Accessory Installation Guide
| 2024MY Impreza & RS Mud Flaps | J101SFN500 |
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION
PART NUMBER
NUMERO DE PIECE
DESCRIPTION Impreza & -RS Mud Flaps
DESCRIPTION Garde-Boue: Impreza et -RS
J101SFN500
EDITION A
JUN 06, 2022
- Subaru Genuine Mud Flap Kit
- J101SVC100
- 2022 2023 2024 2025 2026 WRX
- Help protect your WRX paint finish from chips and the undercarriage from rust and corrosion.
- Genuine Subaru Mud Flaps are designed to serve as a protective barrier between the tires and wheel well to minimize water, dirt and mud spray and to help prevent minor road debris from kicking up behind your vehicle
- Genuine Subaru Mud Flap kit
- J101SFN600
- Crosstek Wilderness 2024 2025 2026
- Helps protect paint finish from stones and road grime
- Set of four. All hardware included.
- 【Matching Models】The mud flaps are meticulously crafted to seamlessly integrate with the Subaru Forester models from 2019 to 2024, offering a tailored fit that enhances the vehicle's aesthetics. Please kindly verify compatibility prior to purchase. (NOT for 2025 Forester)
- 【Ultimate Defense】Equipped with splash guards, your car is fortified against scratches, abrasions, and harm caused by flying mud and debris. They act as a barrier, deflecting dirt and gravel, thus mitigating noise, protecting the engine from impacts, and preserving your vehicle's pristine condition.
- 【Tough & Versatile】Made from strong ABS material, these mud flaps are flexible, rust-resistant, and long-lasting. They can handle extreme temperatures from -50°C to 100°C, making them perfect for any harsh condition.
- 【Crash-Resistant 】Unlike ordinary hard plastic, powerty mud flaps embody both flexibility and robustness. They retain their shape even at high speeds, ensuring lasting durability and dependable performance, providing an unbreakable protective barrier for your vehicle.
- 【Effortless Installation】No drilling or tape required. Simply screw our front and rear mud flap set seamlessly into your car's existing mounting points, ensuring a secure fit without harming your vehicle's paintwork.
- Perfect Fit: Specifically designed for 2026 Subaru Outback, these mud flaps ensure a seamless, factory-like fit. Please double-check your vehicle’s compatibility before purchase for a flawless installation.
- Superior Protection Against Debris: Shield your vehicle from mud, rocks, and road debris with our high-quality splash guard. They act as a barrier to prevent scratches, paint damage, and engine wear, keeping your vehicle looking pristine.
- Durable & Weather-Resistant: Made from premium ABS material, these mud guards are built to last. They resist rust, withstand extreme temperatures (-50°C to 100°C), and remain flexible in harsh conditions, ensuring long-term durability.
- Easy Installation: With all the necessary mounting hardware included, no more drilling required, these mud flaps can be easily installed on both the front and rear of your vehicle.
- 100% Satisfaction Service: Backed by Vvwmluui’s 1-year return and exchange policy and 24/7 customer support. If you’re not completely satisfied, contact us via your Amazon account, and we’ll resolve your issue within 24 hours.
- 【Custom fit for Subaru Outback 2021-2025】 Our No Drill Mud Flaps for 2021-2025 Subaru Outback are super easy to install, ideal for DIY lovers. Custom fit for Outback Base/Premium/Limited/Touring/Onyx Edition/Limited XT/Touring XT/Onyx Edition XT Models, with a snug fit that won’t loosen during driving; important reminder: Not compatible with Wilderness models, or vehicles equipped with running boards, please confirm your car model before buying.
- 【No Drill Hassle-Free Installation】 Designed for easy DIY installation with no drilling or cutting required—utilizes factory pre-drilled holes and includes all necessary hardware + step-by-step instructions. Save time and protect your Outback’s body, perfect for both enthusiasts and beginners.
- 【All-Round Mud & Debris Protection】 The front and rear mud flap set creates a reliable barrier to stop mud, dirt, rocks and road salt from damaging your Subaru Outback’s paint, wheels and undercarriage, reduce subsequent maintenance costs.
- 【OEM-Style Textured Black & Durable Quality】 Crafted with premium textured black material, replicating the OEM look for a seamless factory-installed appearance. Resists cracking, fading, and deformation, maintaining long-lasting performance in all weather conditions.
- 【4-Piece Front & Rear Full Protection】 Comes with 2 front + 2 rear mud guards for complete coverage. Effectively blocks mud, rocks, gravel, and road debris from splashing onto your Outback’s paint, undercarriage, and wheels—ideal for daily commutes, off-roading, or long drives.
SEOCONTENT-START
ISSUE DATE SUBARU OF AMERICA PAGE EDITION A JUN 06, 2022 1/3 J101SFN500 INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION DESCRIPTION Impreza & -RS Mud Flaps DESCRIPTION PART NUMBER NUMERO DE PIECE Garde-Boue: Impreza et -RS Seulement pour Impreza Seulement pour Impreza RS KIT CONTENTS: CONTENU DE L’ENSEMBLE REMOVE Enlever INSTALL Installer TOOLS REQUIRED: OUTILS REQUIS MEANING OF CHARACTERS: SIGNIFICATION DES SYMBOLES DISCARD Jeter / recycler NOTE: Mud flaps will decrease vehicle ground clearance. Use caution when driving over obstacles such as curbs and when entering automatic car washes. REMARQUE: Les garde-boue réduisent la garde au sol du véhicule. Soyez prudent lorsque vous franchissez des obstacles tels que des bordures de trottoir et lorsque vous entrez dans les OVER-TIGHTENING THE SCREWS IS NOT ADVISED AS THIS MAY CAUSE THE MUD-FLAP TO LOCALLY DEFORM. lave-autos automatiques. IL EST DÉCONSEILLÉ DE TROP SERRER LES VIS CAR CELA POURRAIT DÉFORMER LOCALEMENT LE GARDE-BOUE. SUBARU 0 E FRONT ASSEMBLY ASSEMBLAGE AVANT F ~ x6 ~ Wipe clean Essuyer x2 Only for lmpreza ….,. __ N x2 Only for lmpreza RS G REAR ASSEMBLY ASSEMBLAGE ARRIERE C H D J K f •9 x4 x4 x2 0 L I x 2 Crear Left Side o e Arriere Gauche == <P2mm 3/32″ ~ <Plmm 9/32″ ~ <P8mm 5/1/T x2 x2 M R~~r Right Side Cote Arriere Droit J101SFN500 INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION DESCRIPTION Impreza & -RS Mud Flaps DESCRIPTION PART NUMBER NUMERO DE PIECE Garde-Boue: Impreza et -RS ISSUE DATE SUBARU OF AMERICA PAGE EDITION A JUN 06, 2022 2/3 1 3 5 4 Front Installation 2 Installation a l’avant Wipe clean Essuyer Spoiler Impreza RS Trim Packages require additional Panel Thickness: Pushpin “N” should be used instead of Pushpin “F” on RS variants Les ensembles de garnitures Impreza RS nécessitent une épaisseur de panneau supplémentaire : La punaise “N” doit être utilisée à la place de la punaise “F” sur les variantes RS This instruction shows pictures for Impreza -RS version has spoiler Cette instruction montre des images pour Impreza -La version RS a un spoiler Only for Impreza RS Seulement pour Impreza RS 1. Turn wheel to gain access to drill location 2. Drill two holes 2mm (3/32″) through use premark on 14mm (9/16″) depth max 3. Re-drill to 7mm (9/32″) two holes up to 14mm (9/16″) depth max 1. Tournez la roue pour accéder à l’emplacement de la perceuse 2. Percez deux trous 2 mm (3/32”) à travers l’utilisation de la prémarque sur une profondeur maximale de 14 mm (9/16”) 3. Re-percez à 7 mm (9/32”) deux trous jusqu’à 14 mm (9/16”) de profondeur max SUBARU • — ~ _J • -,_-___ J ~ □ (/) (/) (/) (/) □ ,—– 1 I \\~~~ I I I I I ,,_……._ J101SFN500 INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION DESCRIPTION Impreza & -RS Mud Flaps DESCRIPTION PART NUMBER NUMERO DE PIECE Garde-Boue: Impreza et -RS ISSUE DATE SUBARU OF AMERICA PAGE EDITION A JUN 06, 2022 3/3 8 10 9 11 6 Rear Installation 7 Installation a l’arriere Wipe clean Essuyer Screw torque: 0.5 – 0.75 Nm (4.5~6.5 in-lb) Screw torque: 0.5 – 0.75 Nm (4.5~6.5 in-lb) Couple de serrage des vis: 0,5 à 0,75 N.m (4,5 à 6,5 po-lb) Couple de serrage des vis: 0,5 à 0,75 N.m (4,5 à 6,5 po-lb) Repeat steps for the other side of the vehicle Reprendre les memes etapes l’autre cote de vehicle 1. Turn wheel to gain access to drill location 2. Drill two holes 2mm (3/32″) through use premark on 14mm (9/16″) depth max 3. Re-drill to 8mm (5/16″) two holes up to 14mm (9/16″) depth max 1. Tournez la roue pour accéder à l’emplacement de la perceuse 2. Percez deux trous 2 mm (3/32”) à travers l’utilisation de la prémarque sur une profondeur maximale de 14 mm (9/16”) 3. Re-percez à 8 mm (5/16”) deux trous jusqu’à 14 mm (9/16”) de profondeur max Optional Subaru Accessory may require the use of nut “O” and bolt “H” L’accessoire Subaru en option peut nécessiter l’utilisation d’un écrou “O” et d’un boulon “H” SUBARU~——— □ r°’·r 1-· ~,~ I O { I I (/) — – _________ I (/) (/) G I I If l ____ j 0 H ~ I._____ __ ___.I I._____ __ ___.I
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.