NHTSA ID Number: 10140502
Manufacturer Communication Number: 05-61-16
Summary
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
NUMBER: 05-61-16
DATE: 04/12/16
| APPLICABILITY: | 2012-2016MY Impreza 2.0L Models |
| 2013-2016MY XV Crosstrek | |
| 2015-2016MY WRX and WRX STI | |
| 2014-2016MY Forester | |
| 2013-2016MY BRZ | |
| SUBJECT: | “Popping” Sound from Front Strut Mounts on Low Speed Turns |
INTRODUCTION:
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.
PRODUCTION CHANGE INFORMATION:
The new strut mounts were incorporated into production as per the table below:
| Vehicle / Model | Starting VIN |
|---|---|
| WRX / WRX STI | G*828073 |
| Forester | G*521576 |
| Impreza 4-Door | G*010570 |
| XV Crosstrek | G*250836 |
| BRZ | G*602701 |
PART INFORMATION:
| Description | Part Number | Application |
|---|---|---|
| STRUT MOUNT- FRONT | 20320FG012
Subaru 20320FG013 20230FG012 Front Strut Mount WRX STi Crosstrek Forester Impreza Genuine OEM
| WRX, WRX STI, Impreza, XV Crosstrek & Forester |
| 20320AA112 | BRZ |
SERVICE PROCEDURE / INFORMATION:
The new strut mounts are identified by a printed date code on the underside of the strut mount as shown in the photos and illustrations below. Strut mounts with a date code of 151225** (12/25/2015) and newer are the new type. (The 2-digit “Group” number (**) is insignificant for this bulletin.)
| NOTE: The lot numbers are fairly small and may be difficult to see. The strut mount must be removed to see the number. |
- Road test the vehicle to confirm the customer concern.
- If the condition is confirmed and the sound determined to be coming from the strut mount(s), inspect the date code as outlined above.
- If the date code is determined to be before 12/25/2015, replace the affected strut mount(s) following the procedure in the applicable Service Manual.
- When complete, road test the vehicle again to confirm the repair.
20 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| SUBARU | BRZ | 2013-2016 |
| SUBARU | CROSSTREK | 2015-2016 |
| SUBARU | FORESTER | 2014-2016 |
| SUBARU | IMPREZA | 2012-2016 |
| SUBARU | WRX | 2015-2016 |
| SUBARU | WRX STI | 2015-2016 |
| SUBARU | XV CROSSTREK | 2013-2014 |
1 Associated Document
Manufacturer Communications
NUMBER: 05-61-16
DATE: 04/12/16
MC-10140502-9999.pdf 312.173KB
- 【Vehicle Fitment】 - Position: Front; Compatible with 2010-2014 Su-baru Outback [B14 Body Code]
- 【Suspension Kit Include】 2 x Front Lower Control Arm - ( 522-831 + 522-832 ) Driver & Passenger Side, 2 x Front Lower Ball Joints - K9513, 2 x Front Outer Tie Rod End Links - ES3712, 2 x Front Inner Tie Rod End Links - EV800049, 2 x Front Stabilizer Sway Bar End Links - K750084 , 2 x Rack and Pinion Boots
- 【About Control Arm】 - Control arms allow wheels to move up and down while preventing forward and rearward movement. They are typically equipped with bushings on the frame side of the vehicle and a ball joint on the wheel side of the vehicle that allow flex and controlled movement according to road conditions and steering input from the driver.
- 【Please Note】 - Before placing the order, Please refer to the Vehicle menu (amazonconfirmedfit) at the top left corner, select your vehicle's "Year, Make, Model" and click "Check Fit"to make sure the parts fit your car, or check the product page description to make sure it matches exactly.Any questions please free to contact us and you will get a satisfactory solution.
- 【OEM Part Number】 - K623343 K623344 K750084 EV800049 ES3712 K9513 20202AJ01A 20202AJ01C 20202AJ05A 20202AJ00A 20202AJ00C 20202AJ04A 20420-XA000 45G20688 536-036 20206AJ000 21067GA050 20206SJ000 34141AA041 34141AA042 34141AC010 34141AC0109E 34161SA000 34161SA001 34160AE000 34160AE001 45D2183 X47BJ3874 TC959 JBJ212 CB0355 X47TR3867 83014 46656 CR0575 X47CA0014 X47CA0015 101-5664 101-5238 101-4585 101-4105
- Kit Includes: 2 Rear Lower Rearward Control Arms; 2 Rear Sway Bar Links; 2 Rear Upper Control Arms
- Reference Numbers: 20250 AE01A; 20250AE01A; 20250AE030; 20250AE031; 20250AE03A; 20250AE050; 20250AE051; 20250AE05A; 20250AE09A; 20250AE10A; 20250AG14A; 20250AG15A; 20470 AE000; 20470 AE001; 20470 AE00B; 20470 AE00C; 20470AE000; 20470AE001; 20470AE00A
- YOUR TRUSTED DIY VIDEO SOURCE: TRQ offers the largest catalog of DIY videos for replacement parts, making installation easier and repairs more accessible. Our mission is to help you "View Before You Do," with hundreds of new videos added weekly.
- TRUST & COMPATIBILITY: For over 25 years, TRQ has been the premium choice for direct-fit replacement parts. Confirm fitment with the Amazon Garage "confirmed fit" feature and review our full compatibility chart below before purchase.
- EASE OF INSTALLATION: Save time and effort with pre-assembled components designed as direct replacements for the original equipment, ensuring precise fit and eliminating the need for modifications.
- 【Vehicle Fitment】 - Position: Front; Compatible with 2012-2016 Su-baru Impreza [For H4-2.0L 1995cc Naturally Aspirated]
- 【Suspension Kit Include】 2 x Front Lower Control Arm - ( 524-789 + 524-790 ) Driver & Passenger Side, 2 x Front Lower Ball Joints - K9513, 2 x Front Outer Tie Rod End Links - ES3712, 2 x Front Inner Tie Rod End Links - EV801185, 2 x Front Stabilizer Sway Bar End Links - K750049 , 2 x Rack and Pinion Boots
- 【About Control Arm】 - Control arms allow wheels to move up and down while preventing forward and rearward movement. They are typically equipped with bushings on the frame side of the vehicle and a ball joint on the wheel side of the vehicle that allow flex and controlled movement according to road conditions and steering input from the driver.
- 【Please Note】 - Before placing the order, Please refer to the Vehicle menu (amazonconfirmedfit) at the top left corner, select your vehicle's "Year, Make, Model" and click "Check Fit"to make sure the parts fit your car, or check the product page description to make sure it matches exactly.Any questions please free to contact us and you will get a satisfactory solution.
- 【OEM Part Number】 - 524-789 524-790 K750049 EV801185 ES3712 K9513 20202FJ010 CB72253 20202FJ000 CB72254 20470SA000 20470FE000 20470FE000 34160FJ000 34141AA041 34141AA042 34141AC010 34141AC0109E 34161SA000 34161SA001 20206AJ000 21067GA050 20206SJ000 CMS801193 GS801193 CMS801192 GS801192 45D2183 X47BJ3874 X47CJ6922 X47CJ6991 GK9513 B9513
- [Vehicle Fitment]: Compatible with Subaru Forester 2003-2008 (Naturally Aspirated), Forester 2004-2008 (Turbocharged), Impreza 2004-2005 (Turbocharged), Impreza 2006-2006 (Fit WRX STI & Sedan & Turbocharged), Impreza 2007-2007 (Fit WRX STI Limited & Sedan & Turbocharged) --- A-Premium Forester suspension kit with original dimensions for easy installation
- [Installation Position]: Front & Rear Suspension Left and Right Side
- [Professional Replacement]: This A-Premium front and rear suspension kit is replacement for above model's suspension system, and may help you resolve those problems: ① clunking noise ② steering wander ③ uneven tire wear ④ excessive vibration ⑤ poor handling
- [Specification]: Package Detail: 2 x Rear Sway Bar Links, 2 x Front Sway Bar Links, 2 x Front Lower Ball Joints, 2 x Front Outer Tie Rod Ends, 2 x Front Inner Tie Rod Ends; Reference Part Number: K9513, ES3712, EV800049, K750049, K750041, 32006834, 32010111, 34160AE000, 34160AE001
- [Buy with Confidence]: Our meticulously engineered A-Premium suspension kit is backed by a one-year, unlimited-mileage warranty. We carry a wide range of automotive accessories, allowing you to hit the road with complete peace of mind
- 【Compatibility】K750084 Front Sway Bar End Links Fit for [Subaru] 2006-2007 B9 Tribeca | 2014-2018 Forester (S13 Body Code) | 2016-2017 Crosstrek (G33 Body Code) | 2013-2015 XV Crosstrek (G33 Body Code) | 2010-2014 Outback [B14 Body Code] | 2008-2014 Tribeca (W10 Body Code) | 2015-2019 WRX (V10 Body Code) / WRX STI (V10 Body Code)
- 【Package Includes】2 x Front Stabilizer Bar End Link - K750084
- 【Optimized Vehicle Stability】 Sway bars end link can diminish the degree of vehicle roll during cornering, providing superior stability of the vehicle body when turning or during emergency avoidance maneuvers, thereby enhancing the safety of the vehicle and offering a more comfortable riding experience.
- 【Eliminate noise】 If you experience the following situations, it's time to replace the Sway bars end link: clunking sounds from the suspension on bumpy roads or during turns, body sway while driving, steering wheel pull, and uneven tire wear. Upgrading to our sway bar can resolve these issues, enhancing your driving experience. Plus, our special grease nipple design helps maintain the lubrication of the sway bar, reducing friction-induced noise and increasing driving comfort.
- 【High-quality】 We've specially added a unique blue electroplated design and bushing design, which not only showcases a distinctive luster and texture but also boasts wear resistance, corrosion protection, rust prevention, and dust resistance, safeguarding the sway bar from wear and tear. Regular lubrication through the grease nipple helps reduce friction between the sway bar and bushing, thereby extending the service life of the sway bars end link.
SEOCONTENT-START
Bulletin Number: 05-61-16; Date: 04/12/16 Page 1
NUMBER: 05-61-16
DATE: 04/12/16
APPLICABILITY: 2012-2016MY Impreza 2.0L Models
2013-2016MY XV Crosstrek
2015-2016MY WRX and WRX STI
2014-2016MY Forester 2013-2016MY BRZ
SUBJECT: “Popping” Sound from Front Strut Mounts on Low Speed Turns
Continued…
SERVICE INFORMATION
ATTENTION:
GENERAL MANAGER 0
PARTS MANAGER 0
CLAIMS PERSONNEL 0
SERVICE MANAGER 0 IMPORTANT – All
Service Personnel Should Read and Initial in the boxes provided, right.
© 2016 Subaru of America, Inc. All rights reserved.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
SUBARU OF AMERICA, INC. IS ISO 14001 COMPLIANT
ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotiveproductsinamannerthatisfriendly to our environment and in accordance with all local, state and federal laws and regulations.
INTRODUCTION:
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns. PRODUCTION CHANGE INFORMATION:
The new strut mounts were incorporated into production as per the table below:
Vehicle / Model
WRX / WRX STI
Forester Impreza 4-Door XV Crosstrek BRZ
Starting VIN G*828073 G*521576 G*010570 G*250836 G*602701 PART INFORMATION:
Description
Part Number
Application
STRUT MOUNT- FRONT 20320FG012
20320AA112
WRX, WRX STI, Impreza, XV
Crosstrek & Forester BRZ
SERVICE PROCEDURE / INFORMATION:
The new strut mounts are identified by a printed date code on the underside of the strut mount as
shown in the photos and illustrations below. Strut mounts with a date code of 151225** (12/25/2015)
and newer are the new type. (The 2-digit “Group” number (**) is insignificant for this bulletin.) Bulletin Number: 05-61-16; Date: 04/12/16 Page 2
• Road test the vehicle to confirm the customer concern.
• If the condition is confirmed and the sound determined to be coming from the strut mount(s),
inspect the date code as outlined above.
• If the date code is determined to be before 12/25/2015, replace the affected strut mount(s)
following the procedure in the applicable Service Manual.
• When complete, road test the vehicle again to confirm the repair. WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by a Subaru Added
Security Classic or Gold plan, this repair may be submitted using the following claim information: Labor Description
ONE STRUT MOUNT R&R*
BOTH STRUT MOUNTS R&R* Labor Operation # B611-201 B611-204 Applicability EXCEPT BRZ BRZ
EXCEPT BRZ BRZ Failure Code NAB-25 Labor Time
2.0
1.7
2.4
2.1 * INCLUDING wheel alignment IMPORTANT REMINDERS:
• SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
• Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
• Always refer to STIS for the latest service information before performing any repairs.
NOTE: The lot numbers are fairly small and may be difficult to see. The strut mount must be removed
to see the number.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.









