NHTSA ID Number: 10163524
Manufacturer Communication Number: 10-90-19R
Summary
This bulletin announces a design change made to the HVAC control panels for the models listed above. The change will address customer concerns of the seat heater switches sticking in the “pressed” position but not returning to “flush” with the face of the control panel when released as shown in the photos below. A series of small air outlets (vents) has been added to the assembly to keep dust and dirt from accumulating and causing the switches to bind.
10 Affected Products
Vehicles
INTRODUCTION:
This bulletin announces a design change made to the HVAC control panels for the models listed above. The change will address customer concerns of the seat heater switches sticking in the “pressed” position but not returning to “flush” with the face of the control panel when released as shown in the photos below. A series of small air outlets (vents) has been added to the assembly to keep dust and dirt from accumulating and causing the switches to bind.
PRODUCTION CHANGE INFORMATION:
This bulletin will be revised with the applicable VIN break information when it becomes available.
PART INFORMATION:
| Description | Part Number | Model Year | Application |
|---|---|---|---|
| HEATER CONTROL ASSEMBLY | 72311AL11B | 2016-17 | Auto A/C, w/ seat heater & heated mirror |
| 72311AL21A | 2015-17 | Manual A/C, w/ seat heater & heated mirror | |
| 72311AL31B | 2018-19 | Manual A/C, w/ seat heater & heated mirror |
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for diagnosis and replacement of the HVAC control panel remains unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related onetime-use parts needed for a complete and lasting repair.
SEOCONTENT-START
Bulletin Number: 10-90-19R; Revised: 07/10/19 Page 1 of 2
INTRODUCTION:
This bulletin announces a design change made to the HVAC control panels for the models listed
above. The change will address customer concerns of the seat heater switches sticking in the
“pressed” position but not returning to “flush” with the face of the control panel when released as
shown in the photos below. A series of small air outlets (vents) has been added to the assembly to
keep dust and dirt from accumulating and causing the switches to bind.
PRODUCTION CHANGE INFORMATION:
This bulletin will be revised with the applicable VIN break information when it becomes available.
Continued…
NUMBER: 10-90-19R
DATE: 02/28/19
REVISED: 07/10/19
APPLICABILITY: 2015-2019MY Legacy and Outback
SUBJECT: Seat Heater Switches Sticking, Design
Change to HVAC Control Panel
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued…
SERVICE BULLETIN
ATTENTION:
GENERAL MANAGER q
PARTS MANAGER q
CLAIMS PERSONNEL q
SERVICE MANAGER q
IMPORTANT – All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
©2019 Subaru of America, Inc. All rights reserved.
Bulletin Number: 10-90-19R; Revised: 07/10/19 Page 2 of 2
PART INFORMATION:
Description Part Number Model Year Application
HEATER
CONTROL
ASSEMBLY
72311AL11B 2016-17 Auto A/C, w/ seat heater & heated mirror
72311AL21A 2015-17 Manual A/C, w/ seat heater & heated mirror
72311AL31B 2018-19 Manual A/C, w/ seat heater & heated mirror
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN
being repaired.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for diagnosis and replacement of the HVAC control panel remains unchanged.
Always refer to the applicable Service Manual and review the full requirements of the repair
being performed. The Service Manual procedures contain information critical to performing an
effective repair the first time and every time. This includes but is not limited to: important SAFETY
precautions, proper inspection criteria, necessary special tools, required processes and related onetime-
use parts needed for a complete and lasting repair.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Classic or Gold plan, this repair may be submitted using the following claim
information:
Labor Description Labor Operation # Labor Time Fail Code
SEAT HEATER SWITCH R&R ONE / BOTH B870-411 0.3
UAQ-21
SEAT HEATER SYSTEM DIAGNOSIS C870-001 0.4
IMPORTANT REMINDERS:
• SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
• Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
• Always refer to STIS for the latest service information before performing any repairs.
NUMBER: 10-90-19R
DATE: 02/28/19
REVISED: 07/10/19
NUMBER: 10-90-19
DATE: 02/28/19
- The Tusk UTV Seat Heater is the ideal accessory to add to your machine when riding in cold weather conditions.
- Cold Weather Seat Heating - Provides consistent warmth for UTV riding in cold conditions with a maximum temperature of 158°F (70°C).
- Adjustable Heat Settings - Includes an on/off switch with High and Low settings to control heat output while riding.
- Under-Seat Installation - Heating panel installs beneath the seat cover and connects directly to the vehicle battery.
- Universal Fit Design - Designed to work with most UTV seats without modification.
- Heating Pad Versatile Use:Made with soft flannel fabric, it is designed for women and men to warm up their entire body more quickly, covering the back, neck, shoulders, abdomen, arms, legs, and feet, etc.It's a Perfect valentine's day gifts for her him,Great Gift for friend and elderly
- Heating Pad for Back 6 Heating Levels & 4 Timer Setting：Choose from 6 adjustable heat settings to find your perfect level of warmth and comfort.The timer can be set to 30/60/90/120 minutes.Heating pad with overheat protection and 2 hours auto shut-off ensures your peace of mind after each use
- Electric Heat Pad is Different Colors and Sizes:including 12”x 24”, 20”x 24 ”, 33”x 17” and 40”x 20”,Suitable for different body types and usage scenarios.say goodbye to a single color tone, our heating pads come in a variety of colors for you to choose from，add vibrant colors to your life
- Electric Blanket Easy to Use: The 75 inch power cord allows you extra movement while using it.You can easily adjust the position and placement of the heating pad whether you're on the sofa, in bed, in the office, or in your favorite chair
- Our heating pad is easy maintenance,machine wash-safe to make clean-up a breeze. Simply unplug and toss right in for a thorough cleansing before next use,you need to make sure it is completely dry before reassembling the unit. Since it has built-in heating wires, please do not machine wash it frequently
- 1.Thick & Soft Sitting Experience - This heated chair pad for office has a surface made of fleece fabric and is filled with memory foam inside. The heating pad has a thickness of 1.6 inches, providing you with greater comfort when sitting and keeping warm in winter.
- Versatile Compatibility: This universal seat comfort kit is designed to fit various models of cars, pickup trucks, and other vehicles.
- Cozy: Equipped with a cushion, this kit provides soothing warmth for enhanced comfort during cold weather drives.
- Customizable Temperature: Adjust the temperature settings to your desired level for personalized preferences.
- Convenient Installation: Easy to set up and remove, allowing you to use it in multiple vehicles as needed.
- Compact and Portable: The kit's compact size makes it easy to store and transport when not in use.
- 1.The Universal Seat comfort Kit is designed to fit into 90% of vehicles.
- 2.The Cushion is equipped with a temperature protector.
- 3. Online installation video.
- 4. This product is prohibited for use by unconscious persons and people with reduced mobility.
This product presentation was made with AAWP plugin.