Accessory Installation Guide
| 2022 Outback Seat Back Protector | J501SAN222 |
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION
PART NUMBER: J501SAN222
NUMÉRO DE PIÈCE : J501SAN222
DESCRIPTION: OUTBACK SEAT BACK PROTECTOR
DESCRIPTION: PROTECTEUR DE DOSSIER DE SIÈGE – OUTBACK
1
Collapse rear seats and remove headrests (See owner’s manual for details).
1A
For Wilderness Edition only:
Before installation, use alcohol pad to clean the lower area of the seatback along the bottom seam, below the Child Seat Tether Anchor to ensure proper adhesion. Remove protectors from the back of adapter pads and discard.
1b
Install the adapter pad along the bottom seatback seam and align with the Child Seat Tether Anchor on both driver’s and passenger’s sides. Massage the adapter pad to ensure proper adhesion.
2
Hold top and bottom of tray up (preventing the velcro strips from adhering to the vehicle carpet) while sliding tray into position. Ensure Seat Back Protector cut-out retention flap engages child seat tether hook trim pieces in all three positions. Also, ensure the seatback protectors are even across the top of both sides.
3
Apply pressure around perimeter of seat back protector and child tether cut-outs to ensure adequate connection to vehicle.
4
Lift seats back to vertical position while pushing down on hinge areas of seatback protector.
5
Re-install headrests, with bungees installed under the headrest post bezels to prevent rubbing on the headrest posts.
J501SAN222
OUTBACK SEAT BACK PROTECTOR
- Thick & Durable Protection – Keep Your Car Seats Looking New: Siivton car seat protector is made of extra-thick, high-density padding that provides excellent cushioning and prevents indentations, scratches, and wear caused by child car seats, booster seats, or heavy gear
- Secure & Stable – Triple Anti-Slip Design: Designed with a non-slip mesh backing, anti-slip tab that tucks into seat creases, and an adjustable headrest strap, this seat protector stays firmly in place — even during bumpy rides or frequent in-and-outs
- ISOFIX Compatible – Smart Design for All Car Seats: Features convenient cutouts on both sides to ensure seamless installation of ISOFIX or LATCH-equipped child safety seats without interfering with seat anchors or safety features
- Kid-Friendly Storage – 2 Mesh Pockets for Easy Access: Built-in mesh pockets at the bottom offer handy storage for toys, snacks, bottles, or wipes — keeping your back seat organized and your child entertained on long drives
- Fits Most Vehicles – For Leather & Fabric Seats: Universal fit for most car, SUV, or truck seats. Compatible with both leather and fabric interiors, offering full back seat coverage while maintaining your car’s clean, premium look
- Compatible Models：Front car seat covers fit Subaru（ Outback Forester Crosstrek Legacy Impreza）
- 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- ✓ All-Time Protection - Our Back Seat Protector will ensure that your seat remains in perfect condition by protecting leather or upholstery from muddy little feet that bring along with them dirt and mud! Gone will be the days of traveling with a less than perfect car interior.
- 【Protect Seat from Infant Booster Imprint】- Carseat seat protectors is made of 600D fabric and PVC leather.Thickened padding, good resilience. Installed under the baby safety seat to protect back seat against wear and tear, effectively extend the life of the car seat
- 【Waterproof and Easy to Clean】- Meolsaek seat protector carseat made of high-quality Oxford fabric, can use a damp cloth to wipe off dirt caused by food spills or pet saliva. Protect the leather and cloth fabric car sea, save worry and effort
- 【Dense Non-slip Back Dots, Won't Slip】- with Adjustable straps, Car seat protector is very firmly fixed on the car seat, , which can firmly tie the seat cover to the headrest. This car seat cover has anti-dense non-slip points on the back for better grip, whether it is the back seat or front seat of the car, it can fit well
- 【Not Easy to Fade & Not Stain the Seat】- After careful comparison and selection, the back anti slip dots the car seat protectors are made of light-colored bumps, which are safe and heat-resistant, not easy to fade, No need to worry about soiling the light leather seats in summer
- 【Carseat Protectors for Vehicles】- Large car seat protective comfortably covers front and back car seats . The backrest: 23.6 x19 inch, the seat:18.5 x 19 inch, the mesh is 15 x 8.5 inch. The pockets in the bottom for storing your child’s toys, books, and treats. It is a good product for the whole family to travel or people's daily essentials
- Rear Seat Back Protector
- Genuine Subaru Part Number: J501SFN240
- Crosstrek (non wilderness) (non-hybrid) 2024 2025 2026
- Provides additional protection to the rear seatbacks when lowering the seats to transport larger cargo
- Use in conjunction with the Cargo Tray (Sold Seperatly).
SEOCONTENT-START
MEANING OF CHARACTERS: SIGNIFICATION DES SYMBOLES: Collapse rear seats and remove headrests (See owner’s manual for details). PART NUMBER: J501SAN222 NUMÉRO DE PIÈCE : J501SAN222 :Install / :Poser :Move / :Déplacer DESCRIPTION: OUTBACK SEAT BACK PROTECTOR DESCRIPTION: PROTECTEUR DE DOSSIER DE SIÈGE – OUTBACK :Remove / :Enlever Adpater Pad Kit (Wilderness Edition) Seat Back Protector Adapter pad x 3 Alcohol pad x 2 1 A INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION 1A 1b For Wilderness Edition only: Before installation, use alcohol pad to clean the lower area of the seatback along the bottom seam, below the Child Seat Tether Anchor to ensure proper adhesion. Remove protectors from the back of adapter pads and discard. Install the adapter pad along the bottom seatback seam and align with the Child Seat Tether Anchor on both driver’s and passenger’s sides. Massage the adapter pad to ensure proper adhesion. Apply pressure around perimeter of seat Lift seats back to vertical position while back protector and child tether cut-outs to pushing down on hinge areas of seatback ensure adequate connection to vehicle. protector. the headrest post bezels to provent rubbing on the headrest posts. 5 Re-install headrests, with bungees installed under 2 Hold top and bottom of tray up (preventing the velcro strips from adhering to the vehicle carpet) while sliding tray into position. Ensure Seat Back Protector cut-out retention flap engages child seat tether hook trim pieces in all three positions. Also, ensure the seatback protectors are even across the top of both sides. 3 4
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.