NHTSA ID Number: 10093914
Manufacturer Communication Number: 10-83-15
Summary
THIS SERVICE INFORMATION BULLETIN PROVIDES PRECAUTIONS TO USE WHEN REMOVING THE HVAC CONTROL PANEL TO PREVENT DAMAGING THE BLOWER FAN SPEED SWITCH. WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR BECOMES STRESSED, THE SWITCH MAY BE DAMAGED. IF THE CONNECTOR (LOWER) PORTION OF THE SWITCH BECOMES SEPARATED FROM THE SWITCH BODY EVEN SLIGHTLY (SEE FIG. 1 ON PAGE 2), THE HVAC CONTROL PANEL ASSEMBLY MUST BE REPLACED. THE SWITCH ITSELF IS NOT SERVICEABLE. NOTE: FOR 2012MY IMPREZA, SEE TSB 10-78-12, DATED 4/18/2012.
NUMBER: 10-83-15
DATE: 11/25/15
| APPLICABILITY: | 2014-16MY Forester with Manual HVAC Systems |
| 2013-16MY Impreza 2.0L with Manual HVAC Systems | |
| 2013-16MY Crosstrek with Manual HVAC Systems | |
| SUBJECT: | HVAC Control Panel Removal Precautions |
INTRODUCTION
This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed switch wiring harness is pulled taught or becomes stressed, the switch may be damaged. If the connector (lower) portion of the switch becomes separated from the switch body even slightly (see Fig. 1 on page 2), the HVAC control panel assembly must be replaced. The switch itself is not serviceable. NOTE: For 2012MY Impreza, see TSB 10-78-12, dated 4/18/2012.
SERVICE PROCEDURE / INFORMATION
- CAREFULLY remove the center panel following the procedure in the applicable Service Manual. ALWAYS take proper precautions to protect the face of the panel and the surrounding trim surfaces from scratching / damage as shown in the photo below.
- DO NOT allow the blower fan switch harness to become stressed or taught.
- While maintaining slack on the blower switch wiring harness, disengage the lock tab by pressing it in gently and remove the connector from the switch.
- Set the center panel aside in a safe place to protect it while removed from the vehicle.
- Follow the same precautions when reconnecting the blower switch harness. Always avoid placing any stress or tension on the harness during the panel installation process.
IMPORTANT: If any of the alignment tabs or the lower portion of the switch become disengaged from the body of the switch, the HVAC control panel assembly must be replaced. DO NOT attempt to snap it back together as damage to the internal contacts has most likely already occurred. The resulting high resistance inside the switch may cause it to be damaged and become inoperative.
10 Affected Products
Vehicles
1 Associated Document
Service Bulletin Document
NUMBER: 10-83-15
DATE: 11/25/15
SB-10093914-2280.pdf 358.822KB
- SLEEK and DURABLE: Our auto trim removal tool set fits in any crevices and works efficiently in removing exterior and interior trim, wheel hubs, door panel. without scratching your car.
- UNIVERSAL AUTO TRIM REMOVAL TOOL KIT: It includes 5 job-specific auto trim removal tools to make automotive removals easy. It is designed to be universally applicable to vehicles, boats, and more
- UNIQUE ERGONOMIC DESIGN: These are made of sturdy and pliable nylon material with a unique ergonomic design for easy handling to effectively save effort and time on repairs or maintenance.
- EASY and CONVENIENT: Perfect for professionals and beginners doing any care modifications. They are compact, making them easy and convenient to carry so you can use them anytime, anywhere.
- DO REPAIR and MAINTENANCE LIKE A PRO: We are confident you'd love this car plastic trim removal tool kit as much as we do Get yours now and perform repair or maintenance tasks like a pro
- Non-Scratch Pry Tools: Made from durable nylon, this auto trim removal tool kit protects your car’s surfaces from scratches while offering strong leverage for trims, panels, and dashboards
- Essential for Panel Jobs: This car panel removal tool set makes removing dashboards, door panels, and plastic trim fast and simple, whether you're working on a car, SUV, or other vehicle types
- Flexible and Durable Build: Designed to last, each car trim removal tool is sturdy yet flexible enough to handle tight angles and edges during disassembly without damaging fragile surfaces
- Universal Clip Tool Set: Includes multiple shapes for different applications; this clip removal tool helps safely extract rivets, fasteners, and car clips without prying metal-to-metal
- Compact for Any Job: The lightweight car trim removal tool kit fits easily in your glove box or toolbox, ready for quick access whenever you need to fix, replace, or upgrade car interiors
- 19 Pcs Trim removal tools - Works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
- High Quality Trim Tools - Made of toughened nylon fibers with the strength to pry up panels and pop off panel retaining pins for non-destructive automotive modifications
- Ergonomic Design - These door panel removal tools are easy to grip and fit into hard-to-reach spaces and crevices. Saves time and labor on all kinds of car interiors and exteriors
- Easy for Storage - Auto trim removal tool kit comes with a portable zippered storage bag to organize all your tools after use. You never have to worry about losing your tools
- Package Include - 11pcs interior trim tools, 2pcs fastener remover tools, 2pcs stereo removal tools, 3pcs car terminal removal tools, 1pc trim clip removal Pliers, and a portable storage bag
- Damage Prevention - The trim removal tool boasts a larger, flatter, and wider contact area compared to traditional tools. Its integrated wedged center significantly enhances removal efficiency while preventing damage to both trim and walls.
- Superior Material and Durability - Our trim puller is made from carbon steel and 65Mn steel with black electrophoretic and polished finish, which protects against corrosion and gives our pry bar added durability and strength. So the Trim Puller is a very beefy tool, and it will hold up well to repeated whacking.
- Versatile Application for Precision Projects - Perfect for commercial tasks and meticulous remodel projects, including applications in cabinets, countertops, and flooring. From kitchen remodels to delicate tile removal, it excels in precision work such as extracting staples with minimal effort.
- Ergonomic Design for Comfort - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact-absorbing TPR+PP handle makes it comfortable to hold, though.
- Revolutionary Tool - Our Trim Puller is a very beefy tool. The Built-in spring design assists in separating the trim from the wall freely and quickly. The 15-degree wedged center is for easy extraction of trim and baseboards.Goldblatt holds a U.S. patent for this Trim Puller, patent number US 11,142,921.
- Complete trim removal tool kit: 1 pcs 2-in-1 clip 2 pcs fastener removal tool & 4 plastic pry tools .no sharp edges to harm surfaces
- Portable & handy: This trim removal kit is compact and car-friendly, perfect for keeping in your vehicle so you're always ready for emergency repairs
- Wide application: These 7-piece clip pliers and pry bar tools are engineered for universal automotive applications, including but not limited to door panel removal,dashboard disassembly,interior trim detachment,bumper and fender liner access and upholstery and headliner repair
- Precision fit for tight spaces:The tapered, non-marring pry bars slide effortlessly into narrow gaps between panels, dashboards, and trim pieces—no prying with screwdrivers or risking paint damage
- Simply let us know customer services for help,replacement or refund if you have any problems with your Doaho 7 pcs clip pliers set and fastener remover
SEOCONTENT-START
Bulletin Number: 10-83-15; Date 11/25/15 Page 1 INTRODUCTION This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. When removing the control panel, if the fan speed switch wiring harness is pulled taught or becomes stressed, the switch may be damaged. If the connector (lower) portion of the switch becomes separated from the switch body even slightly (see Fig. 1 on page 2), the HVAC control panel assembly must be replaced. The switch itself is not serviceable. NOTE: For 2012MY Impreza, see TSB 10-78-12, dated 4/18/2012. SERVICE PROCEDURE / INFORMATION • CAREFULLY remove the center panel following the procedure in the applicable Service Manual. ALWAYS take proper precautions to protect the face of the panel and the surrounding trim surfaces from scratching / damage as shown in the photo below. • DO NOT allow the blower fan switch harness to become stressed or taught. • While maintaining slack on the blower switch wiring harness, disengage the lock tab by pressing it in gently and remove the connector from the switch. • Set the center panel aside in a safe place to protect it while removed from the vehicle. • Follow the same precautions when reconnecting the blower switch harness. Always avoid placing any stress or tension on the harness during the panel installation process. NUMBER: 10-83-15 DATE: 11/25/15 APPLICABILITY: 2014-16MY Forester with Manual HVAC Systems 2013-16MY Impreza 2.0L with Manual HVAC Systems 2013-16MY Crosstrek with Manual HVAC Systems SUBJECT: HVAC Control Panel Removal Precautions CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS ISO 14001 COMPLIANT ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Continued… SERVICE INFORMATION ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2015 Subaru of America, Inc. All rights reserved. Bulletin Number: 10-83-15; Date 11/25/15 Page 2 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs. IMPORTANT: If any of the alignment tabs or the lower portion of the switch become disengaged from the body of the switch, the HVAC control panel assembly must be replaced. DO NOT attempt to snap it back together as damage to the internal contacts has most likely already occurred. The resulting high resistance inside the switch may cause it to be damaged and become inoperative. Fig. 1
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.