5 Nm (5.5 ft.-lbs. or 66 inch-lbs.).
D. If the battery sensor is removed or disconnected torque to 6 Nm (4.4 ft.-lbs. or 53 inch lbs.) while supporting the sensor with the other hand as outlined in the applicable Service Manual under: STARTING/CHARGING SYSTEMS> Battery Sensor.
NOTE: Confirm the battery holder is center mounted with the battery cables secured and routed correctly.
12 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 07-223-23R
DATE: 07/11/23
REVISED: 07/13/23
NHTSA ID Number: 10240107
Manufacturer Communication Number: 07-223-23
Summary
This bulletin announces the availability of a new Genuine Subaru Replacement Battery introduced to replace the current battery (SOA821B400) once current inventory is depleted.
1 Associated Document
Manufacturer Communications
NUMBER: 07-223-23
DATE: 07/11/23
MC-10240107-0001.pdf 510.197KB
- Catch Battery Problems Early: Featured in two videos by Project Farm, a popular YouTube channel with millions of subscribers, the ANCEL BA101 helps you quickly spot battery issues before they leave you stranded. It provides easy-to-understand readings for State of Health (SOH), State of Charge (SOC), voltage, current, CCA, plus cranking and charging system tests, so you can better understand your battery and help avoid unexpected breakdowns
- Know the Real Condition: Don’t let inaccurate readings lead to costly surprises. Built with high-quality copper crocodile clips and a precision smart chip, this battery tester is designed to deliver dependable results. For the most accurate test, enter the correct battery type, rating value (such as CCA/Ah), and temperature exactly as shown on your battery label, so you get a clearer picture of your battery’s true condition
- Fast, Clear, Hassle-Free Testing: The classic black-and-white screen, adjustable contrast, and white backlight make results easy to read in bright sunlight or low-light conditions. One-handed operation keeps testing simple, while direct power from your vehicle’s battery means no charging and no internal batteries to deal with. Multi-language support makes it easier for more users to test with confidence
- Protection When Mistakes Happen: Built-in 4-in-1 protection helps guard against reverse polarity, short circuits, overcurrent, and overvoltage for safer testing, especially in tight spaces where clamp slips or wiring mistakes can happen. The 3x reinforced ABS housing adds extra durability and helps protect both the tester and your battery during everyday use
- Built for More 12V Batteries: Supporting global standards including JIS, EN, DIN, SAE, BCI, GB, CA, MCA, and IEC, this tester works with 12V batteries used in cars, trucks, boats, RVs, ATVs, lawnmowers, golf carts, and motorbikes over 30Ah. Compatible with Flooded, AGM, GEL, and EFB batteries. Not for lithium batteries, non-12V batteries (6V/8V/24V), or motorcycles below 30Ah. For 6V testing, choose BA101 Plus. For 24V testing, choose BA101 PRO
- [Car Battery Tester] You can easily test and inspect your 12V lead-acid battery with this TOPDON car battery tester. The SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and numerous other understandable analytical data are provided by this battery tester. It is compatible with 100-2000CCA regular flooded, AGM flat plate/spiral, EFB, and GEL for their optimum performance.
- [Wide Application] This 12V battery load tester can only be powered on once it is properly attached thanks to a safe passive testing approach. You may test the batteries of a number of vehicles, including cars, motorbikes, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers, and even golf carts, without needing to charge the device first.
- [3 Testing Function] A battery health test will determine whether or not the battery is in excellent operating order. A cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current, rectifier diode, and generator are all functioning normally. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.
- [Ergonomic Features] To help you rapidly determine the health of the battery, this load battery tester is built with three different colors of LEDs. It's easy to use because it operates through a menu system. Additionally, for a reliable and secure connection during the testing process, premium-quality copper clamps have polarity reverse prevention and spark proof features.
- [Great Choice] The TOPDON BT100 is small and compact, making it simple to keep in a glove box or center console. This battery load tester's rapid and precise results will enable you to decide whether your car battery needs to be replaced or jump-started making it an excellent choice for auto shops, garages, and DIY users who frequently check batteries.
- 🔥【A MUST HAVE TOOL IN YOUR GARAGE】 - With up-to-date testing technology, it provides a quick reading to determine whether a vehicle battery needs a jump or replacement and also the output status of the alternator. All you have to do is log in and play. Save your time and money.
- 🔥【BATTERY HEALTH CONTROL】 - Applied with the latest test algorithm, the tester will analyze the battery and get the results in seconds, including health status, charging status, internal resistance and test conclusion (mediocre, good, excellent). All types of 12V 100-2000CCA lead acid batteries can be tested.
- 🔥【START AND CHARGE SYSTEM TEST】 - Test the starting voltage of the alternator when starting the engine to see if it is low or under normal conditions. Check the continuous power of the alternator when the engine is running to see if the alternator provides adequate power to the battery and electrical system.
- 🔥【Real Time Wave Display & Data Printing】 - When you need more details about the performance of your battery or alternator when working, you can use the wave viewing function to monitor the output curve in real time. It gives you all the detailed changes of the output.
- 🔥【3 inch color LCD screen and 9 languages supported】 - The 3 inch color LCD screen (240 x 320 pixels) is user-friendly and easy to read. Give you a more comfortable viewing experience with every inspection. 9 languages supported - English, Spanish, French, German, Italian, Russian, Portuguese, Chinese and Polish.
- 【Reliable Car Battery Tester】: The alternator tester can accurately determine whether the car battery needs to be replaced or if there is a power outage, and at the same time evaluate the output status of the alternator, clearly presents real-time voltage data, battery health and charging status. It can effectively prevent the battery from being damaged due to overcharging or undercharging, and extend the battery's service life.
- 【Clear LED Display】: The car battery tester is equipped with a digital display LED screen, which can clearly present the measurement values at night, providing strong assistance for measurement work and allowing you to easily read the data.
- 【Easy to Use】: This car battery capacity analysis is simple and convenient. You just need to connect the positive and negative poles correctly to the alternator. Connect the red clip to the positive pole and the black clip to the negative pole. When the battery is fully charged, the "FULL" display will light up. When the battery is too high, the "HIGH" display will light up. When the battery is low, the "LOW" display will light up. When the battery is dead, the "EMPTY" display will light up.
- 【Protection Features】: The car battery tester includes reverse connection protection and over-voltage protection, which can effectively prevent damage caused by wiring errors. When the positive and negative poles are reversed, the LED display will not show, the "REVERSE" LED will light up and a buzzer alarm will sound. If the voltage exceeds the safety threshold, the "HIGH" indicator will light up immediately, triggering the device's over-voltage protection mechanism.
- 【Widely Used】: The alternator tester is suitable for measurement in most vehicles equipped with 12V batteries, such as cars, off-road vehicles, trucks, motorcycles, ships, golf carts, lawnmowers, etc. It can meet your diverse testing needs.
- 【Reliable Automotive Car Battery Tester】 KW208 is the most cost-effective battery load tester compared to other brands, it has all the functions you need and the lowest cost that you can afford. KW208 can test all 12V batteries(100-2000CCA) including regular flooded, AGM flat plate, AGM spiral or gel batteries. Provide overall analysis of batteries’ condition and help you know their status in advance before it dies. KW208 battery analyzer supports cranking and charging system tests also alternator and starter test. Conveniently store this car battery tester for batteries in your glove box or garage, ready for use whenever needed.
- 【Galvanized Alloy Battery Clips】This battery tester has updated it's clips since 2025, thanks for the galvanized alloy battery clips, it's more durable also bring lager contact when connected with battery, it greatly improved the testing accuracy(99.7%) also safer with fully wrapped material. KW208 12V battery load tester gives you reliable and overall battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or recharge the battery. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
- 【 >99.7% High Accuracy】Thanks to KW208 meter‘s powerful and smart AI chip, it provides more than 99.7% precise testing results within milliseconds, greatly improving the testing speed and testing accuracy compared to other battery testers. Besides KW208 is the only battery tester that has over 7000+ rating and is the most reliable and popular car battery tester on Amazon.
- 【Plug and Play】 KW208 12 volt battery load tester and analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and be ready to test and analyze battery. It’s that easy! Definitely KW208 is your best choice for there is no need to spend more expensive cost to purchase battery testers as their functions are the same.
- 【Starter& Alternator Tester】KW208 not only a great car battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions. And it can also switch up to 8 languages for different needs.
SEOCONTENT-START
Bulletin Number: 07-223-23R; Revised: 07/13/23 Page 1 of 3 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 07-223-23R DATE: 07/11/23 REVISED: 07/13/23 APPLICABILITY: 2014-19 Legacy & Outback SUBJECT: New Genuine Subaru Replacement Battery (SOA821B950) INTRODUCTION: This bulletin announces the availability of a new Genuine Subaru Replacement Battery introduced to replace the current battery (SOA821B400). The new battery (SOA821B950) has a higher capacity and is slightly different in size. When replacing an originally equipped battery with the new SOA821B950 Genuine Subaru Replacement Battery, additional parts and slight modifications will be required to ensure proper positioning and security. Please refer to the work procedures outlined below. PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Part Description Part Number BATTERY COVER 82123AN000 SPACER (3.6L ONLY) 82190AL000 Part Description Part Number BATTERY SOA821B950 NOTE: The parts listed above must be ordered through PRIME. SERVICE PROCEDURE / INFORMATION: Please review the battery identification, charging, and testing information provided in Service Bulletin 07-178-21 before performing any battery testing and/or charging. ALWAYS confirm Midtronics equipment has the latest software available. NOTE: The original battery holder, battery tray, and holding rods are to be reused. STEP 1: Remove the battery as per the applicable Service Manual: Engine > STARTING/ CHARGING SYSTEMS > Battery > Removal ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2023 Subaru of America, Inc. All rights reserved. Bulletin Number: 07-223-23R; Revised: 07/13/23 Page 2 of 3 Continued… STEP 2: Install the NEW battery cover (82423AN000) to the replacement battery. Confirm the bottom of the cover is aligned flush with the bottom of the battery. STEP 3: Battery Installation A. 2.5L Equipped Models ONLY: Install the battery as per the applicable Service Manual: Engine > STARTING/CHARGING SYSTEMS > Battery > Installation. Proceed to Step 6. B. 3.6L Equipped Models ONLY: Install the battery with spacer (82190AL000) to the rear side of the battery tray. The spacer must be installed with the flat side against the battery and the notched portion facing the bottom of the battery tray. See the images below. Install the battery as per the applicable Service Manual: Engine > STARTING/CHARGING SYSTEMS > Battery > Installation. Proceed to Step 4. IMPORTANT NOTE: ALWAYS confirm the spacer fitment is flush when securing the battery with the hold down and hold down rods. Bulletin Number: 07-223-23R; Revised: 07/13/23 Page 3 of 3 STEP 4: Install the battery holder and holding rods onto the battery. A. Torque the two holding rod mounting nuts to 7.5 N·m (5.5 ft-lbs. or 66 inch-lbs.). B. Torque the positive terminal to 6 N·m (4.4 ft-lbs. or 53 inch-lbs.). C. Torque the negative terminal to 7.5 Nm (5.5 ft.-lbs. or 66 inch-lbs.). D. If the battery sensor is removed or disconnected torque to 6 Nm (4.4 ft.-lbs. or 53 inchlbs.) while supporting the sensor with the other hand as outlined in the applicable Service Manual under: STARTING/CHARGING SYSTEMS> Battery Sensor. NOTE: Confirm the battery holder is center mounted with the battery cables secured and routed correctly. WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period, this repair may be submitted using the following claim information: Labor Description Labor Operation # Labor Time Fail Code STD FLOODED BATT TEST & REPL W/ ENHANCED FLOODED BATT A800-003 0.5 FFG-42 NOTE: A valid battery test code or an authorization with reason for leaking/cracked battery will be required for Claim submission. IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.