Accessory Installation Guide
| 2022MY WRX Shift Boot （WRX RED | J1310VC624 |
Installation Manual
Shift Boot （WRX RED）（Ultrasuede ）
Genuine Part Number ：J1310VC624 Shift Boot （WRX RED）
Applicable Vehicle Model ：WRX （2022MY～）
Installation procedure
Caution ：Remove the ground terminal from the battery before handling electrical components.
Reference：Set the shift lever to “N” position before disconnecting the negative terminal of
the battery. Move the seat to the front most position before removing the negative
terminal of the battery.
1. Remove Tray ASSY Center Lower.
（1）Remove the Shift Lever（Figure 1）
（2）Remove the Tray ASSY Center Lower （Figure 2）
（3）Remove the Mat from the Tray ASSY Center Lower（Figure 3）
Caution
When removing parts, be careful not to damage the joint portion.
Advice
Tray ASSY Center Lower is fixed at 8 places by clips. You can easily remove it by inserting your hand from the top of the boot to the front side (arrow portion), and hooking your hand on the part to pull it up.
2. The installation shall be completed by restoring the packaged Tray ASSY Center Lower in the reverse order of removal.
Maintenance Method
Maintenance of Ultrasuede Shift Boot
Regular cleaning about once a month is recommended.
Wipe the entire Shift Boot with a clean cloth soaked in lukewar m water of about 40℃ and squeezed firmly.
※Ultrasuede is a registered trademark of Toray Industries, Inc.
Cleaning of dirt
If you spill the liquid, lightly apply tissue paper to absorb it. If the dirt cannot be removed, follow the procedure below.
① Lightly soak a cloth in a solution diluted with a neutral detergent to a concentration of 5% to 10%, and squeeze it tightly, then wipe the Shift Boot wit h the cloth by sliding from top to bottom while pressing the Shift Boot down. (See figure below).
② Lightly soak a soft cloth in lukewarm water of approx. 40 ℃, squeeze it tightly, and wipe the Shift Boot with the cloth by sliding from top to bottom while pressing the Shift Boot down. Rinse the cloth with lukewarm water and repeat this procedure 3 times to remove the mild detergent.
J1310VC624
- Perfect Fit for 2015-2021 Subaru WRX – Designed to replace the factory shift boot and e-brake boot with precise fitment, ensuring a seamless OEM+ upgrade. Plastic trim not included.
- High-End Feel – Made with Premium Microsuede Fabric, delivering luxurious texture, durability, and a motorsport-inspired aesthetic.
- Laser Cut with Precision Twin-Needle Stitching – Each boot features expertly stitched seams for a clean, OEM+ appearance that enhances your interior.
- Multiple Color Stiching Available – Personalize your WRX interior with multiple stitching colors, perfectly matching your build’s theme.
- Engineered and produced in Lancaster, PA. Made in U.S.A.
- VEHICLE FITMENT: Compatible with Subaru Impreza Non STI 2016 2017 2018 2019 2020 2021
- Made from high-quality automotive-grade leather for durability, flexibility, and a clean OEM-style interior appearance
- Precision-cut shift & handbrake boot cover designed to fit the factory shifter frame for a professional, factory-correct look
- Ideal replacement for torn, cracked, or faded original shift and e-brake boots—upgrades the shift boot cover
- EASY INSTALLATION: Direct replacement boot cover; reuse original plastic frame/retainer (not included).
- Perfect Fit for 2022+ Subaru WRX Manual – Designed to replace the factory shift boot with precise fitment for 6-speed manual transmissions, ensuring a seamless OEM+ upgrade. Plastic trim not included.
- High-End Feel – Made from Genuine Alcantara material, delivering luxurious texture, durability, and a motorsport-inspired aesthetic.
- Laser Cut with Precision Twin-Needle Stitching – Each boot features expertly stitched seams for a clean, OEM+ appearance that enhances your interior.
- Multiple Color Stiching Available – Personalize your WRX interior with multiple stitching colors, perfectly matching your build’s theme.
- Engineered and produced in Lancaster, PA. Made in U.S.A.
- 【Superior Quality】: This shift boot cover is crafted from high-quality polyester fabric that ensures exceptional durability and elasticity. Its smooth and soft surface enhances user comfort, making it resistant to repeated wear and tear without cracking or fraying.
- 【Waterproof & Dustproof】: This dust cover effectively keeps dust, debris and liquids out of sensitive vehicle parts. The waterproof polyester material provides reliable protection and ensures the proper functioning of the gearshift even in the event of an accidental spill.
- 【Aesthetic Decoration】: With its simple and elegant appearance, this gearshift cover effectively enhances the aesthetics of your vehicle's interior. Its glossy surface adds a sophisticated touch to your car, expressing your personality while enhancing driving experience.
- 【Installation Process】: The flexible design makes the installation process easy and requires without tools. Simply remove the head of the shift lever, slide the dust cover over the lever, adjust and secure it in alignment with the frame, and finally install the shift lever head.
- 【Wide Compatibility】: This shift boot cover is compatible with most manual and automatic vehicles. Measuring 10.63×8.66 inches, it is suitable for sedans, SUVs, trucks, and more. The design also allows for trimming to ensure a better fit for your gear shift lever.
- Durable Material: The car shift boot cover is made of excellent suede, resistant to wear and tear, soft and comfortable to the touch. Double thread stitching design, firm and tear resistant, aging resistant, ensures maximum strength and durability, can accompany and serve you for a long time.
- Universal Size: The diameter of the inner ring at the top is about 1.5 cm/0.59 inch, and the diameter of the bottom is about 28 cm/11 inch, which is suitable for most manual/automatic cars. It is cuttable and can be adjusted slightly as needed if it is large.
- Dustproof and Dirtproof: I believe your gearbox needs it very much, long time use will lead to dust accumulation, and it is hard to clean the multiple crevices of the gearbox, our cover can effectively block dust, debris and water damage, and provide protection for the gearbox.
- Easy to Install: It is very easy to install, just remove the gear knob, then install the shift boot cover, and then insert the gear knob back in. It is very quick to install or remove, easy for you to clean it, and it is quick to dry. (It is recommended not to use sharp brushes to scrub oh)
- Fashionable and Beautiful: Classic common design and appearance, exquisite sewing process, so that this shift boot cover looks very beautiful and generous. It is the best replacement for old model covers, easily matching the interior decorative style of the car, ensuring coordination and consistency.
SEOCONTENT-START
Shift Boot （WRX RED） （Ultrasuede ） Installation Manual Part Name Shift Boot 1 No. ① ！ J1310VC624 Shift Boot （WRX RED） WRX （2022MY～） Genuine Part Number ： Applicable Vehicle Model ： Component Part Advice For Installation Operator Precautions Installation completion drawing Qty 1.For safety, stop the vehicle on a flat surface and turn off the engine and ensure that the parking brake is applied before starting the installatio n process. 2.Since connectors have to be detached and attached during the installation process, make sure to disconnect the power cord of battery (-) negative si de before handling electrical components. Follow the instructions of the latest service manual for the removal and installation of the (-) negative side cord. 3.When installing this part, be careful enough not to scratch t he vehicle or parts with tools. 4.Follow the instructions marked with in th e “Installation Procedure” from the next section onward. The things that should be followed and useful to know for this product, are marked with in this manual. This manual describes how to install and handle the Shift Boot. Before installation, please read this manual for proper install ation. After installation, be sure to hand this manual to the customer . Caution Advice １ △00 Ultrasuede is a registered trademark of Toray Industries, Inc. Manufacturer CORPORATION ① Shift Boot ２ Installation procedure 1. Remove Tray ASSY Center Lower. （1）Remove the Shift Lever（Figure 1） （2）Remove the Tray ASSY Center Lower （Figure 2） （3）Remove the Mat from the Tray ASSY Center Lower（Figure 3） When removing parts, be careful not to damage the joint portion. Mat Tray ASSY Center Lower Tray ASSY Center Lower Shift lever ”N” position Shift Lever Caution ：Remove the ground terminal from the battery before handling electrical components. Reference：Set the shift lever to “N” position before disconnecting the negative terminal of the battery. Move the seat to the front most position before removing the negative terminal of the battery. Caution Tray ASSY Center Lower is fixed at 8 places by clips. You can easily remove it by inserting your hand from the top of the boot to the front side (arrow portion), and hooking your hand on the part to pull it up. Advice 2. The installation shall be completed by restoring the packaged Tray ASSY Center Lower in the reverse order of removal. Figure 1 Figure 2 Figure 3 3 Revision history Maintenance Method ■Maintenance of Ultrasuede Shift Boot ● Cleaning of dirt Wiping direction Wiping direction Regular cleaning about once a month is recommended. Wipe the entire Shift Boot with a clean cloth soaked in lukewar m water of about 40℃ and squeezed firmly. ※Ultrasuede is a registered trademark of Toray Industries, Inc. If you spill the liquid, lightly apply tissue paper to absorb i t. If the dirt cannot be removed, follow the procedure below. ① Lightly soak a cloth in a solution diluted with a neutral det ergent to a concentration of 5% to 10%, and squeeze it tightly, then wipe the Shift Boot wit h the cloth by sliding from top to bottom while pressing the Shift Boot down. (See figure b elow). ② Lightly soak a soft cloth in lukewarm water of approx. 40 ℃, squeeze it tightly, and wipe the Shift Boot with the cloth by sliding from top to bottom whi le pressing the Shift Boot down. Rinse the cloth with lukewarm water and repeat this procedure 3 times to remove the mild detergent. △ Content Issue Date 00 Newly Established 2022.3.25 ※
SEOCONTENT-END
This product presentation was made with AAWP plugin.