Uneven Gap between Dash Pad and Center Air Vent Grille – 2013-2014 Subaru BRZ

NUMBER: 12-171-15 DATE: 07/27/15 APPLICABILITY: 2013-14MY BRZ SUBJECT: Uneven Gap between Dash Pad and Center Air Vent Grille   INTRODUCTION This bulletin will address customer concerns of an uneven gap appearing between the top of the center dash air vent grille and the instrument panel dash pad directly above it.  The photo below shows the uneven … Read more

Rust Treatment Procedure for Heat Shield Retaining Bolt Heads – 2015 Subaru

Subaru Logo

NUMBER: 09-59-14R DATE: 11/18/14 REVISED: 07/27/15 APPLICABILITY: 2015MY WRX Models with 2.0L DIT Engine 2015MY Legacy and Outback 2.5L SUBJECT: Rust Treatment Procedure for Heat Shield Retaining Bolt Heads   INTRODUCTION This bulletin provides a treatment procedure to address a customer concern of rust developing on the front exhaust pipe heat shield retaining bolt heads as … Read more

Interference between the Fender and Side Marker Lamp – 2013 Subaru BRZ

NUMBER: 07-94-15 DATE: 07/23/15 APPLICABILITY: 2013MY BRZ SUBJECT: Interference between the Fender and Side Marker Lamp   INTRODUCTION This bulletin provides a repair procedure to address concerns of contact between the top horizontal edge of the side marker lamp and the corresponding fender edge as shown in the photo to the right.     PART INFORMATION … Read more

Unnecessary Power Window Switch Replacements – 2015-2017 Subaru Legacy & Outback

2016 Subaru Legacy

NUMBER: 07-93-15 DATE: 07/23/15 APPLICABILITY: 2015 MY and Later Legacy and Outback Models with Auto-Up / Down Power Window Feature SUBJECT: Unnecessary Power Window Switch Replacements   INTRODUCTION This Service Information bulletin provides the procedure to follow when receiving a customer concern regarding operation of their power window Auto-Up and/or Auto-Down feature.  Testing of returned power … Read more

Condensation (Fogging) in Rear Combination Lamps – 2015 Subaru Forester

2015 Subaru Forester

NHTSA ID Number: 10091972 Manufacturer Communication Number: 07-92-15 Summary THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE REAR COMBINATION LAMPS TO ADDRESS CUSTOMER CONCERNS OF FOGGING OR CONDENSATION ACCUMULATING ON THE INSIDE SURFACE OF THE LENS. SIX ADDITIONAL BREATHING HOLES HAVE BEEN ADDED TO THE BODY OF THE LAMP ASSEMBLY. THE ADDITIONAL HOLES ARE INTENDED … Read more