NHTSA ID Number: 10235278
Manufacturer Communication Number: 12-320-21R
Summary
This Service Information Bulletin announces a design change made to the front and rear door outer garnish trim.
NUMBER: 12-320-21
DATE: 06/07/21
INTRODUCTION:
This Service Information Bulletin announces a design change made to the front and rear door outer garnish trim. The change involves use of high strength clips added to improve retention of the garnishes and prevent any unintentional loosening / removal caused by the user’s feet when entering and exiting the vehicle. The original clips are black in color and the newly designed clips are yellow in color. If unintentional loosing and/or removal of the outer door garnish is experienced, replaced the affected outer door garnish with the new part(s).
PRODUCTION CHANGE INFORMATION:
The new front door garnishes were incorporated into vehicle production as of starting VIN N3274236. The new rear door garnishes were incorporated into vehicle production as of starting VIN D0N3275328.
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
| Part Description | Part Number |
| Front Door Garnish, Right | 91112AN04C |
| Front Door Garnish, Left | 91112AN05B |
| Rear Door Garnish, Right | 91112AN06B |
| Rear Door Garnish, Right | 91112AN07B |
| Rear Door Garnish, Left | 91112AN56B |
| Rear Door Garnish,Left | 91112AN57B |
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedure for outer door garnish replacement is unchanged. There are additional tips listed below to assist with removal. Refer to the applicable Subaru Service Manual: Body & Electrical/WIRING SYSTEM > EXTERIOR/INTERIOR TRIM > Side Garnish & Spoiler.
Additional Tips:
When removing the garnishes, ALWAYS use a suitable plastic trim removal tool. Do NOT reuse or reinstall the Front Outer Door Garnish because the retaining clips are only to be used once.
STEP 1) Start garnish removal by releasing CLIP A first.
STEP 2) Release CLIP B second.
STEP 3) CAREFULLY pull the garnish away from door.
NOTE: No changes have been made to the current Warranty Labor Time Guide for this procedure.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| SUBARU | OUTBACK | 2020-2021 |
1 Associated Document
Manufacturer Communications
NUMBER: 12-320-21R
DATE: 06/07/21
REVISED: 04/05/23
MC-10235278-0001.pdf 453.579KB
NHTSA ID Number: 10198745
Manufacturer Communication Number: 12-320-21
Summary
This bulletin announces a design change made to the front door outer garnish trim.
1 Associated Document
Manufacturer Communications
NUMBER: 12-320-21
DATE: 06/07/21
MC-10198745-0001.pdf 1157.166KB
- 40pcs 90914-0007 Bumper, Engine Cover, Fender & Grille Push-Type Retainer for Subaru Baja, Forester, Impreza, Legacy, Outback & Tribeca 2011 - 2000
- 30pcs 90913-0067 Engine Cover and Fender Liner for Subaru B9, Forester, Legacy, Outback & Tribeca 2005 -
- 30pcs 90914-0051 Front Bumper & Quarter Panel Push-Type Retainer for Subaru Impreza, Legacy, Outback & Tribeca 2011 - 2005
- FITS VARIOUS SUBARU MODELS - The clips fit selected Subaru as well some other car brands.
- Premium OEM Upgraded Quality and Durable —Made of Premium Auto Grade Nylon：PA66(Not Ordinary Cheap Nylon),solid like metal.
- 30Pcs 90914-0007 Push-type clip replace for Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek work on Bumper, Engine Cover, Fender & Grille
- 30Pcs 90914-0065 body clips replace for Ascent, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, WRX, WRX STI, XV Crosstrek work on Front Fender Liner, Engine Cover, Hood & Quarter Panel
- 30Pcs 90914-0051 Front bumper & quarter panel push-type retainer compatible with BRZ, Legacy, Outback, Tribeca, Head Diameter: 20mm, Hole Size: 7mm, Stem Length: 9mm
- 30Pcs MR200300 Rocker molding push-type retainer compatible with Ascent, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek, Fits Into 9mm Hole
- 4 different sizes in the bag each one came in handy and it came with 1 tool, exact match for the factory clips. also must have for most Japanese cars repair or upgrade like honda & nissan and toyota
- 🔧 Multiple Solutions- Includes 19 Sizes of Subaru Body Interior and Exterior Retainer Fastener Clip, Total 190 Pieces. These Are Reliable Replacement for the Original Part That had Missing or Failed Due to Fatigue.
- ✅ Durable Construction - These Clips are Made from Quality Nylon Materials to Ensure Reliable Performance and Long Service Life.
- 🚗 Fits Most Subaru Models, Including Hood Insulation Retainer, Front & Rear Bumper Push-Type Retainer, Front Fender, Bumper & Quarter Panel Push-Type Retainer, Front Fender Liner, Engine Cover, Hood & Quarter Panel Push-Type Retainer, Nylon Nut, Fender Liner, Duct & Lower Moulding Push-Type Retainer, Garnish Moulding Retainer, Cowl Vent Push-Type Retainer, Trim Board Retainer, Engine Cover and Fender Liner Retainer, Screw Grommet with Sealer, Cowl Panel Vent Cap.
- ✉ Part Number: Subaru 🔷 1 #OE: 909140059; 🔷 2 #OE: 909130013; 🔷 3 #OE: 46064AE000; 🔷 4 #OE: 59130AA000; 🔷 5 #OE: 909140065; 🔷 6 #OE: 661179000; 🔷 7 #OE: 909140068; 🔷 8 #OE: 909130051; 🔷 9 #OE: 909130146; 🔷 10 #OE: 909140063; 🔷 11 #OE: 909130115; 🔷 12 #OE: 909130067; 🔷 13 #OE: 909130074; 🔷 14 #OE: 91084AA010; 🔷 15 #OE: 909140055; 🔷 16 #OE: 91486KJ010, 91486-FL020; 🔷 17 #OE: 57728AC090; 🔷 18 #OE: 909140007.
- ☺ Please Check the Part Number and Installation Position Information on the Picture Before Purchase.
- HIGH QUALITY: The retainer clips are made of high quality Black Nylon, Meet or Exceed OEM Specification, would not break or crack easily during use.
- WIDE APPLICATION: Widely used for side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels, can be used to fix a variety of automobile structures.
- Bumper Engine Cover Fender & Grille Push-Type Retainer Clip: Head Diameter: 21mm, Stem Length: 15mm, Fits into 10mm Hole. Be suitable for Subaru Baja, Forester, Impreza, Legacy, Outback & Tribeca 2000 – On. OEM: 90914-0007.
- Fender Liners Clips: Top Head Diameter: 12.8mm, Bottom Head Diameter: 19.8mm, Total Length: 21.2mm, Stem Length: 12.2mm, Stem Diameter: 7.8mm. Be suitable for Subaru B9, Forester, Legacy, Outback & Tribeca 2005 - On. OEM: 90913-0067.
- Front Bumper Clips: Head Diameter: 20mm, Stem Length: 9mm, Fits Into 7mm Hole. Retainer for Subaru Impreza, Legacy, Outback & Tribeca 2011 - 2005. OEM: 90914-0051.
- Universal fit kit - Great assortment push retainer kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainer’s replacement for Ford, GM, Chrysler, Toyota, Honda and more..Note : If the size of the earbud tips does not match the size of your ear canals or the headset is not worn properly in your ears, you may not obtain the correct sound qualities or call performance. Change the earbud tips to ones that fit more snugly in your ear
- Save time and money - You can find 240PCS automotive push type retainer kit in the box and no need to go to auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
- High quality - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
- Most common sizes - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
- Easy storage - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
SEOCONTENT-START
Bulletin Number: 12-320-21R; Revised: 04/05/23 Page 1 of 3
SERVICE INFORMATION BULLETIN
Continued…
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is ISO 14001 Compliant
ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations.
APPLICABILITY: 2020-21MY Outback SUBJECT: Front & Rear Outer Door Garnish -Design Change
NUMBER: 12-320-21R
DATE: 06/07/21
REVISED: 04/05/23 INTRODUCTION:
This Service Information Bulletin announces a design change made to the front and rear door outer garnish trim. The change involves use of high strength clips added to improve retention of the garnishes and prevent any unintentional loosening / removal caused by the user’s feet when entering and exiting the vehicle. The original clips are black in color and the newly designed clips are yellow in color. If unintentional loosing and/or removal of the outer door garnish is experienced, replaced the affected outer door garnish with the new part(s).
PRODUCTION CHANGE INFORMATION:
The new front door garnishes were incorporated into vehicle production as of starting VIN N3274236. The new rear door garnishes were incorporated into vehicle production as of starting VIN D0N3275328.
ATTENTION:
GENERAL MANAGER 0
PARTS MANAGER 0
CLAIMS PERSONNEL 0
SERVICE MANAGER 0
IMPORTANT – All
Service Personnel Should Read and Initial in the boxes provided, right.
© 2021 Subaru of America, Inc. All rights reserved. PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being
repaired. Part Description Front Door Garnish, Right Front Door Garnish, Left Rear Door Garnish, Right Rear Door Garnish, Right Rear Door Garnish, Left Rear Door Garnish,Left Part Number
91112AN04C
91112AN05B
91112AN06B
91112AN07B
91112AN56B
91112AN57B SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedure for outer door garnish replacement is unchanged. There are additional
tips listed below to assist with removal. Refer to the applicable Subaru Service Manual: Body & Electrical/WIRING SYSTEM > EXTERIOR/INTERIOR TRIM > Side Garnish & Spoiler. Additional Tips:
When removing the garnishes, ALWAYS use a suitable plastic trim removal tool. Do NOT reuse or
reinstall the Outer Door Garnish because the retaining clips are only to be used once. STEP 1) Start garnish removal by releasing CLIP A first. STEP 2) Release CLIP B second. Continued…
Bulletin Number: 12-320-21R; Revised: 04/05/23 Page 2 of 3 Bulletin Number: 12-320-21R; Revised: 04/05/23 Page 3 of 3
STEP 3) CAREFULLY pull the garnish away from door.
NOTE: No changes have been made to the current Warranty Labor Time Guide for this procedure. IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously
released information and electronic publications may be updated at any time.
• Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
• Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.