NHTSA ID Number: 10234854
Manufacturer Communication Number: 1516013R
Summary
Poor Fit of Seat Back Protector
NUMBER: 15-160-13R
DATE: 03/18/13
REVISED: 05/08/13
| APPLICABILITY: | 2013 MY Outback with seat back protector |
| SUBJECT: | Poor Fit of Seat Back Protector |
INTRODUCTION
The 2013 MY Outback has a rear seat back protector available as an accessory. This seat back protector is used along with a cargo tray to protect the back of the rear seats when cargo is loaded into the cargo area when the rear seats are folded down.
When the rear seats are folded up, there is a natural tendency for the seat back protectors to slightly pull away for the rear seat back. This is a natural condition and does not indicate a problem with the installation of the rear seat back protector.
If the seat back protector buckles outward from the rear seat back excessively, please make sure the seat back protector is installed properly. A seat back protector that is installed too low on the rear seat back will interfere with a bracket in between the cargo area floor and the rear seats. This interference causes the seat back protector to buckle when the seats are folded upright.
Check the distance from the top edge of the seat back protector to the point of transition between the rear seat back material and the seat fabric. If the top edge of the seat back protector is not at the right distance from the transition between seat back and seat materials, remove the clips from the seat back protector and reinstall.
Place tray in position and use awl to make holes in the seat back material in all 5 grommet locations.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| SUBARU | OUTBACK | 2013 |
1 Associated Document
Manufacturer Communications
NUMBER: 15-160-13R
DATE: 03/18/13
REVISED: 05/08/13
MC-10234854-9999.pdf 1567.37KB
NHTSA ID Number: 10233449
Manufacturer Communication Number: 1516013
Summary
Poor Fit of Seat Back Protector
1 Associated Document
Manufacturer Communications
NUMBER: 15-160-13
DATE: 03/18/13
MC-10233449-9999.pdf 1556.046KB
- Thick & Durable Protection – Keep Your Car Seats Looking New: Siivton car seat protector is made of extra-thick, high-density padding that provides excellent cushioning and prevents indentations, scratches, and wear caused by child car seats, booster seats, or heavy gear
- Secure & Stable – Triple Anti-Slip Design: Designed with a non-slip mesh backing, anti-slip tab that tucks into seat creases, and an adjustable headrest strap, this seat protector stays firmly in place — even during bumpy rides or frequent in-and-outs
- ISOFIX Compatible – Smart Design for All Car Seats: Features convenient cutouts on both sides to ensure seamless installation of ISOFIX or LATCH-equipped child safety seats without interfering with seat anchors or safety features
- Kid-Friendly Storage – 2 Mesh Pockets for Easy Access: Built-in mesh pockets at the bottom offer handy storage for toys, snacks, bottles, or wipes — keeping your back seat organized and your child entertained on long drives
- Fits Most Vehicles – For Leather & Fabric Seats: Universal fit for most car, SUV, or truck seats. Compatible with both leather and fabric interiors, offering full back seat coverage while maintaining your car’s clean, premium look
- Compatible Models：Front car seat covers fit Subaru（ Outback Forester Crosstrek Legacy Impreza）
- 2026 New Edition: Featuring thicker foam padding and heavier faux leather seat covers, delivering a smoother surface and enhanced support for the same premium look as pictured
- Easy Installation:Innovative quick-install design allows most users to complete cover installation in approximately 3 minutes. Ensures no shifting during driving or getting in/out of the vehicle
- Durable & Protective Leatherette:Effortlessly handles seat scratches, daily wear and tear, pet claw marks, and liquid spills. Simply wipe away everyday stains to keep it looking as good as new
- Classic Style Design:Ideal for protecting new car seats or restoring old ones. Effectively prevents wear and fading of original upholstery while giving your older vehicle a fresh new look
- ✓ All-Time Protection - Our Back Seat Protector will ensure that your seat remains in perfect condition by protecting leather or upholstery from muddy little feet that bring along with them dirt and mud! Gone will be the days of traveling with a less than perfect car interior.
- 【Protect Seat from Infant Booster Imprint】- Carseat seat protectors is made of 600D fabric and PVC leather.Thickened padding, good resilience. Installed under the baby safety seat to protect back seat against wear and tear, effectively extend the life of the car seat
- 【Waterproof and Easy to Clean】- Meolsaek seat protector carseat made of high-quality Oxford fabric, can use a damp cloth to wipe off dirt caused by food spills or pet saliva. Protect the leather and cloth fabric car sea, save worry and effort
- 【Dense Non-slip Back Dots, Won't Slip】- with Adjustable straps, Car seat protector is very firmly fixed on the car seat, , which can firmly tie the seat cover to the headrest. This car seat cover has anti-dense non-slip points on the back for better grip, whether it is the back seat or front seat of the car, it can fit well
- 【Not Easy to Fade & Not Stain the Seat】- After careful comparison and selection, the back anti slip dots the car seat protectors are made of light-colored bumps, which are safe and heat-resistant, not easy to fade, No need to worry about soiling the light leather seats in summer
- 【Carseat Protectors for Vehicles】- Large car seat protective comfortably covers front and back car seats . The backrest: 23.6 x19 inch, the seat:18.5 x 19 inch, the mesh is 15 x 8.5 inch. The pockets in the bottom for storing your child’s toys, books, and treats. It is a good product for the whole family to travel or people's daily essentials
- Rear Seat Back Protector
- Genuine Subaru Part Number: J501SFN240
- Crosstrek (non wilderness) (non-hybrid) 2024 2025 2026
- Provides additional protection to the rear seatbacks when lowering the seats to transport larger cargo
- Use in conjunction with the Cargo Tray (Sold Seperatly).
SEOCONTENT-START
Bulletin Number: 15-160-13R; Date: 05/08/13 Page 1
INTRODUCTION
The 2013 MY Outback has a rear seat back protector available as an accessory. This seat back
protector is used along with a cargo tray to protect the back of the rear seats when cargo is loaded into
the cargo area when the rear seats are folded down.
When the rear seats are folded up, there is a natural tendency for the seat back protectors to slightly
pull away for the rear seat back. This is a natural condition and does not indicate a problem with the
installation of the rear seat back protector.
If the seat back protector buckles outward from the rear seat back excessively, please make sure the
seat back protector is installed properly. A seat back protector that is installed too low on the rear seat
back will interfere with a bracket in between the cargo area floor and the rear seats. This interference
causes the seat back protector to buckle when the seats are folded upright.
NUMBER: 15-160-13R
DATE: 03/18/13
REVISED: 05/08/13
APPLICABILITY: 2013 MY Outback with seat back protector
SUBJECT: Poor Fit of Seat Back Protector
SERVICE BULLETIN
ATTENTION:
GENERAL MANAGER q
PARTS MANAGER q
CLAIMS PERSONNEL q
SERVICE MANAGER q
IMPORTANT – All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles, or
to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how
to do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
SUBARU OF AMERICA, INC. IS
“ISO 14001 COMPLIANT”
The international standard for excellence
in Environmental Management Systems.
Please recycle or dispose of automotive
products in a manner that is friendly to our
environment and in accordance with all
local, state and federal laws and regulations.
Typical seat back protector fit Poor appearance of seat back protector due
to improper installation
Continued…
Bulletin Number: 15-160-13R; Date: 05/08/13 Page 2
Continued…
Check the distance from the top edge of the seat back protector to the point of transition between
the rear seat back material and the seat fabric. If the top edge of the seat back protector is not at the
right distance from the transition between seat back and seat materials, remove the clips from the seat
back protector and reinstall.
For proper placement of the rear seat back protector, make sure the
recommended placement in the installation instruction is followed.
Place tray in position and use awl to make holes in the seat back material in all 5 grommet locations.
x5
A
Transition between carpet
and seat material
Maintain equal distances
between edge of seats
and tray
Rear seats folded
down
Seat
material
Transition between
seat back material
and seat material
Rear seat
back
material
Rear seat back
protector
2 1/2″ – 2 3/4″
2-1/2″ – 2-3/4″
Bulletin Number: 15-160-13R; Date: 05/08/13 Page 3
Seat back protector installed too low. Dimension
from transition between seat back material and
seat material to top edge of seat back protector
must be between 2 1/2″ and 2 3/4″
Transition between seat back material
and seat material.
Remove clips from seat back
Reinstall seat back protector so that the
top edge is the correct height from the
transition point
Transition between seat back material
and seat material
Continued…
Bulletin Number: 15-160-13R; Date: 05/08/13 Page 4
WARRANTY / CLAIM INFORMATION
For vehicles within the Basic New Car Limited Warranty period, this repair may be claimed using the
following information:
LABOR DESCRIPTION LABOR
OPERATION #
FAIL
CODE
LABOR
TIME
Rear Seat Back Protector R&R, ONE or BOTH A063-803 ZOQ-03 0.2
SEOCONTENT-END
This product presentation was made with AAWP plugin.