NHTSA ID Number: 10208697
Manufacturer Communication Number: 05-75-20R
Summary
This bulletin announces a design change of the front coil spring to address a cracking-type sound coming from the suspension when turning left or right. (Crosstrek Hybrid only)
NUMBER: 05-75-20R
DATE: 02/02/22
REVISED: 02/10/22
INTRODUCTION:
This bulletin announces a design change of the front coil spring to address a cracking-type sound coming from the suspension when turning left or right. The sound is a result of interference between the front coil spring and the strut bearing. The design change increases the amount of turns in the coil spring which minimizes the area between the spring and strut bearing and eliminates the sound.
PART INFORMATION:
| Description | Part Number | Application |
| COIL SPRING-FRONT | 20330FL00C | Impreza w/ MT |
| 20330FL01C | Impreza w/ CVT | |
| 20330FL620 | Crosstrek Hybrid |
NOTE: Impreza has a turn increase from 4.2 turns to 4.4. Crosstrek Hybrid has a turn increase from 4.83 turns to 4.87. These changes have been incorporated into the 2022MY vehicle production.
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
IMPORTANT NOTE: When this condition is confirmed, it is NOT necessary to replace both front coil springs at the same time. Only replace the spring on the side where the sound is confirmed to be coming from.
The service procedure for front coil spring replacement remains unchanged. Always refer to the Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary tools, required processes and related one-time-use parts needed for a complete and lasting repair.
4 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 05-75-20R
DATE: 02/02/22
REVISED: 02/10/22
MC-10208697-0001.pdf 1046.573KB
NHTSA ID Number: 10208511
Manufacturer Communication Number: 05-75-20
Summary
This bulletin announces a design change of the front coil spring to address a cracking-type sound coming from the suspension when turning left or right.
1 Associated Document
Manufacturer Communications
NUMBER: 05-75-20
DATE: 02/02/22
MC-10208511-0001.pdf 1038.786KB
- Works on Most Vehicles: This heavy-duty spring compressor tool set by Orion Motor Tech repairs bent and damaged parts and performs the necessary suspension maintenance on the MacPherson struts and springs found in most small and medium-sized cars
- Secure Compression: Acme-threaded rods ensure a firm grip on springs, while built-in detent pins securely lock them in place, providing reliable, non-slip compression for safe and precise work
- Wide Compatibility: Working with your manual or power tool's 1/2-inch square drive or 13/16-inch hex sockets, our Acme rods and end pieces offer a 10.5" range, wider than the competition to work with more vehicles
- Built to Last: Our pair of heavy-duty strut spring compressors boasts high durability and corrosion resistance under even punishing use thanks to their heat-treated steel construction, black oxide finish along the threaded rods, and zinc-coated heads
- Compact & Portable: This hock spring compressor tool set comes with a blow-molded case, keeping parts organized and easy to carry, store, and access, so you're always prepared for your next repair job
- Double-Retention Anti-Drop System: This strut spring compressor kit features dual-protection safety with interlocking hook jaws and a secure locking mechanism. Its adjustable safeguard brace prevents accidental spring release under load and ensures parallel operation of removable tool components at all times
- Premium Material: Our coil spring compressor tool is constructed from 45# carbon steel. The rugged frame minimizes flexing, bending, and warping even under high tension, each pair of the spring compressor tool can withstand a load of up to 2645 lbs (1200 kg)
- Wide Application: An ideal solution for various vehicles, including trucks under 3 tons and large sedans. Avoid strut compressors with flimsy hooks that cause slippage or safety hazards. Compatible with springs 0–0.8 inches (0–20mm) in diameter. Verify spring size before use
- Product Information: This heavy-duty spring compressor tool has a wide jaw capacity of 2.7-10.6 inches (70-270 mm) and an adjustable holder suitable for coil diameters of 8.6-12.2 inches (220-310 mm). Fits straight springs only; tapered springs not compatible
- Easy to Use: The screw compressor securely grips springs by rotating the easy-to-use hex nut. Use a 19mm hex socket or wrench. Always apply grease to threads before use. (Ensure even pressure on both sides — uneven force may cause tool detachment.)
- Premium Material: The Macpherson strut spring compressor structure is equipped with heat-treated forcing hooks and hardened center screws, which are very hard, non bending, and have maximum strength and service life.
- Excellent Design: The spring removal tool adopts a heavy duty threaded rod to achieve large spring contact , quickly providing tremendous support force for your operation. Our McPherson strut spring compressor offers a adjustable range of 10.5inches. The built-in stop pin locks the coil spring in place to safely and easily compress the spring.
- Tools to Work Together: The strut spring compressor tool can be used with a 3/4 "or 19mm socket and a ratchet to rotate the spindle to compress the strut spring, safely removing the fastening nut securing the socket. The automative strut compressor tool allows manual or electric tools to compress the spring permanently and smoothly on or off the vehicle.
- Safer & Simple Use: All you need to do is prepare thread lubricant, fully attach the bracket to the spring, tighten the tool, and then remove the strut. A strut spring compressor tool that can be operated by one person, very fast and convenient. This package comes with a high-quality storage box to help store tools safely!
- Wide Application: The strut spring compression tool set applys to compressing the coil springs on the McPherson strut assembly, helping to replace Macpherson struts, shock absorbers, and springs, as well as repairing bent struts, strut tubes, and damaged parts.
- SPECIALTY TOOL: Coil Spring Compressor removes and installs straight or curved springs made of wire up to 3/4 inch diameter
- SAFE: Designed for the safe and efficient removal and installation of most automotive coil spring suspensions
- TOUGH: Made to last with Chrome Vanadium Steel arms, precision built to meet or exceed ANSI standards for a lifetime of use
- COMES IN: Heavy duty blow molded case to keep kit protected and organized
- EASY TO READ: Includes detailed instruction with usage photos
- Assists in removal and installation of front shock absorber springs and nuts on many domestic vehicles Works on "Double D" shape shock shaft stems Carry case includes usage photos and instructions Meets or exceeds ANSI standards EASY TO READ: Includes detailed instruction with usage photos
- Assists in removal and installation of front shock absorber springs and nuts on many US made vehicles
- Works on "Double D" shape shock shaft stems
- Carry case includes usage photos and instructions
SEOCONTENT-START
Bulletin Number: 05-75-20R; Revised: 02/10/22 Page 1 of 2 Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru
Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 05-75-20R DATE: 02/02/22 REVISED: 02/10/22 APPLICABILITY: 2017-19MY Impreza 2021MY Crosstrek Hybrid SUBJECT: Front Coil Spring- Design Change to Address Cracking Sound from Front Suspension INTRODUCTION: This bulletin announces a design change of the front coil spring to address a cracking-type sound coming from the suspension when turning left or right. The sound is a result of interference between the front coil spring and the strut bearing. The design change increases the amount of turns in the coil spring which minimizes the area between the spring and strut bearing and eliminates the sound. Interference Area COIL SPRING-FRONT BEARING-FRONT STRUT PART INFORMATION: Description Part Number Application COIL SPRING-FRONT 20330FL00C Impreza w/ MT 20330FL01C Impreza w/ CVT 20330FL620 Crosstrek Hybrid NOTE: Impreza has a turn increase from 4.2 turns to 4.4. Crosstrek Hybrid has a turn increase from 4.83 turns to 4.87. These changes have been incorporated into the 2022MY vehicle production. SERVICE BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2020 Subaru of America, Inc. All rights reserved. Bulletin Number: 05-75-20R; Revised: 02/10/22 Page 2 of 2 Continued… REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. IMPORTANT NOTE: When this condition is confirmed, it is NOT necessary to replace both front coil springs at the same time. Only replace the spring on the side where the sound is confirmed to be coming from. The service procedure for front coil spring replacement remains unchanged. Always refer to the Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary tools, required processes and related one-time-use parts needed for a complete and lasting repair. WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru Added Security Classic or Gold plan, this repair may be submitted using the following claim information: Labor Description Labor Operation # Labor Time Fail Code FRONT STRUT OVERHAUL- ONE B611-201 0.7 FRONT STRUT OVERHAUL- BOTH B611-204 1.1 NAD-25 *FOUR WHEEL ALIGNMENT C611038 1.4 *C101108 SUBLET REPAIR, ADMINISTRATION EXPENSES 0.3 Can be claimed to cover dealer administration expenses when subletting the Alignment. IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.