NHTSA ID Number: 10201035
Manufacturer Communication Number: 18-214-21
Summary
This bulletin provides a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site.
NUMBER: 18-214-21
DATE: 08/11/21
INTRODUCTION
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals.
Paper manuals may have different page numbering then what is reflected below, based on multiple new and revised pages. Please refer to the information contained on the STIS web site for all future, update service manual information.
| YEAR | MODEL | SECTION | SUB-SECTION | PAGE or CHAPTER | DESCRIPTION OF CHANGE |
| 2009 | Impreza | FU(H4SO) | Throttle Body Inspection | FU 14, 15 | Inspection notes were added and an inspection step was changed |
| FU(H4DOTC) | FU 15 | Inspection notes were added and an inspection step was changed | |||
| SP(H4SO) | Accelerator Pedal Sensor | SP 5 | A helpful note was added | ||
| 2010 | Impreza | FU(H4SO) | Throttle Body Inspection | FU 14, 15 | Inspection notes were added and an inspection step was changed |
| FU(H4DOTC) | FU 15 | Inspection notes were added and an inspection step was changed | |||
| SP(H4SO) | Accelerator Pedal Sensor | SP 5 | A helpful note was added | ||
| 2011 | Impreza | FU(H4SO) | Throttle Body Inspection | FU 14, 15 | Inspection notes were added and an inspection step was changed |
| SP(H4SO) | Accelerator Pedal Sensor | SP 5 | A helpful note was added | ||
| 2012 | Impreza | Brakes | Brake | Master Cylinder >Installation | Installation instructions and illustrations were changed |
| Brake Booster >Installation | Installation instructions and illustrations were changed | ||||
| 2013 | Impreza/ Crosstrek | Brakes | Brake | Master Cylinder >Installation | Installation instructions and illustrations were changed |
| Brake Booster >Installation | Installation instructions and illustrations were changed |
| YEAR | MODEL | SECTION | SUB-SECTION | PAGE or CHAPTER | DESCRIPTION OF CHANGE |
| 2014 | Impreza/ Crosstrek | Diagnostics | Hybrid Electric Vehicle Diag | Drive Cycle >Procedure >Drive Cycle J | Drive Cycle J was added |
| Read Current Data > Operation >Hybrid Powertrain Control Systems | A row was added to the table | ||||
| Diagnostics w/Phenomenon >Inspection >>Symptom Table >>Check Voltage Difference Between Blocks | A description and hyperlink were added to the symptom table and a TT was added | ||||
| Brakes | Brake | Master Cylinder >Installation | Installation instructions and illustrations were changed | ||
| Brake Booster >Installation | Installation instructions and illustrations were changed | ||||
| 2015 | Impreza/ Crosstrek | Body &
Electrical/ Wiring System | Security & Locks | Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key | A note about the secret code was added |
| Diagnostics | Hybrid Electric Vehicle Diag | Drive Cycle >Procedure >Drive Cycle J | Drive Cycle J was added | ||
| Read Current Data > Operation >Hybrid Powertrain Control Systems | A row was added to the table | ||||
| Diagnostics w/Phenomenon >Inspection >>Symptom Table >>Check Voltage Difference Between Blocks | A description and hyperlink were added to the symptom table and a TT
was added | ||||
| Brakes | Brake | Master Cylinder >Installation | Installation instructions and illustrations were changed | ||
| Brake Booster >Installation | Installation instructions and illustrations were changed | ||||
| 2016 | Impreza/ Crosstrek | Brakes | Brake | Master Cylinder >Installation | Installation instructions and illustrations were changed |
| Brake Booster >Installation | Installation instructions and illustrations were changed |
| YEAR | MODEL | SECTION | SUB-SECTION | PAGE or CHAPTER | DESCRIPTION OF CHANGE |
| 2017 | Crosstrek | Body & Electrical/ Wiring System | Security & Locks | Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key | A note about the secret code was added |
| Brakes | Brake | Master Cylinder >Installation | Installation instructions and illustrations were changed | ||
| Brake Booster >Installation | Installation instructions and illustrations were changed | ||||
| 2017 | Impreza | Diagnostics | Headlight/ Foglight Diag | Data Monitor >List | SRH Setup Status was added to the list |
| Diagnostics w/Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate | Changes were made to the TT | ||||
| Brakes | Brake | General Description >Component >Master Cylinder >Brake Pedal | The master cylinder and brake pedal illustrations were changed | ||
| Master Cylinder >Installation >Disassembly >Assembly | Some instructions were changed and removed | ||||
| Brake Booster >Installation > Brake Booster | |||||
| Brake Pipe >Installation | A caution to not bend the brake pipe was changed | ||||
| Brake Pedal >Installation >CVT Model | A caution about the clevis pin was changed |
| YEAR | MODEL | SECTION | SUB-SECTION | PAGE or CHAPTER | DESCRIPTION OF CHANGE |
| 2018 | Impreza/ Crosstrek | Body & Electrical/ Wiring System | Security & Locks | Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key | A note about the secret code was added |
| Diagnostics | Headlight/ Foglight Diag | Data Monitor >List | SRH Setup Status was added to the list | ||
| Diagnostics w/Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate | Changes were made to the TT | ||||
| Brakes | Brake | General Description > Component >Master Cylinder | The master cylinder illustration and tightening torque specs were changed | ||
| Master Cylinder >Installation | Installation step #1 was changed for Crosstrek model | ||||
| Brake Booster >Installation > Brake Booster | Installation steps were changed | ||||
| Air Bleeding >Procedure >Caliper | Descriptions were deleted | ||||
| Brake Pipe >Installation | A caution to not bend the brake pipe was changed | ||||
| 2019 | Impreza/ Crosstrek | Diagnostics | P-HEV Hybrid Powertrain Control Diag | General Scan Tool >Operation >How to Use General Scan Tool > Mode $07 | Mode $07 Description was Changed to Initial Emission-related Powertrain DTC |
| P-HEV Drive Motor Diag | |||||
| Plug-In Battery Charger Diag | |||||
| P-HEV High Voltage Battery Diag | |||||
| Headlight/ Foglight Diag | Data Monitor >List | SRH Setup Status was added to the list | |||
| Diagnostics w/Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate | Changes were made to the TT | ||||
| P-HEV Drive Motor Diag | Diag Procedure w/ DTC >DTC P1CCC96 | A change was made to step #2 of the TT |
| YEAR | MODEL | SECTION | SUB-SECTION | PAGE or CHAPTER | DESCRIPTION OF CHANGE |
| 2019 (cont.) | Impreza/ Crosstrek | Body & Electrical/ Wiring System | Security & Locks | Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key | A note about the secret code was added |
| Brakes | Brake | Master Cylinder >Installation | Installation step #1 was changed for Crosstrek model | ||
| Brake Booster >Installation >Except for Hybrid Model | The installation instructions were changed | ||||
| 2020 | Impreza/ Crosstrek | Diagnostics | P-HEV Hybrid Powertrain Control Diag | General Scan Tool >Operation >How to Use General Scan Tool > Mode $07 | Mode $07 Description was Changed to Initial Emission-related Powertrain DTC |
| P-HEV Drive Motor Diag | |||||
| Plug-In Battery Charger Diag | |||||
| P-HEV High Voltage Battery Diag | |||||
| Headlight/ Foglight Diag | Data Monitor >List | SRH Setup Status was added to the list | |||
| Diagnostics w/Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate | Changes were made to the TT | ||||
| P-HEV Drive Motor Diag | Diag Procedure w/ DTC >DTC P1CCC96 | A change was made to step #2 of the TT | |||
| Body & Electrical/ Wiring System | Security & Locks | Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key | A note about the secret code was added | ||
| Brakes | Brake | Master Cylinder >Installation | Installation step #1 was changed for Crosstrek model | ||
| Brake Booster >Installation >Except for Hybrid Model | The installation instructions were changed |
| YEAR | MODEL | SECTION | SUB-SECTION | PAGE or CHAPTER | DESCRIPTION OF CHANGE |
| 2021 | Impreza/ Crosstrek | Diagnostics | Engine | Diag Procedure w/ DTC >P0011 >P0014 >P0021 >P0024 | Steps were added to all four TTs |
| P-HEV Drive Motor Diag | Diag Procedure w/ DTC >DTC P1CCC96 | A change was made to step #2 of the
TT | |||
| Engine | Fuel Injection | Throttle Body >Inspection >Throttle Sensor | Notes were added and inspection instructions were changed | ||
| Engine Control Module >Installation | The immobilizer type was changed in the cautions section | ||||
| Speed Control Systems | Accelerator Pedal >Inspection >Except for Hybrid Model | A note was added |
22 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 18-214-21
DATE: 08/11/21
MC-10201035-0001.pdf 999.712KB
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM
systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required. - 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any 
- [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
- ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
- ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
- ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
- ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
- ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
- OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
- ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
- OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
- ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
- WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
SEOCONTENT-START
Bulletin Number: 18-199-21; Date: 08/11/21 Page 1 of 6 Continued… INTRODUCTION The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables contained within this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to always refer to the STIS web site when looking for the latest Service information. Printed pages will not be made available to update printed Service Manuals. Paper manuals may have different page numbering then what is reflected below, based on multiple new and revised pages. Please refer to the information contained on the STIS web site for all future, update service manual information. YEAR MODEL SECTION SUB-SECTION PAGE or CHAPTER DESCRIPTION OF CHANGE 2009 Impreza FU(H4SO) Throttle Body Inspection FU 14, 15 Inspection notes were added and an inspection step was changed FU(H4DOTC) FU 15 Inspection notes were added and an inspection step was changed SP(H4SO) Accelerator Pedal Sensor SP 5 A helpful note was added 2010 Impreza FU(H4SO) Throttle Body Inspection FU 14, 15 Inspection notes were added and an inspection step was changed FU(H4DOTC) FU 15 Inspection notes were added and an inspection step was changed SP(H4SO) Accelerator Pedal Sensor SP 5 A helpful note was added 2011 Impreza FU(H4SO) Throttle Body Inspection FU 14, 15 Inspection notes were added and an inspection step was changed SP(H4SO) Accelerator Pedal Sensor SP 5 A helpful note was added 2012 Impreza Brakes Brake Master Cylinder >Installation Installation instructions and illustrations were changed Brake Booster >Installation Installation instructions and illustrations were changed 2013 Impreza/ Crosstrek Brakes Brake Master Cylinder >Installation Installation instructions and illustrations were changed Brake Booster >Installation Installation instructions and illustrations were changed NUMBER: 18-214-21 DATE: 08/11/21 APPLICABILITY: 2009-2021 Impreza 2013-2021 Crosstrek SUBJECT: Service Manual Corrections SERVICE BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. © 2021 Subaru of America, Inc. All rights reserved. CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS ISO 14001 COMPLIANT ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Bulletin Number: 18-199-21; Date: 08/11/21 Page 2 of 6 YEAR MODEL SECTION SUB-SECTION PAGE or CHAPTER DESCRIPTION OF CHANGE 2014 Impreza/ Crosstrek Diagnostics Hybrid Electric Vehicle Diag Drive Cycle >Procedure >Drive Cycle J Drive Cycle J was added Read Current Data > Operation >Hybrid Powertrain Control Systems A row was added to the table Diagnostics w/ Phenomenon >Inspection >>Symptom Table >>Check Voltage Difference Between Blocks A description and hyperlink were added to the symptom table and a TT was added Brakes Brake Master Cylinder >Installation Installation instructions and illustrations were changed Brake Booster >Installation Installation instructions and illustrations were changed 2015 Impreza/ Crosstrek Body & Electrical/ Wiring System Security & Locks Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key A note about the secret code was added Diagnostics Hybrid Electric Vehicle Diag Drive Cycle >Procedure >Drive Cycle J Drive Cycle J was added Read Current Data > Operation >Hybrid Powertrain Control Systems A row was added to the table Diagnostics w/ Phenomenon >Inspection >>Symptom Table >>Check Voltage Difference Between Blocks A description and hyperlink were added to the symptom table and a TT was added Brakes Brake Master Cylinder >Installation Installation instructions and illustrations were changed Brake Booster >Installation Installation instructions and illustrations were changed 2016 Impreza/ Crosstrek Brakes Brake Master Cylinder >Installation Installation instructions and illustrations were changed Brake Booster >Installation Installation instructions and illustrations were changed Bulletin Number: 18-199-21; Date: 08/11/21 Page 3 of 6 Continued… YEAR MODEL SECTION SUB-SECTION PAGE or CHAPTER DESCRIPTION OF CHANGE 2017 Crosstrek Body & Electrical/ Wiring System Security & Locks Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key A note about the secret code was added Brakes Brake Master Cylinder >Installation Installation instructions and illustrations were changed Brake Booster >Installation Installation instructions and illustrations were changed 2017 Impreza Diagnostics Headlight/ Foglight Diag Data Monitor >List SRH Setup Status was added to the list Diagnostics w/ Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate Changes were made to the TT Brakes Brake General Description >Component >Master Cylinder >Brake Pedal The master cylinder and brake pedal illustrations were changed Master Cylinder >Installation >Disassembly >Assembly Some instructions were changed and removed Brake Booster >Installation > Brake Booster Brake Pipe >Installation A caution to not bend the brake pipe was changed Brake Pedal >Installation >CVT Model A caution about the clevis pin was changed Bulletin Number: 18-199-21; Date: 08/11/21 Page 4 of 6 Continued… YEAR MODEL SECTION SUB-SECTION PAGE or CHAPTER DESCRIPTION OF CHANGE 2018 Impreza/ Crosstrek Body & Electrical/ Wiring System Security & Locks Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key A note about the secret code was added Diagnostics Headlight/ Foglight Diag Data Monitor >List SRH Setup Status was added to the list Diagnostics w/ Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate Changes were made to the TT Brakes Brake General Description > Component >Master Cylinder The master cylinder illustration and tightening torque specs were changed Master Cylinder >Installation Installation step #1 was changed for Crosstrek model Brake Booster >Installation > Brake Booster Installation steps were changed Air Bleeding >Procedure >Caliper Descriptions were deleted Brake Pipe >Installation A caution to not bend the brake pipe was changed 2019 Impreza/ Crosstrek Diagnostics P-HEV Hybrid Powertrain Control Diag General Scan Tool >Operation >How to Use General Scan Tool > Mode $07 Mode $07 Description was Changed to Initial Emission-related Powertrain DTC P-HEV Drive Motor Diag Plug-In Battery Charger Diag P-HEV High Voltage Battery Diag Headlight/ Foglight Diag Data Monitor >List SRH Setup Status was added to the list Diagnostics w/ Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate Changes were made to the TT P-HEV Drive Motor Diag Diag Procedure w/ DTC >DTC P1CCC96 A change was made to step #2 of the TT Bulletin Number: 18-199-21; Date: 08/11/21 Page 5 of 6 Continued… YEAR MODEL SECTION SUB-SECTION PAGE or CHAPTER DESCRIPTION OF CHANGE 2019 (cont.) Impreza/ Crosstrek Body & Electrical/ Wiring System Security & Locks Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key A note about the secret code was added Brakes Brake Master Cylinder >Installation Installation step #1 was changed for Crosstrek model Brake Booster >Installation >Except for Hybrid Model The installation instructions were changed 2020 Impreza/ Crosstrek Diagnostics P-HEV Hybrid Powertrain Control Diag General Scan Tool >Operation >How to Use General Scan Tool > Mode $07 Mode $07 Description was Changed to Initial Emission-related Powertrain DTC P-HEV Drive Motor Diag Plug-In Battery Charger Diag P-HEV High Voltage Battery Diag Headlight/ Foglight Diag Data Monitor >List SRH Setup Status was added to the list Diagnostics w/ Phenomenon >Inspection >The Auto Headlight Beam Leveler Does Not Operate Changes were made to the TT P-HEV Drive Motor Diag Diag Procedure w/ DTC >DTC P1CCC96 A change was made to step #2 of the TT Body & Electrical/ Wiring System Security & Locks Function Setting >Procedure >Method for Stopping KAS Function by Operating Access Key A note about the secret code was added Brakes Brake Master Cylinder >Installation Installation step #1 was changed for Crosstrek model Brake Booster >Installation >Except for Hybrid Model The installation instructions were changed Bulletin Number: 18-199-21; Date: 08/11/21 Page 6 of 6 YEAR MODEL SECTION SUB-SECTION PAGE or CHAPTER DESCRIPTION OF CHANGE 2021 Impreza/ Crosstrek Diagnostics Engine Diag Procedure w/ DTC >P0011 >P0014 >P0021 >P0024 Steps were added to all four TTs P-HEV Drive Motor Diag Diag Procedure w/ DTC >DTC P1CCC96 A change was made to step #2 of the TT Engine Fuel Injection Throttle Body >Inspection >Throttle Sensor Notes were added and inspection instructions were changed Engine Control Module >Installation The immobilizer type was changed in the cautions section Speed Control Systems Accelerator Pedal >Inspection >Except for Hybrid Model A note was added
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.