Accessory Installation Guide
Subaru Battery Tie Down
2020 WRX | SOA3881270 |
SEOCONTENT-START
A
BATTERY TIE DOWN X 1
B
TOOLS REQUIRED
INSTRUCTIONS LABELS X1
10mm DEEP SOCKET
MEANING OF CHARACTERS
INSTALLATION INSTRUCTIONS
PART NUMBER SOA3881270
ISSUE 01
DATE 02/08/19
PAGE 1/2
PART NUMBER: SOA3881270
DESCRIPTION: SUBARU BATTERY TIE DOWN
SUBARU OF AMERICA
RE-USE 10mm RE-USE
10mm RE-USE RE-USE
SUBARU OF AMERICA
2: REMOVE NUTS
PAGE
2/2
PART NUMBER
SOA3881270
ISSUE
01
DATE
02/08/19
ALL MODELS
4: INSTALL SUBARU BATTERY TIE
DOWN
ALL MODELS
ALL MODELS
3: REMOVE BATTERY TIE DOWN
6: REINSTALL CABLE TIE CLIP
REMOVED IN 1
5: REINSTALL NUTS REMOVED IN 2.
TIGHTENING TORQUE: 3.5 NM
(0.4 KGF-M, 2.6 FT-LB)
ALL MODELS
1: REMOVE CABLE TIE CLIP
INSTALLATION INSTRUCTIONS
ALL MODELS ALL MODELS
A
ATTACHE DE BATTERIE X 1
B
OUTILS REQUIS
ÉTIQUETTES D’INSTRUCTIONS X1
DOUILLE LONGUE DE 10 MM
NUMÉRO DE PIÈCE : SOA3881270
INSTRUCTIONS D’INSTALLATION
DESCRIPTION : ATTACHE DE BATTERIE SUBARU
SIGNIFICATION DES SYMBOLES
NUMÉRO DE PIÈCE SOA3881270
VERSION 01
DATE : 8 février 2019
SUBARU OF AMERICA
PAGE 1 de 2
Retirer
Retirer
Installer
Installer
Déconnecter
Déconnecter
Connecter
Connecter
Emplacement de l’attache
Emplacement de l’attache ou de la visou de la vis
Couple de
Couple de serrageserrage
Desserrer
Desserrer
Jeter
Jeter
Réutiliser
Réutiliser
RÉUTILISER 10 mm RÉUTILISER
10 mm RÉUTILISER RÉUTILISER
INSTRUCTIONS D’INSTALLATION
TOUS LES
MODÈLES
TOUS LES
MODÈLES
1. RETIRER L’ATTACHE-CÂBLE 2. RETIRER LES ÉCROUS
6. REMETTRE EN PLACE L’ATTACHECÂBLE
RETIRÉ À L’ÉTAPE 1
TOUS LES
MODÈLES
TOUS LES
MODÈLES
3. RETIRER L’ATTACHE DE
BATTERIE
4. INSTALLER L’ATTACHE DE
BATTERIE SUBARU
NUMÉRO DE PIÈCE
SOA3881270
VERSION
01
DATE :
8 février 2019 SUBARU OF AMERICA PAGE
2 de 2
TOUS LES
MODÈLES
TOUS LES
MODÈLES
5. REMETTRE EN PLACE LES ÉCROUS
RETIRÉS À L’ÉTAPE 2. COUPLE DE
SERRAGE : 3,5 N.M (0,4 KGF-M, 2,6 LB-PI)
SEOCONTENT-END
- Part Type: Battery hold down kit
- Compatible with Subaru Forester 2009-2024, Impreza/WRX/STI 2008-2016, Crosstrek 2013-2023 (Replaces 82182AG001, 82161AG001, 82161AG012)
- The Battery Tie Down Holder Clamp is made of steel and coated with a thermosetting baked powder finish to ensure anti-rust and long-lasting performance
- Package Included: Battery Holder 82182AG001, J Hook 82161AG001, J Hook 82161AG012, Nut 023806006
- NOTE: Please carefully check your vehicle type with our fitment, and please compare our part pictures with your old part to avoid the wrong purchase
- Packing: Battery Holder 82182AG001 x1, J Hook 82161AG001 x1, J Hook 82161AG012 x1, Nut 023806006 x2
- Battery hold down kit: Fit for Subaru BRZ, Crosstrek, Forester, Impreza, Impreza STI, Impreza WRX, WRX, WRX STI, XV Crosstrek
- Battery tie down holder clamp: Replacement for 2013-2020 Subaru BRZ, 2016-2021 Subaru Crosstrek, 2009-2013 Subaru Forester, 2006-2016 Subaru Impreza, 2006-2014 Subaru Impreza STI
- Battery tie down holder clamp: Replacement for 2006-2014 Subaru Impreza WRX, 2015-2020 Subaru WRX, 2015-2020 Subaru WRX STI, 2013-2015 Subaru XV Crosstrek
- Material specification: Made of iron and steel, with a surface spray coating, it is resistant to corrosion and rust, has a long service life, and is easy and simple to install
- Superior Material: Car battery bracket is made of high quality aluminum alloy, sturdy structure, anti-oxidation, not easy to rust or break, the surface is specially treated, glossy and bright, eliminating abrasion marks and burrs
- Practical Function: Battery tie down can serve to fix and balance the battery, effectively protect your battery and ensure your safety while driving. It stabilizes the battery and also effectively protects it from battery damage caused by long hours of driving. It is suitable for most flat-top battery installations
- Package Includes: 1 x black car battery holder bracket, 2 x 10 inch J-hooks, 2 sets of accessories (for different mounting methods) - 2 wing bolts, 2 hex nuts, 2 rubber protectors, 2 rubber protectors washers, 2 spring lock washers, 2 flat washers. Easy to install, simply replace the old battery holder to better secure the battery
- Product Dimensions: The overall dimensions of battery tie down bracket are 8.54 × 1.76 × 0.27 inch with a length of 7.48 inch between the two bolts. It also comes with two J-hooks, each with an overall length of 10 inch and a screw section with a length of 4 inch
- Widely Compatible: Battery hold down kit typically fits most groups 21, 21R, 22F, 22HF, 22R, 24, 24H, 24R, 24T, 25, 26, 26/70 27, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 40R, 41, 42 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R, 95R, 96R, 97R, 98R, 99, 124, and 140R batteries. (NOTE: This strap does not fit between the raised vent caps on some battery surfaces)
- Compatible Models:for Subaru Forester 2009-2024, Impreza/WRX/STI 2008-2016, Crosstrek 2013-2023 (Replaces 82182AG001, 82161AG001, 82161AG012)
- Product includes:304 stainless steel J bolt and flange nut kits, Package: 1x battery holder bracket, 2x J Hook , 2x Nut.
- Heavy-Duty 16-Gauge Steel & Excellent Durability: Tailored for Toyota vehicles, this battery hold down bracket adopts 16-gauge steel with premium thermosetting powder coating. It features high hardness, great deformation and wear resistance, effectively resisting rust and harsh road conditions. Durable enough to reduce frequent replacement and save maintenance costs.
- Secure Battery Fixation & Driving Safety: This battery hold down kit firmly fixes your car battery in place. It effectively prevents battery shaking, sliding and displacement during daily driving and bumpy rides, stabilizing the vehicle’s electrical system and avoiding potential driving risks.
- Quick & Tool-Free Installation: Equipped with rust-resistant 304 stainless steel J-hooks and flange nuts for easy installation. Simply thread the J-hook through the mounting hole and fasten the nut from below. No drilling or extra tools required for fast, hassle-free assembly.
This product presentation was made with AAWP plugin.