Accessory Installation Guide
| 2022MY WRX – Seat Cover – Rear (without Armest) | F411SVC000 |
Installation Instructions – WRX w/o center armrest / Instructions d’installation – WRX sans accoudoir central
PART NUMBER: F411SVC000 / NUMÉRO DE PIÈCE: F411SVC000
DESCRIPTION: SEAT COVER – Rear / DESCRIPTION: HOUSSE DE SIÈGE – Arrière
Wrap the cover around and over the top of the passenger seat.
Installer la housse du côté passager en commençant par le haut du siège.
Move center seat belt to the side, and align hole at the top of the seat as shown.
Déplacer la ceinture de sécurité centrale sur le côté et aligner les orifices du haut du siège, comme illustré.
Align all holes at the top of the seat as shown.
Aligner tous les orifices du haut du siège, comme illustré.
Mate Velcro®.
Fixer la bande Velcro®.
Fold seat down and fasten Velcro® section at the back of the seat.
Rabattre le siège et fixer la section Velcro® à l’arrière du siège.
Fold seat down and connect buckle then tighten the straps.
Rabattre le siège, boucler la boucle et serrer les courroies.
Wrap the cover around and over the top part of the driver’s seat. Align all holes at the top of the seat as shown.
Installer la housse du côté conducteur en commençant par le haut du siège. Aligner tous les orifices du haut du siège, comme illustré.
Fold seat down and fasten Velcro® section at the back of the seat.
Rabattre le siège et fixer la section Velcro® à l’arrière du siège.
Fold seat down and connect buckle and then tighten the straps.
Rabattre le siège, boucler la boucle et serrer les courroies.
Position the seat cover bottom and tuck bottom center padded inserts between the seat back and seating surface.
Mettre en place le bord inférieur de la housse et insérer les languettes centrales entre le dossier et le siège.
Wrap seat cover around the front corners of the seat. Repeat for the other side. Tuck center padded insert between seat and floor.
Tirer la housse pour couvrir les coins avant du siège. Répéter de l’autre côté. Insérer les languettes centrales entre le siège et le plancher.
Tuck all covered inserts on side edge of the seat cover into the plastic trim of the seat. Starting at the front and working your way back. Repeat for the other side.
Insérer toutes les languettes du bord latéral de la housse dans l’habillage en plastique du siège, en allant de l’avant vers l’arrière. Répéter de l’autre côté.
Tuck padded inserts between seat back and seat surface. Repeat for the other side.
Insérer les languettes entre le dossier et le siège. Répéter de l’autre côté.
Re-Install all headrests.
Réinstaller les appuie-tête.
CLEANING INSTRUCTIONS
1.Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose
cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS.
2. Rinse the cover twice (2x) in COLD to remove any residual cleaner.
3. Hang and allow to air dry.
INSTRUCTIONS DE NETTOYAGE
1.Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux
(convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS.
2.Rincer la housse à deux(2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant.
3. Suspendre et laisser sécher à l’air.
SPOTCLEANING INSTRUCTIONS
1 -Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water.
2 -Spray or sponge onto cover.
3 -Rinse with water (until no suds remain) and allow to air dry.
INSTRUCTIONS DE NETTOYAGE DES TACHES
1–Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude.
2–Vaporiser le mélange sur la housse ou l’appliquer à l’éponge.
3–Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air.
F411SVC000
- Compatible Models：Front car seat covers fit Subaru（ Outback Forester Crosstrek Legacy Impreza）
- 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- Compatible Models：Front car seat covers fit Subaru（ Outback Forester Crosstrek Legacy Impreza）
- 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- 【Compatibility】 The ventilated front seat covers fit Outback Forester Crosstrek Legacy Impreza.Includes 2 front seat covers + headrest covers, easy to install, no interference with seat adjustments.
- 【Breathable Material】Features breathable mesh + faux leather. Leather is wear-resistant, mesh is breathable and quick-drying, and faux leather is easy to clean. It resists stains and wear, avoids stuffiness after long sitting, bringing you a comfortable and refreshing driving experience.
- 【Buffering Sponge】Filled with 40-density sponge on front & back, excellent elasticity, no collapse even after long sitting. Boosts cushioning, eases waist & hip fatigue on long drives, delivers a comfortable road trip experience.
- 【Stretchable Fabric】Elastic cloth on both sides for flexible up/down pull and seat adjustment fit. Exposed areas (headrest/waist seams) with edge binding—wear-resistant, no snags, sleek finish, better fit & durability.
- 【Organized Storage】3 separate divided storage pockets on the back hold phones, tissues, car chargers & small items, keep clutter away, easy access, maintain a tidy interior for daily driving needs.
- 【Compatibility】 The ventilated front seat covers fit Outback Forester Crosstrek Legacy Impreza.Includes 2 front seat covers + headrest covers, easy to install, no interference with seat adjustments.
- 【Breathable Material】Features breathable mesh + faux leather. Leather is wear-resistant, mesh is breathable and quick-drying, and faux leather is easy to clean. It resists stains and wear, avoids stuffiness after long sitting, bringing you a comfortable and refreshing driving experience.
- 【Buffering Sponge】Filled with 40-density sponge on front & back, excellent elasticity, no collapse even after long sitting. Boosts cushioning, eases waist & hip fatigue on long drives, delivers a comfortable road trip experience.
- 【Stretchable Fabric】Elastic cloth on both sides for flexible up/down pull and seat adjustment fit. Exposed areas (headrest/waist seams) with edge binding—wear-resistant, no snags, sleek finish, better fit & durability.
- 【Organized Storage】3 separate divided storage pockets on the back hold phones, tissues, car chargers & small items, keep clutter away, easy access, maintain a tidy interior for daily driving needs.
- BRAND - Skechers
- MATERIAL - Skechers Memory Foam with Leather & Air-Cool Mesh.
- SKECHERS MEMORY FOAM - Skechers Memory Foam( car seat cover provides the ultimate comfort in seat cover performance - contouring to your body and providing pressure relief.
- LEATHER & AIR COOL MESH FABRIC - Our seat cover made of Cooling mesh top layer is incredibly smooth and breathable.
- SKECHERS BY DESIGN - Skechers automotive seat covers designed to maximize your driving comfort and offer comprehensive protection and style to the interior of your vehicle.
SEOCONTENT-START
DATE 09/30/2021 PAGE 1 OF 8 DESCRIPTION: SEAT COVER – Rear / DESCRIPTION: HOUSSE DE SIÈGE – Arrière KIT CONTENTS: / CONTENU DE LA TROUSSE: PART NUMBER: F411SVC000 / NUMÉRO DE PIÈCE: F411SVC000 Installation Instructions – WRX w/o center armrest / Instructions d’installation – WRX sans accoudoir central SUBARU OF AMERICA A Headrest Cover-Lg (x2) Headrest Cover-Sm (x1) Grande housse d’appuie-tête – (x2) Petite housse d’appuie-tête – (x1) B Seat Cover-Lg (x1) Grande housse de siège (x1) *NONE* / *AUCUN* TOOLS / MATERIALS REQUIRED: / OUTILS / MATÉRIEL REQUIS: 1 2 3 4 DATE 09/30/2021 PAGE 2 OF 8 Wrap the cover around and over the top of the passenger seat. Déplacer la ceinture de sécurité centrale sur le côté et aligner les orifices du haut du siège, comme illustré. SUBARU OF AMERICA Installer la housse du côté passager en commençant par le haut du siège. Move center seat belt to the side, and align hole at the top of the seat as shown. 5 6 7 DATE 09/30/2021 PAGE 3 OF 8 Align all holes at the top of the seat as shown. Aligner tous les orifices du haut du siège, comme illustré. SUBARU OF AMERICA Mate Velcro®. Fixer la bande Velcro®. 8 9 10 DATE 09/30/2021 PAGE 4 OF 8 SUBARU OF AMERICA Rabattre le siège, boucler la boucle et serrer les courroies. Fold seat down and connect buckle then tighten the straps. Fold seat down and fasten Velcro® section at the back of the seat. Rabattre le siège et fixer la section Velcro® à l’arrière du siège. 11 12 13 DATE 09/30/2021 PAGE 5 OF 8 SUBARU OF AMERICA Fold seat down and fasten Velcro® section at the back of the seat. Rabattre le siège et fixer la section Velcro® à l’arrière du siège. Wrap the cover around and over the top part of the driver’s seat. Align all holes at the top of the seat as shown. Installer la housse du côté conducteur en commençant par le haut du siège. Aligner tous les orifices du haut du siège, comme illustré. B 14 15 16 DATE 09/30/2021 PAGE 6 OF 8 Fold seat down and connect buckle and then tighten the straps. Rabattre le siège, boucler la boucle et serrer les courroies. SUBARU OF AMERICA Position the seat cover bottom and tuck bottom center padded inserts between the seat back and seating surface. Mettre en place le bord inférieur de la housse et insérer les languettes centrales entre le dossier et le siège. B 17 18 19 DATE 09/30/2021 PAGE 7 OF 8 SUBARU OF AMERICA Tuck padded inserts between seat back and seat surface. Repeat for the other side. Insérer toutes les languettes du bord latéral de la housse dans l’habillage en plastique du siège, en allant de l’avant vers l’arrière. Répéter de l’autre côté. Insérer les languettes entre le dossier et le siège. Répéter de l’autre côté. Wrap seat cover around the front corners of the seat. Repeat for the other side. Tuck center padded insert between seat and floor. Tirer la housse pour couvrir les coins avant du siège. Répéter de l’autre côté. Insérer les languettes centrales entre le siège et le plancher. Tuck all covered inserts on side edge of the seat cover into the plastic trim of the seat. Starting at the front and working your way back. Repeat for the other side. 20 DATE 09/30/2021 PAGE 8 OF 8 Réinstaller les appuie-tête. SUBARU OF AMERICA Re-Install all headrests. CLEANING INSTRUCTIONS 1. Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS. 2. Rinse the cover twice (2x) in COLD to remove any residual cleaner. 3. Hang and allow to air dry. INSTRUCTIONS DE NETTOYAGE 1. Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux (convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS. 2. Rincer la housse à deux (2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant. 3. Suspendre et laisser sécher à l’air. SPOT CLEANING INSTRUCTIONS 1 – Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water. 2 – Spray or sponge onto cover. 3 – Rinse with water (until no suds remain) and allow to air dry. INSTRUCTIONS DE NETTOYAGE DES TACHES 1 – Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude. 2 – Vaporiser le mélange sur la housse ou l’appliquer à l’éponge. 3 – Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.