NHTSA ID Number: 10153622
Manufacturer Communication Number: 07-144-18
Summary
This bulletin announces a change made to the assembly process of the rear combination lamps to enhance the seal between the lens and body. This change optimizes the lamp’s water resistance by using advanced lens sealing and plastic welding processes during assembly. (Crosstrek Hybrid)
3 Affected Products
Vehicle
| SUBARU | CROSSTREK | 2014-2016 |
NUMBER: 07-144-18
DATE: 12/20/18
| APPLICABILITY: | 2014-16MY Crosstrek Hybrid (HEV) |
| SUBJECT: | Tail Lamp (Rear Combination Lamp) Assembly Procedure Change |
INTRODUCTION:
This bulletin announces a change made to the assembly process of the rear combination lamps to enhance the seal between the lens and body. This change optimizes the lamp’s water resistance by using advanced lens sealing and plastic welding processes during assembly.
PART INFORMATION:
The combination lamp part numbers are unchanged.
| Description | Part Number |
| LENS & BODY-REAR COMBINATION LAMP -RIGHT | 84912FJ321 |
| LENS & BODY-REAR COMBINATION LAMP -LEFT | 84912FJ331 |
The new lamps are identified by a Lot Number printed on the underside of the housing as shown in the photos below. In the photo below, HM12 is the Lot Number which translates to October 12, 2018.
- H = Model Year (Alpha 1)
- M = Production Month (Alpha 2)
- 12 = Day of Production Month
IMPORTANT: The starting Lot Number for new combination lamps is: HM16 (October 16, 2018 and after).
Use these tables to translate Lot Numbers and determine between “OLD” and “NEW” tail lamp assemblies:
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
If moisture is found inside one combination lamp, replace the affected lamp assembly. There is no need to replace both as a set. The service procedure for replacement remains unchanged. Always refer to the applicable Service Manual and review all requirements of the repair being performed. Service Manual procedures contain information critical to performing an effective repair the first time, every time.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period, this repair may be submitted using the following claim information:
| Labor Description | Labor Operation # | Labor Time | Fail Code |
| REAR COMBINATION LAMP R&R ONE SIDE | B916-201 | 0.2 | XCB-29 |
| REAR COMBINATION LAMP R&R BOTH SIDES | B916-204 | 0.3 |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
NUMBER: 07-144-18
DATE: 12/20/18
- Fitment: Replacement for Forester 2014-2016
- Well Sealed Construction: Weather-sealed housing to avoids vapor intrusion, performance tested for poor weathers
- More Securely Driving: Tail light allow your car to be seen from a greater distance, at night or in bad weather, helping the driver behind you to know where you are, greatly improve the reaction speed of the other driver, increase securely driving
- Materials: The product is made of good materials and undergoes rigorous testing to ensure structural strength and integrity
- Easy to Install: Plug and Play. Direct replacement of the original parts. Professional installation is recommended for the functionality
- Applicable Models: Tail light replacement for Subaru Crosstrek 2018-2019 Subaru Impreza Hatchback Wagon 2017-2019
- Part Number: Replacement for 84201FL03A SU2804109
- Enhance Driving Secure: The tail light provide better nighttime visibility. At night, you can let other people judge your vehicle width farther away. If you often drive on unlit roads, this may mean a major improvement in secure
- Lens: With the bright lights, enhance visibility during night time, heavy rain, snow, or dense fog. Reduce the occurrence of traffic accidents
- Installation: Plug and play installation. No installation guide or instruction included, professional installation is highly recommended
- 【Perfect Fit & Easy Installation】 These LED tail lights offer a direct OEM replacement with a plug-and-play design—no wiring modifications needed. Ensures seamless compatibility and hassle-free installation
- 【Superior Brightness & Safety】 Equipped with high-intensity LED light bar, 360 enhances visibility and improves driving safety at night. It is as bright as factory taillights and meets DOT/SAE road legality certification.
- 【Reliable & Weatherproof Construction】 Built with IP67 waterproof rating and UV-resistant ABS housing, these tail lights withstand extreme weather, mud, and vibrations. Ideal for rugged Outback off-road adventures.
- 【Check vehicle type adaptability】 This taillight Compatible With 2020-2024 Subaru Outback . OE: 84201AN02B SU2805113
- 【Package list】 Right Passenger Side Taillight Assembly *1PC
- Applicable Models - Tail light compatible with 2015 2016 2017 2018 2019 Outback, This tail light has extremely high compatibility and is unlikely to cause installation conflicts
- Superior Quality - Tail lamps have to withstand a variety of complex conditions, and can work stably in different climatic conditions. In the hot summer, it will not cause deformation of the lampshade and circuit failure due to high temperature, and in the cold winter, it can be lit quickly without being affected by low temperature
- Good Performance - This light bulb has a higher brightness. During the night or in bad weather conditions such as heavy rain or thick fog, it can provide a farther and clearer warning effect, significantly reducing the frequency and hassle of replacing the bulb in the future, and at the same time greatly enhancing the safety of your nighttime travel
- Easy Installation - This tail light is designed to be a direct replacement for the tail light on your vehicle with plug-in wiring, you don't need to make any complicated modifications to your vehicle's wiring, just connect the plug of the new tail light to the corresponding socket on your vehicle accurately and then fix the tail light in the correct position, the whole installation process is complete
- Substitute Part Number - Left: 84912AL06A-PFM 14496430. It fits closely to the vehicle body, harmonizes with the overall appearance of the vehicle after installation, and is not prone to excessive gaps or insecure installation
- Superior Quality - The products are made of superior quality materials, robust to withstand a variety of harsh weather and complex road conditions to ensure stability and integrity
- Applicable Models - Rear tail light assembly compatible with 2017 2018 Forester. Please check whether the model and product pictures are consistent before placing another order to avoid purchase errors
- Substitute Part Number - Driver side: 84912SG151 SU2818109. Our tail lights are brighter, which can better warn the vehicles behind and enhance the safety of driving
- Easy Installation - With a user-friendly design, our rear brake tail light can be easily installed without any hassle. If you are not familiar with the installation of the rear taillight, it is recommended that you find a professional to install it for you so as not to cause unnecessary trouble
- Design Rationality - The design of the rear taillight is coordinated with the overall shape of the vehicle, in line with the principle of aerodynamics, with aesthetics and practicality, so as to enhance the overall sense of quality and grade of the vehicle
This product presentation was made with AAWP plugin.