Accessory Installation Guide
| Thule 2” Hitch Adapter
Applicability: | SOA567H011 |
SEOCONTENT-START506-7400 1
Please read this manual and
follow the instructions carefully.
To emphasize important
information, the symbol and
words: CAUTION and
NOTE have been used.
Pay particular attention to
the message highlighted
by these signal words.
NOTE: Indicates special
information to make
maintenance easier or
instructions clearer.
Veuillez lire attentivement
et respecter ce mode
d’emploi et ses instructions.
Les symboles et les mots
ATTENTION et
REMARQUE sont
particulièrement importants
et mettent en évidence les
informations qui requièrent
votre attention.
REMARQUE : Donne des
informations spécifiques pour
faciliter la maintenance
ou clarifier les instructions.
EN INSTALLATION INSTRUCTIONS
FR MANUEL D’INSTALLATION
ES INSTRUCCIONES DE INSTALACIÓN
Description / Description / Descripción
Application / Application / Aplicación
Part Number / Référence produit / Número de pieza
2″ Adapter Kit
Thule Bike Carriers
SOA567H011
Contents
Contenu
Contenido
x4
x1
x2
EN FR ES Lea este manual y siga las
instrucciones atentamente.
Para enfatizar la presencia
deinformación importante,
se utilizaron los siguientes
términos: PRECAUCIÓN
y NOTA. Preste particular
atención a los mensajes
destacados con estos dos
términos.
NOTA: Indica información
especial para facilitar las
tareas de mantenimiento o
aclarar las instrucciones.
Indicates potential hazard that could
result in vehicle damage.
Indique les dangers potentiels pouvant
endommager le véhicule.
Indica peligro potencial que podría resultar
en daños en el vehículo.
Important
Important
Importante
CAUTION
Use:
Usage:
Uso:
2 506-7400
4Nm
x2
x2
x1
EN Install one M6 Flat Head Screw in
each aluminum bracket – align holes
in adapter with holes in stinger.
Tighten to 4NM (2.9 ft lbs).
FR Installez une vis à tête plate M6 dans
chaque support en aluminium – alignez
les trous de l’adaptateur avec les trous
du support. Serrez à 4 NM (2.9 ft lbs).
ES Instale un tornillo de cabeza plana M6
en cada abrazadera de aluminio: alinee
los orificios en el adaptador con los
orificios en la espiga. Aplique un par
de apriete de 4 NM (2.9 ft lbs).
4Nm
x4
x1
EN Install two M6 Flat Head Screws in
each aluminum bracket – align holes
in adapter with holes in stinger.
Tighten to 4NM (2.9 ft lbs).
FR Installez deux vis à tête plate M6 dans
chaque support en aluminium – alignez
les trous de l’adaptateur avec les trous
du support. Serrez à 4 NM (2.9 ft lbs).
ES Instale dos tornillos de cabeza plana
M6 en en cada abrazadera de aluminio:
alinee los orificios en el adaptador con
los orificios en la espiga. Aplique un
par de apriete de 4 NM (2.9 ft lbs).
Thule Inc. • 42 Silvermine Road • Seymour, CT 06483
Thule Canada Inc. • 710 Bernard • Granby QC J2J 0H6
North American Consumer Service: Toll Free 800-238-2388 / Fax 450-777-3615 • www.thule.com
Register online at
www.thule.com/warranty
Assembly
Option 1
Option
d’assemblage 1
Opción de
montaje 1
x2
Assembly
Option 2
Option
d’assemblage 2
Opción de
montaje 2
Installation
Installation
Instalación
SEOCONTENT-END
- Patented Design Fits Sedans, Hatchbacks, Minivans, And Suv'S Consult Manufacturer Web Site For Specific Vehicle Fit Information.Comes fully assembled set up and installs in seconds 12 inch long carry arms easily accommodate a wide range of bicycle styles and 115 inch wide carry arms for greater bike compatibilityShips in certified frustration free packaging 70 pounds max capacityFolds fully flat for easy storage.Allen's warranty does not cover items purchased through third-party sellersImportant, please consult manufacturer web page for specific vehicle fit.Target gender : unisex.
- Side Straps For Increased Lateral Stability. Single Configuration Design Eliminates Setup Hassles And Headaches During Installation
- Individual Tie Downs Secure And Protect Bicycles
- Padded Lower Frame Keeps Bicycles Away From Vehicle
- Comes fully assembled set up and installs in seconds 12 inch long carry arms easily accommodate a wide range of bicycle styles and 115 inch wide carry arms for greater bike compatibility
- Features. Hitch insert fits 2-in receiver hitches. Patented tie-down cradle system individually secures and protects bicycles.
- Carry arms fold out of the way when not in use. Rack tilts back for easy lift-gate access. No-wobble bolt eliminates movement of rack inside of hitch.
- All retainer clips attached with lanyards to prevent lost parts. Minor assembly required. Black powder-coated finish.
- Enhanced Durability: This bike rack is equipped with a hitch adapter to fit standard 1-1/4" and 2" hitch receivers, ensuring broad compatibility
- Versatile Hitch Compatibility: Designed to be used on Class I, II, III, and IV hitches, this bike rack is adaptable and suitable for various types of vehicles
- Secure Bike Transportation: Transport up to 2 bikes securely with the improved rubber bike cradles and buckle-type straps. These features allow your bikes to remain stable during travel
- Sturdy Design: The built-in locking knob keeps the main upright sturdy, minimizing wobble and enhancing stability while on the move
- Weight Capacity: The rack supports a maximum capacity of 100 lbs, with a limit of 50 lbs per bike. This ensures safe and reliable bike transportation
- 200LBS CAPACITY & V-GROOVE RAMP: The electric bike rack weighing 66 pounds is built with durable steel and aluminum for long-lasting durability. Fits tires up to 5" wide and wheelbases up to 50". The ebike rack features 200lbs weight capacity in total (100lbs per bike), such as mountain bikes, standard bikes, ebikes weighing less than 100lbs
- PATENTED ANTI-WOBBLE & ENHANCED GRIP: Our tow mount electric bike rack has a patented V-shape cradle and bolt system to ensure fat tire stability. Shock-absorbing hitch threads ensure stability, while upgraded semi-enclosed connection blocks on support bars provide a stronger grip, firmly securing the e-bikes and preventing it from striking the car's rear door during transport
- SCRATCH-RESISTANT & EASY INSTALLATION: Instead of the metal hook, Young Electric ebike rack uses a ratchet strap system at three points per bike for stability, with soft padding and rubber covers to prevent scratches. Easy installation with the manual or E-manual
- FOLDABLE & ANTI-RUST: Made of lightweight aluminum and steel, our foldable bike rack hitch mount is easy to store and transport. A 1000-hour salt spray resistance coating prevents rust, making it weatherproof. The ramp can be easily installed on the electric bike rack. After use, please store the ramp in your car
- Manufacturer Direct: Our ebike rack features 2 bars per electric bike or bike for added support and stability. Enjoy a 1-year warranty and easy setup with detailed instructions and 24/7 support
- 🚴【HEAVY-DUTY CONSTURCTION】: Built with high-strength alloy steel to support up to 180 lbs, accommodating two bikes of various sizes and types, including eBikes, mountain bikes, and road bikes.
- 🚴【EASY ASSEMBLY & INSTALLATION】: Simple assembly with minimal tools required. The rack can be installed and removed quickly and effortlessly. Compatible with standard 2-inch hitch receivers, fitting most cars, SUVs, and trucks.
- 🚴【TILT-DOWN FEATURE】: Convenient tilt-down mechanism allows for easy access to the rear of the vehicle without removing the bikes.
- 🚴【FOLDABLE DESIGN】: When not in use, the rack folds up neatly against the vehicle to save space and avoid interference.
- 🚴【ATTENTION】:MAKE SURE THE HOOKS ARE PRESSED DOWN FIRMLY AND ALWAYS USE STRAPS TO SECURE THE BIKE.
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.