NHTSA ID Number: 10171950
Manufacturer Communication Number: 07-169-20
Summary
This Service Information bulletin describes a change made to the labels applied to the push to start switches used on the models listed.
31 Affected Products
Vehicles
| SUBARU | ASCENT | 2019 |
| SUBARU | BRZ | 2016-2020 |
| SUBARU | CROSSTREK | 2013-2020 |
| SUBARU | IMPREZA | 2012-2020 |
| SUBARU | LEGACY | 2013 |
| SUBARU | OUTBACK | 2013 |
| SUBARU | WRX | 2015-2020 |
NUMBER: 07-169-20
DATE: 02/21/20
| APPLICABILITY: | 2013MY Legacy and Outback 2014-20MY Forester 2012-20MY Impreza 2013-20MY Crosstrek 2015-20MY WRX 2016-20MY BRZ 2019MY Ascent |
| SUBJECT: | Push Button Start Switch- Label Change |
INTRODUCTION:
This Service Information bulletin describes a change made to the labels applied to the push to start switches used on the models listed above. There has been NO change made to the operation or functionality of the switches. The label change was made for compliance reasons in the Indonesia, Argentina and China markets.
PART INFORMATION:
The part number switches listed below include the new labels. Any changes identified between the OLD and NEW part labels can be disregarded.
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
| 83031FL001 | 83031FJ005 |
| 83031FL00B | 83031VA001 |
| 83031VA011 | 83031FJ011 |
| 83031CA005 | 83031CA024 |
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Service procedures for switch replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
NUMBER: 07-169-20
DATE: 02/21/20
Bestseller No. 1
X660000530 Stop Switch fits for Robin Subaru Motor Engine Start On Off Kill X66-00005-20 058-121 066-00004-71 EX13 EX17 EX21 EX27 EX30
- Fits models:EH092D50001,EH092D50010,EH092D50011,EH092D47060,EH092D50000，EH092D00051
- Fits models:EH092D40011,EH092D40020,EH092D47000,EH092D47020,EH092D47030,EH092D47040
- Fits models:EH092D00020,EH092D00021,EH092D00030,EH092D00040,EH092D00041,EH092D00050
- Fits models:EH092D00060,EH092D00070,EH092D10000,EH092D10001,EH092D10010,EH092D20030
- Fits Robin Subar : EY15, EY20 (5HP), EX13 EX17 EX21 EX27 EX30 EX35 EX40 EH36 EH41 Engine Series
Bestseller No. 2
Auto Start Stop Engine System Eliminator for Subaru Forester 5th Gen 2019UP
- Works and compatible with Subaru Forester 5th Gen (SK) 2019 2020 2021 2022 2023, plug and play, no error code after install, won't effect any other function
- Why should install this Eliminator device? Because "Auto start stop" will cause the air conditioner not run smoothly and it will accelerate the aging of the spark plug, frequent start and stop will seriously shortening the battery's service life
- Function: after installation,restart your car,the A-OFF button will automatically turn on,you don't have to manually turn on the stop engine function every time,if you want the auto-off function work again,just press the A-OFF button to reactivate it
- Installation: this cable is installed in-between the Auto Start Stop switch and the vehicle wiring harness to disable the auto start stop function, just remove the central control panel of A-OFF button and connect the two ends with this cable
- Important note: does not work with the car without "A OFF" button which means the car doesn’t have the automatic start-stop system,and the video is only a reference for installation thinking (you could find the disassembly method on Google / YouTube)
Bestseller No. 3
vocsvok Auto Start Stop Eliminator for Subaru Forester 2019 2020 2021 2022 2023 2024,Autostop Eliminator/Disable/Delete/Disabler Accessories ESS Engine
- Perfect Fit for Subaru Forester 2019-2024 Specifically designed for the 5th Gen Subaru Forester (SK) from 2019 to 2024 . This eliminator connects seamlessly between the A-OFF switch and the vehicle harness, ensuring full plug-and-play compatibility without triggering error codes or affecting any other electronic functions.
- Easy Plug-and-Play Installation No wiring cuts or programming needed. Simply remove the center control panel around the A-OFF button, connect the adapter cable between the original switch and vehicle harness, and reassemble. Within 3 seconds of starting the car, the A-OFF button backlight turns amber, confirming successful installation.
- Smart Memory Function Once installed, the system automatically disables the auto start-stop function every time you start your vehicle—no need to manually press the A-OFF button again. If you wish to temporarily reactivate the feature, a simple press of the A-OFF button restores it immediately.
- Protects Your Engine & Key Components Frequent engine restarts accelerate wear on the battery, starter, and spark plugs. By eliminating unnecessary start-stop cycles, this device helps extend the life of vital components, ensures smoother air conditioner operation, and enhances overall driving comfort.
- Durable & High-Temperature Resistant Made from high-quality, flame-retardant plastic with high-purity copper wiring for optimal conductivity. The durable wire loom provides extra protection, ensuring reliable performance and long-term durability even in high-temperature engine environments.
Bestseller No. 4
SaleBestseller No. 5
Auto Start Stop Eliminator Fit for 2019-2024 Subaru Forester 5th Gen Parts
- AUTO START STOP ELIMINATOR: Auto start stop eliminator features a high-quality flame-retardant housing and wire harness sheath, incorporating high-purity copper wiring for superior heat resistance and anti-aging properties. Its compact design resolves issues related to wire harness strain and loosening, while ensuring that it does not trigger any fault codes or interfere with any other electronic functions. You will receive one auto start-stop eliminator unit and one pry bar tool.
- COMPATIBLE MODELS: Auto start/stop eliminator is specifically designed for the 5th Generation Subaru Forester (2019–2024 models). It is compatible with vehicles equipped with the "A-OFF" button, connecting seamlessly between the "A-OFF" switch and the vehicle's existing wiring harness. The auto start/stop eliminator promotes more stable vehicle operation under most daily driving conditions, resulting in a smoother and more controllable driving experience.
- PLUG-AND-PLAY INSTALLATION: Auto start/stop eliminator requires no wire cutting and no programming. Simply remove the center console panel surrounding the "A-OFF" button, connect the adapter cable between the switch and the vehicle's wiring harness, and then reassemble the panel. Within 3 seconds of starting the vehicle, the backlight on the "A-OFF" button will change color, confirming that the installation is complete. Start-stop system canceler is easy to install and occupies minimal space.
- ENGINE START SYSTEM PROTECTION: By eliminating unnecessary start-stop cycles, this device helps extend the lifespan of critical engine components, ensures smoother operation of the air conditioning system, and enhances overall driving comfort. The auto stop eliminator helps mitigate issues such as premature wear on spark plugs, unstable AC performance, and the significant strain placed on the vehicle's battery—which can shorten its lifespan—caused by frequent start-stop operations.
- ONE-TOUCH TOGGLE: Once installed, the system will automatically disable the auto start/stop function every time you start the vehicle—eliminating the need for you to manually press the "A-OFF" button. If you wish to temporarily re-enable the function, simply press the "A-OFF" button once to instantly restore it. If you have any questions regarding the Auto Start-Stop Eliminator, please feel free to contact us at any time.
This product presentation was made with AAWP plugin.