Accessory Installation Guide
| 2024MY Crosstrek Rear Seat Cover (w/o Center Armrest) | F411SFL070 |
Installation Instructions – CROSSTREK /
Consignes d’installation – CROSSTREK
PART NUMBER: F411SFL070 / RÉFÉRENCE: F411SFL070
DESCRIPTION: SEAT COVER – Rear /
DESCRIPTION: HOUSSE DE SIÈGE – Arrière
1
2
3
Wrap the cover around and over the top of the passenger seat. Align all holes at the top of the seat as shown.
Installer la housse du côté passager en commençant par le haut du siège. Aligner tous les orifices du haut du siège, comme illustré.
4
Align all holes at the top of the seat as shown.
Aligner tous les orifices du haut de la banquette, comme sur l’illustration.
5
Fasten Velcro® sections at the back of the seat.
Fixer les 3 bandes Velcro® à l’arrière de la banquette.
6
Connect buckle and then tighten the straps.
Boucler la boucle et serrer les courroies.
7
8
Wrap the cover around and over the top part of the driver’s seat. Align all holes at the top of the seat as shown.
Installer la housse du côté conducteur en commençant par le haut de la banquette. Aligner tous les orifices du haut de la banquette, comme sur l’illustration.
9
10
11
Position the seat cover and tuck bottom center inserts between the seat back and seating surface.
Mettre la housse en place et insérer les bords inférieurs centraux entre le dossier et le siège.
12
Wrap seat cover around the front corners of the seat. Repeat for the other side.
Tirer la housse pour couvrir les coins avant du siège. Répéter de l’autre côté.
13
Tuck side edge of seat cover into the plastic trim of the seat, starting at the front and working your way to the back. Repeat for the other side.
Insérer le bord latéral de la housse dans la garniture de plastique de la banquette, en allant de l’avant à l’arrière. Répéter de l’autre côté.
14
Repeat for other side.
Répéter de l’autre côté.
15
Réinstaller les appuie-tête.
Réinstaller les appuie-tête.
CLEANING INSTRUCTIONS
1. Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose
cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS.
2. Rinse the cover twice (2x) in COLD to remove any residual cleaner.
3. Hang and allow to air dry.
INSTRUCTIONS DE NETTOYAGE
1. Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage
doux
(convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS.
2. Rincer la housse à deux (2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant.
3. Suspendre et laisser sécher à l’air.
SPOT CLEANING INSTRUCTIONS
1 – Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water.
2 – Spray or sponge onto cover.
3 – Rinse with water (until no suds remain) and allow to air dry.
INSTRUCTIONS DE NETTOYAGE DES TACHES
1 – Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude.
2 – Vaporiser le mélange sur la housse ou l’appliquer à l’éponge.
3 – Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air.
F411SFL070
DATE 10/26/2022
- Compatible Models：Front car seat covers fit Subaru
（ Outback Forester Crosstrek Legacy Impreza） - 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- Compatible Models：Front car seat covers fit Subaru（ Outback Forester Crosstrek Legacy Impreza）
- 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- BRAND - Skechers
- MATERIAL - Skechers Memory Foam with Leather & Air-Cool Mesh.
- SKECHERS MEMORY FOAM - Skechers Memory Foam( car seat cover provides the ultimate comfort in seat cover performance - contouring to your body and providing pressure relief.
- LEATHER & AIR COOL MESH FABRIC - Our seat cover made of Cooling mesh top layer is incredibly smooth and breathable.
- SKECHERS BY DESIGN - Skechers automotive seat covers designed to maximize your driving comfort and offer comprehensive protection and style to the interior of your vehicle.
- 【Compatibility】 The ventilated front seat covers fit Outback Forester Crosstrek Legacy Impreza.Includes 2 front seat covers + headrest covers, easy to install, no interference with seat adjustments.
- 【Breathable Material】Features breathable mesh + faux leather. Leather is wear-resistant, mesh is breathable and quick-drying, and faux leather is easy to clean. It resists stains and wear, avoids stuffiness after long sitting, bringing you a comfortable and refreshing driving experience.
- 【Buffering Sponge】Filled with 40-density sponge on front & back, excellent elasticity, no collapse even after long sitting. Boosts cushioning, eases waist & hip fatigue on long drives, delivers a comfortable road trip experience.
- 【Stretchable Fabric】Elastic cloth on both sides for flexible up/down pull and seat adjustment fit. Exposed areas (headrest/waist seams) with edge binding—wear-resistant, no snags, sleek finish, better fit & durability.
- 【Organized Storage】3 separate divided storage pockets on the back hold phones, tissues, car chargers & small items, keep clutter away, easy access, maintain a tidy interior for daily driving needs.
- 【High Compatibility】 Front seat covers engineered to fit Subaru Outback Forester Crosstrek Legacy Impreza perfectly, maintaining a smooth and snug fit during everyday driving
- 【Thickened and upgraded】Built with 5mm high-density foam—50% thicker than standard single-layer covers. Provides enhanced lumbar support for long drives, reducing fatigue from extended sitting. Maintains its shape without sagging or flattening over time
- 【Premium Leather Front & Back Panels】 Our front seat covers feature upgraded leather on both the front and back panels, replacing the traditional elastic fabric backing for a more premium interior appearance. The durable leather surface helps resist stains and makes cleaning easier—just wipe away spills, dirt, and daily scuff marks from kids or pets
- 【Safe Design】Side seams utilize OEM-style weakened stitching. Upon impact,the car seat protector's seams burst open instantly , allowing side airbags to deploy without obstruction—tested for reliability
- 【3-Minute Easy Installation】Features a next-gen round lock clip + S-hook that lets one person seat cover install in just 3 minutes—no more struggling with traditional designs. The upgraded installation with anti-slip bottom grips more securely than ordinary velcro or elastic straps
SEOCONTENT-START
D Panel Cover (x2) / Couvercles de panneau (x2) DATE 10/26/2022 PAGE 1 OF 7 SUBARU OF AMERICA A Headrest Cover-Lg (x2) Headrest Cover-Sm (x1) Grandes housses d’appuie-tête – (x2) Petites housses d’appuie-tête – (x1) B Seat Cover-Lg (x1) Grande housse de siège (x1) *NONE* / *AUCUN* TOOLS / MATERIALS REQUIRED: / OUTILS / MATÉRIEL REQUIS: DESCRIPTION: SEAT COVER – Rear / DESCRIPTION: HOUSSE DE SIÈGE – Arrière KIT CONTENTS: / CONTENU: PART NUMBER: F411SFL070 / RÉFÉRENCE: F411SFL070 Installation Instructions – CROSSTREK / Consignes d’installation – CROSSTREK 1 2 3 4 DATE 10/26/2022 PAGE 2 OF 7 SUBARU OF AMERICA Align all holes at the top of the seat as shown. Aligner tous les orifices du haut de la banquette, comme sur l’illustration. Wrap the cover around and over the top of the passenger seat. Align all holes at the top of the seat as shown. Installer la housse du côté passager en commençant par le haut du siège. Aligner tous les orifices du haut du siège, comme illustré. B B 5 6 7 DATE 10/26/2022 PAGE 3 OF 7 Connect buckle and then tighten the straps. Fasten Velcro® sections at the back of the seat. Fixer les 3 bandes Velcro® à l’arrière de la banquette. SUBARU OF AMERICA Boucler la boucle et serrer les courroies. B 8 9 10 DATE 10/26/2022 PAGE 4 OF 7 SUBARU OF AMERICA Wrap the cover around and over the top part of the driver’s seat. Align all holes at the top of the seat as shown. Installer la housse du côté conducteur en commençant par le haut de la banquette. Aligner tous les orifices du haut de la banquette, comme sur l’illustration. B 11 12 13 DATE 10/26/2022 PAGE 5 OF 7 Tuck side edge of seat cover into the plastic trim of the seat, starting at the front and working your way to the back. Repeat for the other side. Insérer le bord latéral de la housse dans la garniture de plastique de la banquette, en allant de l’avant à l’arrière. Répéter de l’autre côté. SUBARU OF AMERICA Tirer la housse pour couvrir les coins avant du siège. Répéter de l’autre côté. Wrap seat cover around the front corners of the seat. Repeat for the other side. Position the seat cover and tuck bottom center inserts between the seat back and seating surface. Mettre la housse en place et insérer les bords inférieurs centraux entre le dossier et le siège. B B B 14 15 DATE 10/26/2022 PAGE 6 OF 7 SUBARU OF AMERICA Réinstaller les appuie-tête. Réinstaller les appuie-tête. Repeat for other side. Répéter de l’autre côté. B DATE 10/26/2022 PAGE 7 OF 7 SUBARU OF AMERICA CLEANING INSTRUCTIONS 1. Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS. 2. Rinse the cover twice (2x) in COLD to remove any residual cleaner. 3. Hang and allow to air dry. INSTRUCTIONS DE NETTOYAGE 1. Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux (convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS. 2. Rincer la housse à deux (2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant. 3. Suspendre et laisser sécher à l’air. SPOT CLEANING INSTRUCTIONS 1 – Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water. 2 – Spray or sponge onto cover. 3 – Rinse with water (until no suds remain) and allow to air dry. INSTRUCTIONS DE NETTOYAGE DES TACHES 1 – Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude. 2 – Vaporiser le mélange sur la housse ou l’appliquer à l’éponge. 3 – Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.