NHTSA ID Number: 10176028
Manufacturer Communication Number: 06-76-20
Summary
This service Information bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed. Because of their aluminum construction, it is critical to take extra care when servicing.
NUMBER: 06-76-20
DATE: 05/26/20
| APPLICABILITY: | 2004-20MY WRX and WRX STI 2013-20MY BRZ |
| SUBJECT: | Brembo Brake Calipers- Special Servicing |
INTRODUCTION:
This Service Information Bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed above. Because of their aluminum construction, it is CRITICAL to take extra care when servicing.
PART INFORMATION:
IMPORTANT REMINDER: When needed, always order the most up-to-date replacement hardware based on the specific VIN being repaired. This is especially important for the caliper bolts referenced below as different bolts are used for different model years.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for brake caliper removal and installation remain unchanged. Additional precautions to follow are supplied below. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
- When caliper assembly removal is necessary, it is CRITICAL to inspect the threads of the retaining bolts closely before reinstallation. If inspection reveals the surface coating of the bolt threads is peeling or otherwise damaged, the affected bolt(s) MUST be replaced to prevent damaging the threads in the aluminum caliper body as shown in the example photos below.
NOTE: If the mounting bolt threads in the caliper are damaged, the caliper assembly must be replaced.
- When re-mounting the calipers, tighten both retaining bolts CAREFULLY BY HAND and EVENLY until the underside of the bolt heads bottom against the bracket. Once both bolts are fully installed against the mounting bracket, proceed with final torqueing to the specified values as listed in the applicable Service Manual.
NOTE: Additional Brembo-specific disc brake servicing procedures and precautions relating to brake hose replacement are supplied in TSB 06-64-18.
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
40 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 06-76-20
DATE: 05/26/20
MC-10176028-0001.pdf 1125.834KB
- PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
- MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
- FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
- EASY INSTALLATION: All required hardware needed for installation is included in the box
- ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
- PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
- MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
- FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
- EASY INSTALLATION: All required hardware needed for installation is included in the box
- ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
- PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
- MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
- FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
- EASY INSTALLATION: All required hardware needed for installation is included in the box
- ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
- PRECISE VEHICLE COMPATIBILITY: Designed to fit 2015 to 2019 Subaru Outback, 2015 to 2019 Subaru Legacy (3.6 H6 Engine), 2006 to 2014 Subaru Tribeca, and 2015 to 2021 Subaru WRX (excluding Brembo brake). This brakes and rotors kit front provides dependable fitment and works as a front rotors and brake pads kit for compatible Subaru models.
- RELIABLE BRAKING FOR DAILY DRIVING: ValueMAX brake kits deliver dependable stopping for daily driving. Perfect for school runs, traffic stops, and commuting, this front brake kit ensures reliable performance, while the front brakes and rotors kit provides smooth, consistent braking every day for safe and worry free driving.
- OEM SPEC ROTOR CONSTRUCTION: G3000/G11H18 cast iron rotors are precision machined for smooth pad bedding and stable pedal response. This rotors and brake pads setup ensures reliable braking, while the front brake rotors and pads provide direct fit precision for everyday driving with consistent stopping power.
- LOW DUST CERAMIC PADS: Carbon infused ceramic brake pads reduce brake dust up to 60% while maintaining stable friction, minimizing rotor wear, pedal vibration, and low speed noise. This brake pads and rotors kit ensures reliable braking, and the rotors and brake pads front deliver smooth, consistent stopping performance.
- COMPLETE FRONT BRAKE KIT: Includes 2 front OEM spec brake rotors, 4 low dust ceramic brake pads, and all installation hardware. Designed as a direct bolt on replacement with no modifications required, this front brakes and rotors setup delivers reliable stopping, while the front rotors and brake pads kit provides smooth, consistent braking every day.
- PERFORMANCE: Reduced friction wear and dust emission means more beautiful wheels with less cleaning.
- MAXIMUM DRIVING COMFORT: The chamfers and slots on Brembo brake pads improve braking comfort by minimizing vibration and noise.
- FRICTION MATERIALS: With more than 100 different friction materials, Brembo brake pads meet the needs of different markets and vehicle applications.
- EASY INSTALLATION: All required hardware needed for installation is included in the box
- ORIGINAL EQUIPMENT CERTIFIED: Brembo always meets or exceeds the material specs used by the original manufacturer.
SEOCONTENT-START
Bulletin Number: 06-76-20; Date: 05/26/20 Page 1 of 2 Continued… NUMBER: 06-76-20 DATE: 05/26/20 APPLICABILITY: 2004-20MY WRX and WRX STI 2013-20MY BRZ SUBJECT: Brembo Brake Calipers- Special Servicing Precautions CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. INTRODUCTION: This Service Information Bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed above. Because of their aluminum construction, it is CRITICAL to take extra care when servicing. PART INFORMATION: IMPORTANT REMINDER: When needed, always order the most up-to-date replacement hardware based on the specific VIN being repaired. This is especially important for the caliper bolts referenced below as different bolts are used for different model years. SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for brake caliper removal and installation remain unchanged. Additional precautions to follow are supplied below. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair. • When caliper assembly removal is necessary, it is CRITICAL to inspect the threads of the retaining bolts closely before reinstallation. If inspection reveals the surface coating of the bolt threads is peeling or otherwise damaged, the affected bolt(s) MUST be replaced to prevent damaging the threads in the aluminum caliper body as shown in the example photos below. SERVICE INFORMATION BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2020 Subaru of America, Inc. All rights reserved. Bulletin Number: 06-76-20; Date: 05/26/20 Page 2 of 2 NOTE: If the mounting bolt threads in the caliper are damaged, the caliper assembly must be replaced. • When re-mounting the calipers, tighten both retaining bolts CAREFULLY BY HAND and EVENLY until the underside of the bolt heads bottom against the bracket. Once both bolts are fully installed against the mounting bracket, proceed with final torqueing to the specified values as listed in the applicable Service Manual. NOTE: Additional Brembo-specific disc brake servicing procedures and precautions relating to brake hose replacement are supplied in TSB 06-64-18. IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





