Accessory Installation Guide
| 2025MY Forester Rear Gate Inset Lettering | J1210SL100 |
| J1210SL110 |
Rear Gate Inset Lettering
Handling Manual
Installation Manual
Thank you very much for purchasing a genuine Subaru
Rear Gate Inset Lettering.
REQUESTS
1. Before using this product, please read this manual and always handle the product in an appropriate manner.
2. Please keep these instructions on hand at all times.
3. To avoid mistakes during installation, please have this product installed at a Subaru dealer or at a shop designated by a Subaru dealer.
Precautions for Handling
1. If the product gets dirty, do not attempt to clean it using hard objects such as a scrub brush or wax containing compounds (polishing powder), as this may damage the surface. Wipe with a cloth dampened with water, then wipe with a soft, dry cloth.
For Installation Personnel
This manual describes how to install and handle the Rear Gate Inset Lettering.
REQUESTS
1. Be sure to read this manual prior to installation to ensure proper installation of this product.
2. After installation of this product is complete, be sure to give this manual to the customer.
Precautions for Installation
1. Before installing the Rear Gate Inset Lettering, switch off the vehicle’s ignition and securely apply the parking brake.
2. Before installation, wipe off any dirt, oil, etc. from the vehicle in the area where the product will be installed.
3. Working in cold temperatures (15°C or below) will reduce the adhesive strength of the Rear Gate Inset Lettering. Warm the Rear Gate Inset Lettering and the installation surface with a dryer before affixing the Rear Gate Inset Lettering.
4. Make sure the Rear Gate Inset Lettering is securely affixed.
5. Refrain from washing the vehicle for 24 hours after installing the Rear Gate Inset Lettering, as this may cause it to peel off. In the event of rainy weather, store the vehicle in a place where it will not be exposed to rain.
Tools Used
Cleaning agent, cloth, resin ruler
The cleaning agent should be alcohol-based (IPA: isopropyl alcohol) or nonane.
J1210SL100
- ✪ GIVE YOUR TRUCK SOME HEAT: Change the feel and appearance of your vehicle, without the high costs.
- ✪ MADE TO LAST: Our tailgate letters are made of high quality 1/16" ABS Plastic with VHB adhesive tape. Make letters stronger and durable. These letters Inserts Compatible with 2025 Subaru Forester Models
- ✪ EASY TO INSTALL: Easy DIY installation, with reference to the provided instructions. Only take only minutes to install thistailgate insert on your truck. Make sure to clean the area before installation and they won't come off!
- ✪ OEM DESIGN: These letters fit ontop the original grill with adhesive
- ✪ PRECISELY LASER CUT IN THE USA
- ✪ GIVE YOUR CAR SOME HEAT: Change the feel and appearance of your vehicle, without the high costs.
- ✪ MADE TO LAST: Our tailgate letters are made of high quality 1/16" ABS Plastic with VHB adhesive tape. Make letters stronger and durable. These letters Inserts Compatible with 2025 Subaru Forester Models
- ✪ EASY TO INSTALL: Easy DIY installation, with reference to the provided instructions. Only take only minutes to install thistailgate insert on your truck. Make sure to clean the area before installation and they won't come off!
- ✪ OEM DESIGN: These letters fit ontop the original grill with adhesive
- ✪ PRECISELY LASER CUT IN THE USA
- Premium Material: The car emblem letter sticker is made of ABS material, which has good durability and can maintain its own shape in daily use without deformation. In addition, stickers made of this material have a smooth surface, presenting a sharp texture that can blend well with the surface of the car, enhancing overall coordination. In addition, this material also has a certain degree of wear resistance, which can maintain a good appearance even in long-term contact with the outside world.
- Vast Compatibility: Each 3D letter sticker is approximately 2.2–2.5cm (0.86–0.98") in height and 0.11" in thickness. It is suitable for most vehicle models on the market, including sedans, trucks, SUVs, and more. Its design allows it to adhere well to multiple vehicle locations, such as the sides, rear, or other areas. Besides, the product's color and glossiness complement various vehicle exteriors without appearing out of place, meeting the decorative needs of multiple vehicle types.
- Smooth Installation: These car emblem letter stickers are easy to install and use. Before installation, clean the vehicle surface where the stickers will be applied to ensure there is no dust. Then peel the letter stickers off the paper, align them with the desired position, and gently place them on the surface. Press firmly with your hand to ensure the stickers adhere fully to the vehicle surface. No complex tools are required, allowing for quick and easy vehicle decoration.
- Attractive & Self-Created: The 3D design of these car emblem letter stickers makes the letters, numbers, and symbols stand out more prominently when applied to the vehicle, adding a unique style to it. In addition, they support DIY creation, allowing you to combine different patterns, text, or information according to personal preferences to create a personalized vehicle appearance. This enables the vehicle to stand out among others, meeting diverse needs for vehicle decoration.
- Package Contents: The package contains two sets of car emblem letter stickers, each set containing 40 pieces, including 26 letters, 10 numbers, and 4 symbols. The design of the two sets can serve as a backup, providing more options when adjusting decoration schemes. They can also be shared with friends in need, allowing more people to experience the fun of decorating vehicles, and the ample quantity can meet the decoration needs of multiple parts of the vehicle.
- Genuine OEM
- High quality
- Dependability
- ✪ GIVE YOUR TRUCK SOME HEAT: Change the feel and appearance of your vehicle, without the high costs.
- ✪ MADE TO LAST: Our tailgate letters are made of high quality 1/16" ABS Plastic with VHB adhesive tape. Make letters stronger and durable. These letters Inserts Compatible with 2025 Subaru Forester Models
- ✪ EASY TO INSTALL: Easy DIY installation, with reference to the provided instructions. Only take only minutes to install thistailgate insert on your truck. Make sure to clean the area before installation and they won't come off!
- ✪ OEM DESIGN: These letters fit ontop the original grill with adhesive
- ✪ PRECISELY LASER CUT IN THE USA
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
1
Thank you very much for purchasing a genuine Subaru Rear Gate Inset Lettering.
This manual describes how to install and handle the Rear Gate Inset Lettering.
1. Before using this product, please read this manual and always handle the product
in an appropriate manner.
2. Please keep these instructions on hand at all times.
3. To avoid mistakes during installation, please have this product installed at a
Subaru dealer or at a shop designated by a Subaru dealer.
1. If the product gets dirty, do not attempt to clean it using hard objects such as a
scrub brush or wax containing compounds (polishing powder), as this may damage the
surface. Wipe with a cloth dampened with water, then wipe with a soft, dry cloth.
1. Before installing the Rear Gate Inset Lettering, switch off the vehicle’s ignition and
securely apply the parking brake.
2. Before installation, wipe off any dirt, oil, etc. from the vehicle in the area where
the product will be installed.
3. Working in cold temperatures (15°C or below) will reduce the adhesive strength of the
Rear Gate Inset Lettering. Warm the Rear Gate Inset Lettering and the installation
surface with a dryer before affixing the Rear Gate Inset Lettering.
4. Make sure the Rear Gate Inset Lettering is securely affixed.
5. Refrain from washing the vehicle for 24 hours after installing the Rear Gate Inset
Lettering, as this may cause it to peel off. In the event of rainy weather, store the
vehicle in a place where it will not be exposed to rain.
Rear Gate Inset Lettering Handling Manual
Installation Manual
REQUESTS
For Customers
For Installation Personnel
Precautions for Handling
Precautions for Installation
1. Be sure to read this manual prior to installation to ensure proper installation
of this product.
2. After installation of this product is complete, be sure to give this manual to
the customer.
REQUESTS
△00
Distributor Co., Ltd.
Revision Details
△ Description Date
Tools Used
Cleaning agent, cloth, resin ruler
The cleaning agent should be alcohol-based (IPA: isopropyl alcohol) or nonane.
2
Before Installing the Lettermark
①
Component Names
①
No. Item Name
Rear Gate Inset Lettering 1 1
J1210SL100 J1210SL110
Do not tear the perforation
until just before placing the
Rear Gate Inset Lettering
on the vehicle.
The composition of the ①
Rear Gate Inset Lettering
is shown in the diagram on
the right. The application
film is used when
installing the Rear Gate
Inset Lettering on the
vehicle and should not be
removed prior to
installation.
❸
❷
Among the letters that make
up “F O R E S T E R”,
there are two each of the
letter “R” and the letter
“E”. To prevent incorrect
placement of the letters, a
notch has been cut into the
application film and
release paper of the second
“E” and “R” to distinguish
them from the other
letters.
❶
Release paper (red)
Rear Gate Inset Lettering &
two-sided tape
Perforation
Application film
(surface protection film)
(clear)
3
Perforation
Installation Instructions
Thoroughly degrease the recessed lettering
area of the ①Rear Gate Inset Lettering
installation surface ( F O R E S T E R )
with a degreasing agent, etc.
(1)
Press down firmly on the application film so
that the ①Rear Gate Inset Lettering is
securely adhered to the application film.
(2)
Remove only one letter at the perforation,
peel off the release paper, and hold the
application film side with both hands.
(3)
Application film
Press down firmly
[①Rear Gate Inset Lettering surface side]
CAUTION
・Avoid touching the adhesive side of the
①Rear Gate Inset Lettering with your
fingers. This can cause a decrease in the
strength of the adhesive.
・Be sure to remove the next letter at the
perforation only after affixing the
letter before it.
Separating all of the letters from one
another at the perforation can lead to
incorrect placement of the letters.
Application film
Release paper
4
[After affixing]
①Rear Gate Inset Lettering
Affix the ①Rear Gate Inset Lettering so
that the spaces between the letters and the
recessed vehicle lettering are even, then
press down firmly on the letters over the
application film.
Affix the letters using pressure of 49N or more.
(4)
Remove the application film from each
letter of the ①Rear Gate Inset Lettering.
(6)
Repeat steps (3) and (4) with the remaining
letters, affixing the ①Rear Gate Inset
Lettering so that the spaces between the
letters and the recessed vehicle lettering
are even, then press down firmly on the
letters over the application film.
Affix the letters ❶-❽ in numerical order.
Be sure to check for the presence of notches on
❸ & ❽ and ❹ & ❼ to ensure that they get
placed in their respective proper locations.
While they are the same letters, each letter is
specifically designed to fit the shape of the
vehicle, so please make sure to place them
correctly.
[①Rear Gate Inset Lettering]
[Recessed vehicle lettering with the ①Rear Gate Inset
Lettering affixed]
(5)
❶ ❷ ❸ ❹
❺ ❻ ❼ ❽
❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽
CAUTION
CAUTION
[Cross-section]
Affix the letters so that the spaces between the
letters and recessed vehicle lettering are even.
Recessed vehicle lettering
Curvature
starting point
Reference dimensions
(2.0mm)
①Rear Gate Inset Lettering
Resin ruler
[Measurement points]
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.