NHTSA ID Number: 10080548
Manufacturer Communication Number: 02-158-14R
Summary
THIS SERVICE INFORMATION BULLETIN ANNOUNCES CHANGES TO THE COMPONENT PARTS OF THE ACCESSORY DRIVE BELT TENSIONER ASSEMBLY USED ON 3.6L H-6 ENGINES. THESE DESIGN CHANGES WILL INCREASE THE RIGIDITY OF THE TENSIONER ASSEMBLY WHILE IMPROVING PRODUCTION EFFICIENCY.
NUMBER: 02-158-14R
DATE: 11/21/14
REVISED: 01/09/15
| APPLICABILITY: | 2015MY Legacy & Outback Models with 3.6L Engine |
| SUBJECT: | Accessory Drive Belt Tensioner Component Changes |
INTRODUCTION
This Service Information bulletin announces changes to the component parts of the accessory drive belt tensioner assembly used on 3.6L H-6 engines. These design changes will increase the rigidity of the tensioner assembly while improving production efficiency.
COUNTERMEASURE IN PRODUCTION
The new accessory belt tensioner components were incorporated into production on July 18, 2014 starting with Engine Number: 552158.
PART INFORMATION
| PART NUMBER | DESCRIPTION |
|---|---|
| 13086AA200 | BRKT- TENSIONER |
| 13082AA020 | STOPPER- BELT ADJ |
| 13063AA020 | WASH- BELT ADJ |
| 800110670 | BOLT- 10 X 70 X 70 |
SERVICE PROCEDURE / INFORMATION
When repairing or replacing the belt tensioner or its component parts, follow the procedures outlined in the applicable Service Manual.
**VERY IMPORTANT: If any of the four belt tensioner components described in this bulletin require replacement, ALL FOUR PARTS MUST BE REPLACED AS A SET as they cannot be mixed and matched.
REMINDER: SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. Always refer to STIS for the latest service information before performing any repairs.
2 Affected Products
Vehicles
1 Associated Document
Service Bulletin Document
NUMBER: 02-158-14R
DATE: 11/21/14
REVISED: 01/09/15
SB-10080548-0699.pdf 398.262KB
NHTSA ID Number: 10233045
Manufacturer Communication Number: 0215814
Summary
Accessory Drive Belt Tensioner Component Changes
1 Associated Document
Manufacturer Communications
NUMBER: 02-158-14
DATE: 11/21/14
MC-10233045-9999.pdf 401.516KB
- 【Fast And Accurate Hitting Measurements】: Our belt tension gauges are clearly marked with easy to read markings to help you quickly, easily, and accurately measure belt tension to aid in your vehicle adjustments and extend the life of your belts.
- 【Easy To Use】: Place the small O on top of the 10 lb mark and rest the U shaped bracket at a 90° angle against the bottom of the belt, position the large O- to the reference point and record the reading. Then push up on the rubber bumper until the small O touches the bottom of the tool body, then reposition the large O to the reference point, and the difference in the reading is the belt deflection.
- 【U Bracket】: This universal belt tension gauge has a universal U bracket designed to hold the belt firmly in place while you adjust the tension, helping to reduce friction when tensioning the belt properly to extend the life of the belt.
- 【Universal Belt Tensioner】: This belt tension in gauge can be used on any vehicle, ATV or motorcycle with an auxiliary transfer belt and a 10 lb. weight, etc. Ideal for motorcycle belt replacement, adjustment or repair.
- 【We Care About You】: Satisfying every customer is our service tenet, if you have more questions about our belt tension tool or encounter difficulties in the shopping process, please feel to us and we will respond to you within 24 hours on business days.
- Indicates tension on all V-belt drives (3L, 4L, 5L, A, B, C, AX, BX, CX, 3V, 5V, 8V)
- Compact, spring loaded design
- Easy to operate; instructions included
- Adjustable for 10" to 170" belt span and up to 35 pounds of tension
- proper tensioning is necessary to avoid premature belt wear
- OTC's Belt Tension Gauge is designed to allow you to accurately check that belt tension on drive belts is within the manufacturer specified tension range for the application for maximum component longevity
- Correct belt tension is critical for ensuring the longest belt life while delivering the correct tension to properly power accessory components without creating excessive loads on bearings
- Easy to read, full-color dual scale reads 30-180 foot pounds and 130-800 newton meters - no conversion necessary for newton meter specifications often used by British and European manufacturers
- Premium materials, precision castings, and careful assembly ensure exceptional accuracy and performance over the lifetime of the tool
- Designed for use on a wide range of automotive, motorcycle, and industrial belts
- Calibrate Belt Tension with Detailed Precision: Achieve accurate measurements effortlessly across all belts, making adjustments smoother and more convenient
- Digital Electronic Sensor: Clear large screen digital display screen, making reading more convenient; Smaller error, no need to worry about inconsistent tension caused by errors; One click zeroing, quick calibration of tension meter
- Hollow Aluminum Alloy Frame Design: Lightweight design, more accurate reading, no need to worry about reading errors due to weight; The frame is made of aluminum alloy material with oxidation sandblasting, which has a more exquisite appearance and a more delicate touch, without the cheap-feeling of a printed parts
- Easy to Operate: Equipped with custom printed parts for one handed operation, the operation is simple and fast, effectively helping to quickly calibrate belt tension without worrying about cumbersome use
- Complete Supporting Materials: Specially designed to provide users with complete supporting materials for easy debugging and calibration, to solve your doubts as much as possible, and to make use simpler
- Scale reads in pounds and kilograms
- Measures tension from 30 to 160 lb., and 15 to 75 kg.
- Die-cast aluminum body, nylon indicator arm and pressure pad
- Fits in pocket with stainless steel pocket clip
- Note: Not for use on timing belts
This product presentation was made with AAWP plugin.