Accessory Installation Guide
| 2019-22MY Forester Seat Cover – Front | F411SSJ020 |
Installation Instructions – FORESTER
Consignes d’installation – FORESTER
DESCRIPTION: FRONT SEAT COVER –
DESCRIPTION: HOUSSE DE SIÈGE –
TOOLS / MATERIALS REQUIRED: / OUTILS / MATÉRIEL REQUIS:
*NONE* / *AUCUN*
1
Slip the cover over the top of the headrest, then pull down headrest cover.
Glisser la housse au-dessus de l’appuie-tête, puis tirer doucement sur celle-ci.
2
Mate Velcro®
Fixer la bande Velcro®
4
Position the seat cover bottom and tuck bottom center padded inserts between the seat back and seating surface.
Mettre en place le bord inférieur de la housse et insérer les languettes centrales entre le dossier et le siège.
5
Wrap the seat cover around the front corners of the seat. Repeat for the other side.
Tirer la housse pour couvrir les coins avant du siège. Répéter de l’autre côté.
6
Tuck padded inserts on the side edge of the seat cover into the plastic trim of the seat. Starting at the front and working your way back. Repeat for the other side.
Faire rentrer le bord latéral de la housse dans la garniture de plastique de la banquette, en allant de l’avant vers l’arrière. Répéter de l’autre côté.
7
Wrap the cover around and over the top of the seat, and Align all holes at the top of the seat as shown. Repeat for the other side.
Installer la housse en commençant par le haut de la banquette, puis aligner tous les orifices du haut de la banquette, comme sur l’illustration. Répéter de l’autre côté.
8
Re-Install headrests.
Réinstaller les appuie-tête.
CLEANING INSTRUCTIONS
1.Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS.
2. Rinse the cover twice (2x) in COLD to remove any residual cleaner.
3. Hang and allow to air dry.
INSTRUCTIONS DE NETTOYAGE
1.Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux (convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS.
2.Rincer la housse à deux(2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant.
3. Suspendre et laisser sécher à l’air.
SPOTCLEANING INSTRUCTIONS
1 -Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water.
2 -Spray or sponge onto cover.
3 -Rinse with water (until no suds remain) and allow to air dry.
INSTRUCTIONS DE NETTOYAGE DES TACHES
1–Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude.
2–Vaporiser le mélange sur la housse ou l’appliquer à l’éponge.
3–Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air.
-Warning: “Donot install a child seat on the passenger seat while the seat cover is installed.”
-Avertissement: “Ne pas installer un siège de sécurité pour enfant sur le siège passager lorsque housse de siège est installée.”
F411SSJ020
2019-22MY Forester Seat Cover – Front
- Compatible Models：Front car seat covers fit Subaru
（ Outback Forester Crosstrek Legacy Impreza） - 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- 【High Compatibility】 Front seat covers engineered to fit Subaru Outback Forester Crosstrek Legacy Impreza perfectly, maintaining a smooth and snug fit during everyday driving
- 【Thickened and upgraded】Built with 5mm high-density foam—50% thicker than standard single-layer covers. Provides enhanced lumbar support for long drives, reducing fatigue from extended sitting. Maintains its shape without sagging or flattening over time
- 【Front & Back Leather Protection】The back upgrade features durable leather, replacing cheap elastic fabric for a more refined interior look. These seat covers are more stain-resistant and easier to clean—a quick wipe restores their like-new appearance, effortlessly handling daily spills and kids/ Pets' scuff marks
- 【Safe Design】Side seams utilize OEM-style weakened stitching. Upon impact,the car seat protector's seams burst open instantly , allowing side airbags to deploy without obstruction—tested for reliability
- 【3-Minute Easy Installation】Features a next-gen round lock clip + S-hook that lets one person seat cover install in just 3 minutes—no more struggling with traditional designs. The upgraded installation with anti-slip bottom grips more securely than ordinary velcro or elastic straps
- BRAND - Skechers
- MATERIAL - Skechers Memory Foam with Leather & Air-Cool Mesh.
- SKECHERS MEMORY FOAM - Skechers Memory Foam( car seat cover provides the ultimate comfort in seat cover performance - contouring to your body and providing pressure relief.
- LEATHER & AIR COOL MESH FABRIC - Our seat cover made of Cooling mesh top layer is incredibly smooth and breathable.
- SKECHERS BY DESIGN - Skechers automotive seat covers designed to maximize your driving comfort and offer comprehensive protection and style to the interior of your vehicle.
- 【SPORTY DESIGN IN RICH AND PERFECT COLORS 】Looks gorgeous and feels really nice when driving. Make your car seat looks so different than others. Get the compliments by using our car seat covers NOW.
- 【100% Waterproof Neoprene】Keep it safe from all sweat, stains, sand, odors and dog hair. Reach for your new seat protector and slip it on in seconds. Since it’s made of premium waterproof neoprene, nothing will leak through. So comfortable, you'll forget to take if off. Especially during colder days.
- 【AIRBAG COMPATIBLE】 Our front car seat covers feature a special stitching on the side allowing airbag deployment. It’s officially tested, making our covers a reliable car seat protector.
- 【EASY TO INSTALL AND CLEAN】 The best investment for your new vehicle might also be the quickest. Follow our simple 3-step installation process to install the front seat covers before finishing off with the head rest covers.
- 【PERFECTLY PROTECT THE SEAT】High Elasticity Universal Design perfectly fit the requirement of car. Fit most of vehicles, vans. Whether you have kids, pets, our high quality fabric material will protect your seats from the wear of everyday life.
- 【UPGRADED WEAR RESISTANT Polyvinyl 】 This car seat cover for the front lower part has excellent durability and water resistance. It can effectively prevent fading or wearing the original seat. The built-in high rebound sponge provides comfort for long drives.
- 【WRAP AROUND THE BOTTOM】 This bottom seat cover wraps around the front and sides to have more fully protection, so it will blend in well with original seats. The front little pocket is handy to put your phone or small items in.
- 【STAY IN PLACE】 With the non-slip gel bottom, this front seat cover will stay well in place. Durable chucks and hooks also secure seat cover.
- 【EXQUISITE TRIANGLE QUILTED LOOK】 Elegant Triangle Quilted makes your car's interior unique, and the slightly raised triangles will provide more comfort during long drives.
- 【FAIRLY EASY TO INSTALL】 By inserting the chucks into the crack between the back and bottom of the seat, securing the hooks under the front of the seat, and using the buckle to secure the long elastic band to the back of the seat, you can do it easily in about 5 minutes.
Last update on 2026-06-15 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
DATE 10/26/2021 PAGE 1 OF 4 DESCRIPTION: FRONT SEAT COVER – DESCRIPTION: HOUSSE DE SIÈGE – KIT CONTENTS: / CONTENU: PART NUMBER: / RÉFÉRENCE: Installation Instructions – FORESTER Consignes d’installation – FORESTER A Housse gd appuie-tête (x2) Housse gd appuie-tête (x2) B Housse dossier banquette Housse dossier banquette SUBARU OF AMERICA *NONE* / *AUCUN* TOOLS / MATERIALS REQUIRED: / OUTILS / MATÉRIEL REQUIS: B A A B 1 2 3 4 DATE 10/26/2021 PAGE 2 OF 4 Slip the cover over the top of the headrest, then pull down headrest cover. Mate Velcro® Position the seat cover bottom and tuck bottom center padded inserts between the seat back and seating surface. SUBARU OF AMERICA Glisser la housse au-dessus de l’appuie-tête, puis tirer doucement sur celle-ci. Fixer la bande Velcro® Mettre en place le bord inférieur de la housse et insérer les languettes centrales entre le dossier et le siège. A B 5 6 7 DATE 10/26/2021 PAGE 3 OF 4 Tuck padded inserts on the side edge of the seat cover into the plastic trim of the seat. Starting at the front and working your way back. Repeat for the other side. Wrap the seat cover around the front corners of the seat. Repeat for the other side. SUBARU OF AMERICA Wrap the cover around and over the top of the seat, and Align all holes at the top of the seat as shown. Repeat for the other side. Installer la housse en commençant par le haut de la banquette, puis aligner tous les orifices du haut de la banquette, comme sur l’illustration. Répéter de l’autre côté. Tirer la housse pour couvrir les coins avant du siège. Répéter de l’autre côté. Faire rentrer le bord latéral de la housse dans la garniture de plastique de la banquette, en allant de l’avant vers l’arrière. Répéter de l’autre côté. B B B 8 DATE 10/26/2021 PAGE 4 OF 4 SUBARU OF AMERICA Re-Install headrests. Réinstaller les appuie-tête. A CLEANING INSTRUCTIONS 1. Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS. 2. Rinse the cover twice (2x) in COLD to remove any residual cleaner. 3. Hang and allow to air dry. INSTRUCTIONS DE NETTOYAGE 1. Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux (convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS. 2. Rincer la housse à deux (2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant. 3. Suspendre et laisser sécher à l’air. SPOT CLEANING INSTRUCTIONS 1 – Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water. 2 – Spray or sponge onto cover. 3 – Rinse with water (until no suds remain) and allow to air dry. INSTRUCTIONS DE NETTOYAGE DES TACHES 1 – Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude. 2 – Vaporiser le mélange sur la housse ou l’appliquer à l’éponge. 3 – Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air. -Warning: “Do not install a child seat on the passenger seat while the seat cover is installed.” -Avertissement: “Ne pas installer un siège de sécurité pour enfant sur le siège passager lorsque housse de siège est installée.”
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.