NHTSA ID Number: 10144875
Manufacturer Communication Number: 07-139-18R
Summary
This bulletin outlines a design change made to the inner lens extension portion of the LED headlamp assembly. Under the right conditions, the shape of the lens for the actual head lamp light source can cause sunlight to be focused onto the extension portion of the lens resulting in deformation. A heat-resistant shade has been added to protect the affected area.
8 Affected Products
Vehicles
INTRODUCTION:
This bulletin outlines a design change made to the inner lens extension portion of the LED headlamp assembly. Under the right conditions, the shape of the lens for the actual head lamp light source can cause sunlight to be focused onto the extension portion of the lens resulting in deformation. A heat-resistant shade has been added to protect the affected area.
PRODUCTION CHANGE INFORMATION:
The new headlamp assemblies were incorporated into production starting with VIN J9839581.
PART INFORMATION:
| Description | Part Number | Applicability |
| LENS AND BODY- HEAD LAMP RIGHT | 84913VA321 | 2018MY WRX and WRX STI (exc. RA model) |
| LENS AND BODY- HEAD LAMP LEFT | 84913VA331 | |
| LAMP ASSEMBLY- HEAD RIGHT | 84002VA261 | |
| LAMP ASSEMBLY- HEAD LEFT | 84002VA271 |
The images below show the affected area of the lens where the deformation can occur along with a comparison between the new style lamp with the shade added and the original.
IMPORTANT NOTE: When replacing affected assemblies under Warranty, the “Lens and Body” part numbers must be used for the repair NOT the complete assemblies.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
IMPORTANT: When either headlamp is confirmed to have the described condition, BOTH left and right must be replaced as a set.
The service procedures for headlamp replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
SEOCONTENT-START
APPLICABILITY: 2015-2018MY WRX and WRX STI
SUBJECT: LED Headlamp Deformation -Design Change
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period, this repair may be submitted using the following claim information:
| Labor Description | Labor Operation # | Labor Time | Fail Code |
| BOTH HEADLAMP ASSEMBLIES R&R | A916-144 | 0.6 | XFU-10 |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 07-139-18; Revised: 08/24/18 Page 2 of 2
SEOCONTENT-END
NUMBER: 07-139-18R
DATE: 08/09/18
REVISED: 08/24/18
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs:Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business,Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind
- Verify fitment: Navigate to the Amazon Confirmed Fit tool at the top of the page (desktop) or under the images (mobile). Plug in your vehicle info and check the bulb fitment location to ensure this product will work for your needs
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs
- Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- Longer Life Than Most Standard Bulbs: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- Outstanding Brightness: Using high quality SMD 3030 chip to provide 360-degree dead-angle-free illumination with high brightness and no glare, this 194 led bulb features a high-precision fiber glass circuit board that dissipates heat quickly and ensures a long service time of 20,000 hours, providing safety for night driving
- Plug and Play: With a plug-and-play design and the same size as a halogen bulb, this license plate bulb is easy to install without additional tools or decoders. It features a built-in constant IC driver to avoid CANBUS errors and is suitable for both interior and exterior lighting, providing a bright and clear view
- Ideal Replacement: As an ideal replacement for T10 wedge types, this led 194 bulb is compatible with a wide range of bulb types, including t10, 194, 168, 921, 147, 152, 158, 159, 161, 168, 175, 192, 193, 184, 259, 280, 285, 447, 464, 501, 555, 558, 585, 655, 656, 657, 1250, 1251, 1252, 2450, 2652, 2921, 504, 2821, 2825, 2827, 12256, 12961, m158, m155, 3652ll, 194nall, 194st, pc175, 168a, 194ll, 2886x, 175, pc195, 658, 912, W5W
- Waterproof Design: With excellent waterproof performance and the ability to work even in rain or snow, these led license plate light bulbs are available in a variety of colors: white, ice blue, yellow, pink purple, red, blue, green. A pack of 30 bulbs is more than enough for your use and replacement requirements
- Widely Used: Measuring 0.94 inches in length, 0.35 inches in bulb diameter, and with a mounting portion of approximately 0.31 inches, this 194 bulb is suitable for a wide range of 12V vehicles. It can be widely used for license plate light, dome light, map light, turn signal light, parking light, grocery box light, reading light, door light, and more
- Product Includes: 42PCS LED interior car lights in 6 different sizes, including T10, 31mm, 36mm, 41mm, and other sizes, to meet various needs for car interior lighting.
- Versatile Applications: These LED interior lights can be used in multiple positions in your car, including dome lights, map lights, license plate lights, glove box lights, and trunk lights, providing a modern and stylish lighting upgrade for your vehicle.
- Easy Installation: Designed for plug-and-play installation, with the correct polarity of the electrode, it is easy to replace the old bulb.
- Energy-efficient: These car LED lights interior are made with durable materials and feature energy-saving LED chips, ensuring stable and efficient lighting performance for enhanced visibility in your vehicle.
- Wide Compatibility: Compatible with various socket types, such as T10, DE3175, 194, 168, and more, these LED bulbs are suitable for most cars, trucks, SUVs, and other vehicles. Please ensure to carefully check the size of your socket before ordering.
This product presentation was made with AAWP plugin.