Brembo Brake Calipers- Special Servicing – 2004-2020 Subaru WRX & WRX STI & 2013-2020 BRZ

NHTSA ID Number: 10176028

Manufacturer Communication Number: 06-76-20

Summary

This service Information bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed. Because of their aluminum construction, it is critical to take extra care when servicing.

 


NUMBER: 06-76-20
DATE: 05/26/20

APPLICABILITY:2004-20MY WRXeBay logo and WRXeBay logo STIeBay logo
2013-20MY BRZ
SUBJECT:Brembo Brake Calipers- Special Servicing

 

INTRODUCTION:

This Service Information Bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed above.  Because of their aluminum construction, it is CRITICAL to take extra care when servicing.

 

PART INFORMATION:

IMPORTANT REMINDER: When needed, always order the most up-to-date replacement hardware based on the specific VIN being repaired.  This is especially important for the caliper bolts referenced below as different bolts are used for different model years.

 

SERVICE PROCEDURE / INFORMATION:

REMINDER:  Customer satisfaction and retention starts with performing quality repairs. The service procedures for brake caliper removal and installation remain unchanged.  Additional precautions to follow are supplied below.  Always refer to the applicable Service Manual and review the full requirements of the repair being performed.  The Service Manual procedures contain information critical to performing an effective repair the first time and every time.  This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.

  • When caliper assembly removal is necessary, it is CRITICAL to inspect the threads of the retaining bolts closely before reinstallation. If inspection reveals the surface coating of the bolt threads is peeling or otherwise damaged, the affected bolt(s) MUST be replaced to prevent damaging the threads in the aluminum caliper body as shown in the example photos below.

 

NOTE:  If the mounting bolt threads in the caliper are damaged, the caliper assembly must be replaced.

 

  • When re-mounting the calipers, tighten both retaining bolts CAREFULLY BY HAND and EVENLY until the underside of the bolt heads bottom against the bracket. Once both bolts are fully installed against the mounting bracket, proceed with final torqueing to the specified values as listed in the applicable Service Manual.

NOTE:  Additional Brembo-specific disc brake servicing procedures and precautions relating to brake hose replacement are supplied in TSB 06-64-18.

 

IMPORTANT REMINDERS:

  • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
  • Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
  • Always refer to STIS for the latest service information before performing any repairs.

 


40 Affected Products

Vehicles

MAKEMODELYEAR
SUBARUeBay logoBRZ2013-2020
SUBARUeBay logoWRXeBay logo2004-2020
SUBARUeBay logoWRXeBay logo STIeBay logo2004-2005, 2008-2020

 


1 Associated Document

Manufacturer Communications

NUMBER: 06-76-20
DATE: 05/26/20

https://www.nhtsa.gov/recalls?nhtsaId=10176028

MC-10176028-0001.pdf 1125.834KB

 


 

SaleBestseller No. 1
Brembo P54039N Premium Ceramic Front Disc Brake Pad Set DODGE/HOLDEN/MITSUBISHI/SUBARU OE# 26296FE100
  • PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
  • MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
  • FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
  • EASY INSTALLATION: All required hardware needed for installation is included in the box
  • ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
SaleBestseller No. 2
Brembo P56048N Premium Ceramic Rear Disc Brake Pad Set MASERATI/MITSUBISHI/NISSAN/SUBARU/TOYOTA OE# 4605A050
  • PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
  • MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
  • FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
  • EASY INSTALLATION: All required hardware needed for installation is included in the box
  • ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
SaleBestseller No. 3
Brembo P78021N Premium Ceramic Front Disc Brake Pad Set SUBARU/TOYOTA OE# 26296SC010
  • PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
  • MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
  • FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
  • EASY INSTALLATION: All required hardware needed for installation is included in the box
  • ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
Bestseller No. 4
Brembo P78017N Premium Ceramic Front Disc Brake Pad Set SUBARU OE# 26296AJ001
  • PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
  • MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
  • FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
  • EASY INSTALLATION: All required hardware needed for installation is included in the box
  • ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
SaleBestseller No. 5
Brembo 09.7812.21 UV Coated Pillar Vented Front Brake Rotor SUBARU OE# 26300FE070
  • HIGH CARBON CONTENT: Experience enhanced driving comfort and performance, thanks to high carbon content that minimizes vibration and noise.
  • PERFORMANCE: Bremboโ€™s exclusive, patented Pillar Venting Technology (PVT) enhances cooling potential and increases rotor resistance to cracking by more than 40%.
  • EASY AND IMMEDIATE INSTALLATION: All required hardware needed for installation is included in the box.
  • RESISTS CORROSION: New anti-corrosion technology developed in collaboration with original equipment (OE) manufacturers deliver better fit and longer brake life.
  • ORIGINAL EQUIPMENT CERTIFIED: Many vehicles come from the factory equipped with Brembo brakes. For all others, Brembo always meets or exceeds the material specs used by the original manufacturer.

Last update on 2026-05-28 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...