Subaru Accessory Installation Guide
/
Installation instructions
Instructions d’installatiion
Part number:
Numéro de piéce:
H501SVA000 / H501SVA100
Vehicle:
Véhicule:
Description: Auto dimming mirror
Description: Tetroviseur antieblouissement
1
Disconnect battery. If equipped disconnect eyelet cable only.
Déconnectez la batterie. Si elle en est équipée, déconnectez le câble de l’oeillet uniquement.
2
Twist mirror base cover and pull cover away from windshield.
Par un mouvement de torsion, décrochez la coquille du pied du rétroviseur et éloignez-la du pare-brise
3
1 – Pull tab away from windshield. 2 – While holding tab, gently slide mirror up and off of windshield mirror mount.
1 – Tirez la languette à l’opposé du pare-brise. 2 – Tout en retenant la languette, glissez doucement le rétroviseur vers le haut pour l’enlever de son pied.
4
1 – Warning: Do not touch Eyesight camera lens. 2 – Place protective tape (a) to stereo camera cover assembly as shown.
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Placez une bande de protection adhésive (a) sur le boîtier de la caméra stéréo, comme il est illustré.
5
1 – Warning: Do not touch Eyesight camera lens. 2 – Using panel removal tool, pry cap at locations shown. 3 – Remove the stereo camera cover.
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Au moyen de l’outil de dépose du panneau, décollez le boîtier aux endroits illustrés. 3 – Enlevez le boîtier de la caméra stéréo.
6
1 – Warning: Do not touch Eyesight camera lens. 2 – Remove 2 bolts.
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Enlevez deux boulons.
7
1 – Warning: Do not touch Eyesight camera lens. 2 – Pull down on stereo camera overhead at locations (2) shown to disconnect clips. 3 – Then slide overhead forward slightly and remove at location (3).
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Tirez le dessus de la caméra stéréo vers le bas aux points indiqués (2) pour dégager les attaches. 3 – Faites glisser le dessus légèrement vers l’avant et détachez la caméra au point 3.
8
1 – Remove lens. 2 – Remove screws. 3 – Remove overhead console.
1 – Enlevez la lentgille. 2 – Enlevez les vis. 3 – Enlevez la console au pavillon.
9
Slide auto dimming mirror onto windshield mount.
Glissez le rétroviseur auto-assombrissant sur son pied de pare-brise.
10
Tighten Torx set screw to 13.3 – 17.7 in-lbs.
Serrez la vis de blocage Torx à 13,3 – 17,7 lb-po.
11
1 – Feed wire harness between roof trim panel and roof.
1 – Faites passer le faisceau entre le pavillon et le toit.
12
Connect to wire harness. Connect other end of wire harness to auto dimming mirror.
Branchezle the wiring harness. Branchez l’autre extrémité du faisceau au rétroviseur autoassombrissant.
13
1 – Warning: Do not touch Eyesight camera lens. 2 – Route wire harness above stereo camera assembly as shown and connect to pre-arranged vehicle connector. 3 – Ensure wire harness is routed away from mounting hole. 4 – Feed wire harness between roof trim panel and roof.
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Faites passer le faisceau de câblage au-dessus de la caméra stéréo comme il est illustré et branchez-le au connecteur déjà installé dans le véhicule. 3 – Assurez-vous que le faisceau de câblage passe à bonne distance de l’orifi ce de montage. 4 – Faites passer le faisceau entre le pavillon et le toit.
14
1 – Place the wire harness into open clip on headliner brace.
2 – Secure wire harness with wire tie. Trim excess wire tie.
1 – Placez le faisceau de câblage dans la bride de fi xation ouverte du renfort du pavillon.
2 – Fixez le faisceau de câblage à l’aide de l’attache autobloquante. Coupez l’excédent de l’attache autobloquante.
15
1 – Warning: Do not touch Eyesight camera lens. 2 – Reinstall stereo camera overhead. 3 – Warning: Ensure wire harness is routed away from mounting hole. Tighten bolts to 4 +/- 0.5 ft-lbs.
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Reposez la caméra stéréo. 3 – Avertissement: Assurez-vous que le faisceau de câblage passe à bonne distance de l’orifi ce de montage. Serrez les boulons à 4 +/- 0,5 lb-pi.
16
1 – Warning: Do not touch Eyesight camera lens. 2 – Reinstall stereo camera cover. 3 – Remove tape from stereo camera cover.
1 – Avertissement : Ne touchez pas à la lentille de la caméra EyeSight. 2 – Reposez le boîtier de la caméra stéréo. 3 – Enlevez la bande de protection adhésive du boîtier de la caméra stéréo.
17
1 – Install overhead console. 2 – Tighten screws. 3 – Install lens.
1 – Posez la console au pavillon. 2 – Serrez les vis. 3 – Posez les lentilles.
18
1 – Install wire harness cover onto mirror. 2 – Extend wire harness cover to fi t snug against roof trim.
1 – Posez le couvre-faisceau sur le rétroviseur. 2 – Tirez le couvre-faisceau jusqu’au pavillon pour faire disparaître l’interstice.
19
Leave 3 – 4” of wire harness to allow for mirror adjustment.
Laissez 3 à 4 po de faisceau pour permettre le réglage du rétroviseur.
20
Reconnect battery. If equipped reconnect eyelet cable.
Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’oeillet.
21
Using dark cloth or cardboard, completely cover forward-looking sensor.
Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant.
22
To calibrate compass reference mirror user guide.
Pour étalonne la boussole, reportez-vous au manuel du rétroviseur.
PART NUMBERS
H501SVA000
H501SVA100
ISSUE
A
DATE
4/26/16
- 1.【4.3-inch screen】: Our car rearview mirror display is a 4.3-inch color screen with a resolution of 480*272 and a 16:9 display format; the brightness of 500 cd/m2 ensures clear visibility even in bright sunlight.
- 2.【Auto-dimming function】: The HD is equipped with an automatic dimming function, which can adjust the brightness according to the ambient light conditions and automatically turn on the rearview camera screen when reversing. With an accurate distance scale line display, it can park and reverse correctly, making parking and reversing more convenient and .
- 3.【ABS shell】Our interior rear view mirror made of high-quality and materials. ABS shell, not only ensures its service life, but also adds a stylish and modern feel to your car interior.
- 4.【Practicality】Our 4.3-inch rearview mirror automatic dimming display is designed to provide high-definition and automatic dimming reversing images, solving the problem of poor rearview effect of the car and ensuring a safer parking and reversing experience.
- 5. 【Package List】The package contains 1 car rearview mirror monitor, 1 video cable and power cable, 1 extra cable cover, 1 English manual, 1 bracket and 5 screws, providing everything you need for easy and worry- installation.
- UPGRADED 4K UHD CLARITY - Experience stunning detail with the front camera's upgrade to 4K UHD (2160p) resolution, paired with a 1080p rear camera. The extra-large 12" display provides 1.5 times the viewing area of a standard mirror, significantly reducing blind spots for enhanced safety.
- 5.8GHz WiFi&GPS TRACKING - The included external GPS antenna enables real-time GPS data display directly on the dash cam. Connect to your phone via Wi-Fi and use the "WOLFBOX" app on iOS or Android devices to real-time viewing, playback recordings, and quick sharing of videos.
- LARGER SCREEN & WIDER VIEW - The WOLFBOX G840S mirror camera features a 170° front lens and a 140° rear lens, offering a broader field of view to minimize blind spots during driving and reversing. The smart split-screen function allows simultaneous monitoring of both lenses, while the 2.5D curved screen seamlessly integrates with your vehicle’s interior.
- SUPERIOR NIGHT VISION & IMAGE QUALITY - The G840S mirror dash camera is equipped with an upgraded low-reflectivity LCD to reduce daytime reflections. With incorporated WDR & HDR technology for balanced lighting, and a professional-grade sensor paired with a 6-glass lens for superior image quality, nighttime driving or challenging lighting conditions are handled with ease.
- 24-HOUR PARKING MONITOR - Beyond on-the-road safety with loop recording, the WOLFBOX camera also features a 24-hour parking monitor. Time-lapse mode records at a low frame rate to conserve power and storage while ensuring continuous surveillance of your vehicle. (A hardwire kit is required for parking monitoring.)
- AUTO_DIMMING: Automatically darkens to eliminate glare
- FRAMELESS DESIGN: Enhanced aesthetics to complement any vehicle interior
- CAR_TO_HOME AUTOMATION: Control garage doors, gates, home lighting, and more
- INTEGRATED HOMELINK 5: 99% compatibility with garage door openers and security gates
- COMPATIBILITY: Compatible with any wedge mount vehicle along with others using adapters (GENMM1, GENMM2, GENMM3)
- Auto-Dimming
- Homelink integration
- Enhanced Wide-Angle View: Experience a panoramic view with the Verivue Mirrors 12-inch clip-on rearview mirror, perfect for eliminating blind spots and ensuring safet drive
- Anti-Glare Technology: Designed with a clear tint, this rearview mirror minimizes glare during both day and night driving, making your journey comfortable.
- Universal Compatibility: This rear view mirror fits most cars, SUVs, and trucks, making it a versatile accessory for improved visibility.
- Perfect for Baby Monitoring: Ideal for parents with rear-facing car seats, this mirror provides a clear view of your baby, enhancing safety and peace of mind.
- Premium Quality and Easy Installation: Made from durable materials, this mirror securely clips onto your existing rearview mirror in seconds without tools.
Last update on 2026-06-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.