Accessory Installation Guide
| 2024MY Impreza – SPLASH GUARD FRONT ASSEMBLY (Sport) | J101SFN200 |
PART NUMBER: J101SFN200
Installation Instruction
IMPREZA SPLASH GUARD FRONT ASSEMBLY
1.
BE SURE TO REMOVE THE PUSH RIVETS FROM MUD GUARD AND REUSE THE TOP
2.
BE SURE TO REMOVE THE PUSH RIVET AT BOTTOM
3.
CLEAN THE MUD GUARD AND FENDER
4.
AFTER REMOVING THE PUSH RIVIETS MOVE ASIDE THE MUDGUARD
5.
MOVE THE J-CLIPS IN THE FENDER IN THE GIVEN DIRECTION
6.
MOVE THE SPLASH GUARD IN THE GIVEN DIRECTION TO FIX IN MUD GUARD AND FENDER
7.
MAKE SURE THAT PUSH RIVET IS FIXED
8.
PRESS THE SPLASH GUARD TOWARDS THE VEHICLE TO ELIMINATE THE GAP BY TIGHTENING THE SCREWS MAKE SURE ALL ARE TIGHTENING.
REPEAT THE STEPS FOR THE RH SIDE OF THE VEHICLE
REAR ASSEMBLY
1.
BE SURE TO REMOVE THE PUSH RIVETS FROM MUD GUARD
2.
BE SURE TO REMOVE THE PUSH RIVET AT BOTTOM
3.
CLEAN THE MUD GUARD AND BUMPER
4.
MOVE THE U-CLIPS IN THE BUMPER IN THE GIVEN DIRECTION
5.
MOVE THE SPLASH GUARD IN THE GIVEN DIRECTION TO FIX IN THE MUD GUARD, BUMPER AND LOWER PANEL
6.
MAKE SURE THAT PUSH RIVET IS TIGHTENING
7.
PRESS THE SPLASH GUARD TOWARDS THE VEHICLE TO ELIMINATE THE GAP BY TIGHTENING THE BOLTS AND PUSH RIVETS
REPEAT THE STEPS FOR THE RH SIDE OF THE VEHICLE
J101SFN200
- Subaru
Genuine Splash Guard Kit - J101SSL000
- Helps protect paint finish from stones and road grime
- Forester (non wilderness) 2025 2026
- All hardware and installation instructions included. Set of 4
- Custom Fit---Each mud guard is made of high-precision models and fits perfectly. It is one of the essential accessories for 2024-2026 Subaru Crosstrek Base/Premium/Sport/Limited.(Note: Not fit Crosstalk Wilderness)
- Great Protector---Provide good protection for the exterior and chassis of your vehicle. Prevents sand, mud, rocks, liquids and other materials from being thrown all around while the vehicle is moving and the tires are rotating at high speed.
- High-grade Materials---Made of thermoplastic polymer, anti-collision, anti-deformation and anti-wear, and can withstand harsh environments from -40° to 100°C.
- Durable & Impact-resistant---Our mud flaps are thicker, stronger, and more durable than the cheap hard plastic. So that they can maintain their shape at high speeds and effectively prevent tire splashing and have long life service.
- Easy Installation---No drilling needed, just fix them directly in the original car hole with screws without damaging the original car paint surface.
- Subaru Genuine Splash Guard Kit
- J101SSL300
- Helps protect paint finish from stones and road grime
- Forester Wilderness 2026
- All hardware and installation instructions included. Set of 4
- Subaru Genuine Splash Guard Kit
- J101SFN300
- Crosstrek Wilderness 2024 2025 2026
- Helps protect paint finish from stones and road grime.
- Set of 4
- 【Custom fit for Subaru Forester 2025-2026】 Our No Drill Mud Flaps for 2025-2026 Subaru Forester are super easy to install, ideal for DIY lovers. Custom fit for Forester Base Premium Sport Limited Touring Hybrid Models, with a snug fit that won’t loosen during driving. Please confirm your car model before buying. ( Does not fit Wilderness model & vehicles with running boards )
- 【NO Drill Hassle-Free Installation】 Designed for easy DIY installation with no drilling or cutting required—utilizes factory pre-drilled holes and includes all necessary hardware + step-by-step instructions. Save time and protect your Subaru Forester’s body, perfect for both enthusiasts and beginners.
- 【All-Round Mud & Debris Protection】 The front and rear mud flap set creates a reliable barrier to stop mud, dirt, rocks and road salt from damaging your Subaru Forester’s paint, wheels and undercarriage, reduce subsequent maintenance costs.
- 【OEM-Style Textured Black & Durable Quality】 Crafted with premium textured black material, replicating the OEM look for a seamless factory-installed appearance. Resists cracking, fading, and deformation, maintaining long-lasting performance in all weather conditions.
- 【4-Piece Front & Rear Full Protection】 Comes with 2 front + 2 rear mud guards for complete coverage. Effectively blocks mud, rocks, gravel, and road debris from splashing onto your Subaru Forester’s paint, undercarriage, and wheels—ideal for daily commutes, off-roading, or long drives.
Last update on 2026-05-26 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
PAGE-01 NOTICE TOOLS REQUIRED: IMPREZA SPLASH GUARD FRONT ASSEMBLY Installation Instruction 2 1 M6 BOLT X 4 J NUT CLIP X 4 PUSH RIVET(25J4) X 2 5 4 3 NOTE:7mm for Rear,8mm for Front PART NUMBER: J101SFN200 1. PAGE-02 NOTICE BE SURE TO REMOVE THE PUSH RIVETS FROM MUD GUARD AND REUSE THE TOP 2. BE SURE TO REMOVE THE PUSH RIVET AT BOTTOM NOTICE 3. PAGE-03 NOTICE CLEAN THE MUD GUARD AND FENDER 4. AFTER REMOVING THE PUSH RIVIETS MOVE ASIDE THE MUDGUARD NOTICE PAGE-04 NOTICE 5. 4 MOVE THE J-CLIPS IN THE FENDER IN THE GIVEN DIRECTION 4 4 6. PAGE-05 MOVE THE SPLASH GUARD IN THE GIVEN DIRECTION TO FIX IN MUD GUARD AND FENDER NOTICE 7. PAGE-06 PUSH UP AND IN WHILE TIGHTNING NOTICE 5 MAKE SURE THAT PUSH RIVET IS FIXED 8. 3 Screw Torque 3 PRESS THE SPLASH GUARD TOWARDS THE VEHICLE TO ELIMINATE THE GAP BY TIGHTENING THE SCREWS MAKE SURE ALL ARE TIGHTENING. NOTICE PUSH IN 5 3 3 9. PAGE-07 FINAL LOOK REPEAT THE STEPS FOR THE RH SIDE OF THE VEHICLE NOTICE PAGE-08 REAR ASSEMBLY Installation Instruction 2 1 M4.8 BOLT X 4 U CLIP X 4 PUSH RIVET (495216) X 4 PUSH RIVET(2N95) X 4 4 5 6 3 1. PAGE-09 NOTICE BE SURE TO REMOVE THE PUSH RIVETS FROM MUD GUARD 2. BE SURE TO REMOVE THE PUSH RIVET AT BOTTOM NOTICE 3. PAGE-10 NOTICE CLEAN THE MUD GUARD AND BUMPER 4. 4 4 MOVE THE U-CLIPS IN THE BUMPER IN THE GIVEN DIRECTION NOTICE 4 4 5. PAGE-11 MOVE THE SPLASH GUARD IN THE GIVEN DIRECTION TO FIX IN THE MUD GUARD, BUMPER AND LOWER PANEL NOTICE 6. . PAGE-12 NOTICE PUSH IN MAKE SURE THAT PUSH RIVET IS TIGHTENING 5 5 7. PAGE-13 NOTICE 3 6 PUSH IN 3 Screw Torque PRESS THE SPLASH GUARD TOWARDS THE VEHICLE TO ELIMINATE THE GAP BY TIGHTENING THE BOLTS AND PUSH RIVETS 6 3 8. PAGE-14 NOTICE FINAL LOOK REPEAT THE STEPS FOR THE RH SIDE OF THE VEHICLE PAGE 1 AVIS OUTILS REQUIS : ENSEMBLE DE PARE-ÉCLABOUSSURE AVANT IMPREZA Instructions d’installation 2 1 BOULON M6 X 4 ATTACHE À ÉCROU EN J X 4 RIVET À PRESSION (25J4) X 2 5 4 3 REMARQUE : 7 mm pour l’arrière, 8 mm pour l’avant NUMÉRO DE PIÈCE : J101SFN200 Déplacer Déplacer Retirer Installer Mettre au rebut Couple de serrage Mettre de côté 1. PAGE 2 AVIS ASSUREZ-VOUS DE RETIRER LES RIVETS À PRESSION DU GARDE-BOUE ET DE RÉUTILISER LA PARTIE SUPÉRIEURE 2. ASSUREZ-VOUS DE RETIRER LE RIVET À PRESSION DE LA PARTIE INFÉRIEURE AVIS 3. PAGE 3 AVIS NETTOYEZ LE GARDE-BOUE ET L’AILE 4. APRÈS AVOIR RETIRÉ LES RIVETS À PRESSION, METTEZ LE GARDE-BOUE DE CÔTÉ AVIS PAGE 4 AVIS 5. DÉPLACEZ LES ATTACHES EN J DANS L’AILE DANS LE SENS INDIQUÉ 44 44 6. PAGE 5 DÉPLACEZ LE PARE- ÉCLABOUSSURE DANS LE SENS INDIQUÉ POUR FIXER LE GARDE- BOUE ET L’AILE AVIS 7. PAGE 6 POUSSEZ VERS LE HAUT ET VERS L’INTÉRIEUR TOUT EN SERRANT AVIS 5 ASSUREZ-VOUS QUE LE RIVET À PRESSION EST FIXÉ 8. Couple de serrage des vis 3 APPUYEZ SUR LE PARE-ÉCLABOUSSURE VERS LE VÉHICULE POUR SUPPRIMER L’ÉCART EN SERRANT LES VIS POUR VOUS ASSURER QUE TOUT EST BIEN SERRÉ. AVIS POUSSEZ 5 3 3 9. PAGE 7 APPARENCE FINALE RÉPÉTEZ LES ÉTAPES POUR LE CÔTÉ DROIT DU VÉHICULE AVIS PAGE 8 ENSEMBLE ARRIÈRE Instructions d’installation 2 1 ATTACHE EN U X 4 BOULON M4.8 X 4 RIVET À PRESSION(495216)X4 RIVET À PRESSION (2N95) X 4 RIVET À PRESSION (495216) X 4 Mettre de côté Déplacer Déplacer Retirer Installer Mettre au rebut Couple de serrage 1. PAGE 9 AVIS ASSUREZ-VOUS DE RETIRER LES RIVETS À PRESSION DU GARDE-BOUE 2. ASSUREZ-VOUS DE RETIRER LE RIVET À PRESSION DE LA PARTIE INFÉRIEURE AVIS 3. PAGE10 AVIS NETTOYEZ LE GARDE-BOUE ET LE PARE-CHOCS 4. 4 4 DÉPLACEZ LES AGRAFES EN U DANS LE PARE-CHOCS DANS LE SENS INDIQUÉ 4 4 4 5. PAGE11 DÉPLACEZ LE PARE-ÉCLABOUSSURE DANS LE SENS INDIQUÉ POUR LE FIXER DANS LE GARDE-BOUE, LE PARE-CHOCS ET LE PANNEAU INFÉRIEUR AVIS 6. PAGE12 AVIS ASSUREZ-VOUS QUE LE RIVET À PRESSION EST BIEN SERRÉ 5 POUSSEZ 7. PAGE13 AVIS 3 6 POUSSEZ 3 Couple de serrage des vis APPUYEZ SUR LE PARE-ÉCLABOUSSURE VERS LE VÉHICULE POUR SUPPRIMER L’ÉCART EN SERRANT LES BOULONS ET LES RIVETS À PRESSION 3 6 3 8. PAGE14 AVIS APPARENCE FINALE RÉPÉTEZ LES ÉTAPES POUR LE CÔTÉ DROIT DU VÉHICULE
SEOCONTENT-END
This product presentation was made with AAWP plugin.