Accessory Installation Guide
2022+ MY WRX – CD PLAYER INSTALLATION INSTRUCTION | H0010VC785 |
CD PLAYER INSTALLATION INSTRUCTION
TOOLS USED
Philips screwdriver, Flathead screwdriver, Clip remover, Trim removal tool, Nose pliers, Nipper, Cutter knife, Plastic tape, Curing tape
PRECAUTIONS
• Please refer to the precautions below before you begin work, in order to install the product safely and accurately
Please also refer to the vehicle Service manual.
• This manual shows typical installation procedures on LHD vehicle. Installation will be mirror image for RHD vehicles.
H0010VC785
- Multi-functional CD Player: 1.Desktop CD Player, 2.Bluetooth 5.0 HiFi Speaker, 3. FM Radio, 4.TF card Music Player, 5.USB Flash Drive Player, 6. 3.5mm Audio Player. Support CD, CD-G, MP3, WMA.
- Bluetooth CD Player: Built-in dual Hi-Fi Bluetooth speakers, which can be connected with Bluetooth-enabled devices such as mobile phone or tablet. It will work as a wired speaker. NOTICE: It's a Bluetooth transmitter and receiver
- Desktop Design: Desktop design with update also can as a Bluetooth transmitter, one plays all multiple functions of remote control. Easy to stand on the desk without Assembly or other support.
- Wired Speaker: Connect the CD player to other external wired devices such as mobile, tablet or laptop via 3.5mm male-to-male audio cable, it will work as a wired speaker. (Notice: Remote control does not included batteries)
- Great Gift: This Gueray CD Player is a perfect gifts for everyone. It supports remote control within 5 meters, A-B repeat, suitable for language learning, prenatal education / antenatal training, early education, FM radio broadcast.
- Simple & Stylish – Large buttons, top dials, and backlit LCD for easy use. Portable, compact design fits any space—perfect for home, shop, or on-the-go music.
- Crisp Stereo Sound – Dual 3" front-firing speakers deliver clear, balanced stereo sound, with 5 EQ modes for customized audio effects.
- Top-Loading CD Player – Plays CDs, CD-R/RWs, CD-G, audiobooks, and MP3/WMA discs, with shuffle, repeat, and resume functions for flexible playback.
- FM Radio – Digital FM tuner with 30 station presets for news, talk, and music programming. Note: AM not supported.
- Bluetooth Wireless – Enjoy wireless playback from your smartphone, tablet, or laptop. Note: No transmitter function.
- Top-Loading Portable CD Player – This boombox CD player supports CD, CD-R, and CD-RW playback, letting you enjoy all your favorite albums on a classic yet modern portable CD boombox.
- Stereo Sound with Powerful Speakers – Features two 2.25” high-output stereo speakers and 2.4 watts RMS power with a 120Hz–12kHz frequency response, delivering rich and immersive sound in a compact CD player boombox.
- Programmable CD Memory & Playback Functions – The portable CD player with radio includes 20-track programmable memory, skip, and search functions for customizable listening and easy control of your music.
- AM/FM Radio Boombox – Built-in AM/FM radio tuner ensures clear reception of local stations, making this the perfect CD boombox with radio for versatile entertainment at home or on the go.
- LED Display & Portable Design – Stylish backlit LED display makes it easy to view track information. The lightweight design makes this retro portable boombox ideal for bedrooms, classrooms, and outdoor gatherings.
- 【Multifunctional portable CD player】ZYOKATA portable CD player features CD, Bluetooth 5.1, dual stereo speakers, USB disk playback, TF card playback, 3.5mm Aux & headphone jack, FM radio, timer, dust cover and remote control, etc. The CD function is widely compatible with CD, CD-R, CD -RW, MP3, WMA and other five CD formats.
- 【Bluetooth CD Player】Built-in dual stereo speakers with two-way Bluetooth 5.1 (transmit + receive) stable connection, long transmission range, low power consumption. Transmits audio to Bluetooth headphones/speakers, or works as a Bluetooth speaker to receive music from your phone/tablet.
- 【Desktop design】 ZYOKATA portable CD player has a 75-degree angle desktop design, no assembly required, placed on the desktop not only saves space but also can be used as a stand-up speaker to play music.
- 【Flexible Power】Powers via outlet or power bank (USB port) enjoy music anywhere, anytime. Comes with a remote control switch freely between all playback modes from your couch. Effortless control at your fingertips.
- 【Great present】 Portable CD player can be the best present for children, the elderly and friends, the use of a wide range of scenarios, not only in the function of your needs, there is a nostalgic memories of childhood.
- Multi-Function CD Players for Home: Support CD/ CD Bluetooth transmitter/ USB/ Bluetooth/ FM radio mode, with remote controls,3.5mm,AUX,S/PDIF Prot
- Speakers-Bass Boost: Sound quality is enhanced by a fully sealed wooden cabinet, and the remote control allows for one-touch bass boosting and bass lowering to increase treble settings
- Bluetooth Input and Output: It supports receiving external Bluetooth devices in CD mode to listen to your favorite CD music, or you can use the wooden small CD player as a Bluetooth speaker
- Top-Loading CD Player: The appearance is a scaled-down version of a record player, but it is a multifunctional all-in-one CD music player. Compact design, portable. It is corded powered device
- Easy to use: top opens to hold CDs, toggle switch, voice mode alert, rotary volume button, easy to understand buttons. Make it easy to use for the elderly and children
Last update on 2026-06-11 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
1 2
3 4
CD PLAYER INSTALLATION INSTRUCTION
COMPONENTS 6MT
●CD PLAYER 6MT H0010VC765
●FITTING KIT 6MT H0010VC710
No. Name Qty
1 CD PLAYER 1
2 Relay harness 1
3 Cable tie 10
4 Urethane sheet 2
Applicable model Genuine component number
H0010VC785
204-0444-01
WRX(6MT) 2022MY~
WRX(CVT) 2022MY~ H0010VC775
△ 1
5 6
7 8 9
0 !
No. Name Qty
5 Panel deck 1
6 Pocket (for deck) 1
7 Mat 1
8 Truss screws (M5x6) 4
9 Screws (M5x16) 6
0 Bracket RH 1
! Bracket LH 1
PF3982AD, PF3982AE, PF3982BD, PF3982BE -1-
-2-
1 2
3
TOOLS USED
Philips screwdriver, Flathead screwdriver, Clip remover, Trim removal tool, Nose pliers, Nipper, Cutter knife,
Plastic tape, Curing tape
COMPONENTS CVT
●CD PLAYER CVT H0010VC755
●FITTING KIT CVT H0010VC700
No. Name Qty
1 CD PLAYER 1
2 Relay harness 1
3 Cable tie 10
No. Name Qty
4 Panel deck 1
5 Pocket (for deck) 1
6 Mat 1
7 Truss screws (M5x6) 4
8 Screws (M5x16) 4
9 Plastic clips 6
0 Spring nuts 4
! Bracket RH 1
@ Bracket LH 1
4 5
6 7 8
9 0
! @
-3-
PRECAUTIONS
• Please refer to the precautions below before you begin work, in order to install the product safely and accurately
Please also refer to the vehicle Service manual.
• This manual shows typical installation procedures on LHD vehicle. Installation will be mirror image for RHD vehicles.
ATTENTION
• Please disconnect the battery cable while conducting wiring operations. Failure to do so
may result in electrical shock or injury.
• . Also,
please make an note of data in the memory of the electrical components such as the
radio. This will help avoid problems that may arise when performing the repair check after
the installation.
• When tightening bolts or screws, use the proper tools and the proper size, and comply for
Failure to securely tighten the bolt and nut may cause them to loosen and fall off, causing
damage.
• When removing the connector from the vehicle, remember to remove the lock that holds
the main body of the connector, instead of pulling the lead line.
This protects against a lead wire cuts, etc.
• Please be sure to properly connect the connector and terminal. This helps to avoid a poor
connection.
• When wiring the harness(wiring), clamp the wires together along with the wiring harness
of the vehicle. This protects the harness from becoming entangled or causing strange
sounds.
• , etc, be
careful not to let the harness be hooked or pulled from the back. This protects against a
cut wire or shorts.
• Be careful not to forcefully pull the wiring harness of the vehicle. This helps prevent the
connector from being disconnected, and the wires from being cut or damaged.
• After installing the wiring, perform an operations check on the newly installed parts before
reassembling. This helps prevent mis-wiring.
Vehicle-side pre-wire(Power system)
Vehicle-side pre-wire(Video system)
Relay harness
CD PLAYER
CD PLAYER
Vehicle-side pre-wire(Power system)
Relay harness
Vehicle-side pre-wire(Video system)
INSTALLATION OVERVIEW
To prevent any accident during work, make sure to disconnect the negative (-) terminal of the battery
according to the latest service manual.
WARNING
WRX
WRX
6MT
CVT
-4-
Shift lever boot ASSY
Clips
Shift knob
6MT
REMOVING THE VEHICLE COMPONENTS
(1) Rotate the shift knob in the direction of the
arrow to remove it.
(2) Remove the shift lever boot ASSY.
(Clips: 8 points)
Affix curing tape to the shaded parts ( ) in the figure to protect the vehicle.
NOTE
-5-
WRX
Bolt Console box ASSY
Bolt
Cap console
Cap console
Moving forward
Cover front ASSY
Connector position
Clips
Parking brake boot
Clips
Tab
6MT
(3) Remove the parking brake boot.
(Clips: 5 points, Tab: 1 point)
(4) Remove the cover front ASSY.
(Clips: 12 points)
(5) Remove the two cap consoles.
(6) Remove the two bolts.
-6-
WRX
Clips
Screw
Cover center side RH
Screw
Console box ASSY
Connector position
Clips
6MT
(7) Remove the screw, disconnect each
connector, and remove the console box
ASSY.
(Clips: 3 points)
(8) Remove the screw, and then remove the
cover center side RH.
(Clips: 2 points)
-7-
WRX
Rubber of the center tray
Screwdriver
Shift lever
-8-
CVT
(1) Turn over the rubber of the center tray, insert
the screwdriver into the position in the figure,
and while inserting it to the depth, lower the
shift lever.
(2) Lower the shift lever boot, and pull out the
pin to remove the shift knob.
(3) Remove the center tray.
Affix curing tape to the shaded parts ( ) in the figure to protect the vehicle.
NOTE
Center tray
Pin
Shift knob
Shift lever boot
WRX
-9-
CVT
Plastic panel
Rubber of the
Center tray
Hooks of the rubber
Insert into this position. Hooks of the rubber
Shift down the hook
Caution during reinstallation
● If the plastic panel is detached from the rubber
during removal of the center tray, firmly fit the
hooks of the rubber into the recess sections of
the plastic panel, and perform reinstallation.
Clips
Cover front ASSY
Connector position
(4) Disconnect the one connector, and then
remove the cover front ASSY.
(Clips: 18 points)
WRX
Cover center side RH
Screw
Clips
-10-
CVT
Cap console
Tabs
Screws
Console box ASSY
Bolt
Cap console
Bolt
Connectors
(5) Remove the two points of the cap console.
(6) Remove the two bolts and two screws, and
while disconnecting the three connectors,
remove the console box ASSY.
(Tabs: 2 points)
(7) Remove the screw, and then remove the
cover center side RH.
(Clips: 2 points)
WRX
Clip
Nose pliers
Existing harness
Console box Rear
Console box Rear
Console box ASSY
Console box ASSY
Clips
Clips
Clips
Existing harness
A
A
Console box ASSY
-11-
EXCHANGING TO THE CONSOLE BOX ASSY POCKET (FOR DECK)
(1) Remove the existing harness.
(Clips: 7 points)
(2) Remove the console box rear and set it to
the floating state.
(Clips: 6 points)
(3) Release the clips (2 points) of the existing
harness, and then remove the console box
rear.
6MT
For section A in the figure, use
nose pliers to hold the clips and
remove them.
NOTE
Removal of the clip at section A
WRX
Screw
Screw
Console box RH
Clips
Console box LH Screw
Screw 1
2
Screws
Lid ASSY
Console box ASSY
(4) Remove the three screws, and then remove
the lid ASSY.
(5) Remove the two screws, and then remove
the console box RH in the order of 1 and 2.
(Clips: 4 points)
* Remove the console box LH in the same
way.
-12-
6MT
WRX
Existing pocket
Pocket(for deck)
Socket
Socket
Remove
(6) Remove the socket from the existing pocket,
and attach it to the pocket (for deck).
-13-
6MT
CD PLAYER
Bracket LH
Bracket RH
Truss screws (M5x6)
Truss screws (M5x6)
(7) Use the four truss screws (M5x6)
to attach the bracket RH and
bracket LH to the CD PLAYER.
WRX
Pocket(for deck)
CD PLAYER
Pocket(for deck)
CD PLAYER
-14-
6MT
(8) Install the CD PLAYER while passing the
CD PLAYER cable through the hole in the
pocket (for deck).
(9) Use the four screws (M5x16) to fix the
CD PLAYER to the pocket (for deck).
WRX
Screws( )
Panel deck
Pocket(for deck)
Front side
Pocket(for deck)
Fix the clip
(Gray 4P connector)
Fix the clip
(White 5P connector)
Fix the clip
Existing hole
Existing hole
Front side
Pocket(for deck)
Fix the clip
Existing hole
CD PLAYER cable
CD PLAYER (10) Fix the clip of the CD PLAYER cable into
the existing holes in the pocket (for deck).
(11) Fix the two CD PLAYER cable connectors
into the existing holes in the pocket
(for deck).
(12) Fix the clip of the CD PLAYER cable into
the existing holes in the pocket (for deck).
(13) Install the panel deck to the pocket
(for deck).
(14) Use the two screws (M5x16) to fix the deck.
-15-
6MT
WRX
Console box ASSY
Vinyl tape
Stay with clip
Vinyl tape Existing harness
CD PLAYER
Console box ASSY
-16-
6MT
(15) Assemble the console box ASSY using the
reverse procedure to removal.
(16) Turn over the console box ASSY, peel off
the vinyl tape from the existing harness, and
then remove the L-shaped stay with clip.
WRX
Existing harness
40mm
Cable tie
Pocket(for deck)
Urethane sheet
(attach one sheet)
Urethane sheet
(align the length and cut)
Fold back
Align
Align Existing harness
-17-
6MT
(17) Aligning with the end of the sponge of
existing harness, attach the two urethane
sheets and fold them back.
(18) Use a cable tie to fix the indicated position
of the existing harness to the pocket
(for deck).
WRX
-18-
Nose pliers
Clip
Existing harness
How to release the clip
Remove the clip at this position
from the exterior. Console box ASSY
Clips
Remove the clip at this position Existing harness
from the exterior.
(1) Remove the existing harness.
(Clips: 8 points)
Use nose pliers to pinch the six clips on
the existing harness and release them.
Release the two clips shown by the arrows
in the figure from the exterior of the
console box ASSY.
NOTE
CVT
Console box ASSY
Console box rear
Clips
(2) Remove the console box rear.
(Clips: 6 points)
WRX
Pocket(for deck)
Remove the socket Socket
Existing pocket
Console box ASSY
Lid ASSY
Screws
-19-
CVT
Console box LH
Console box RH
Clips
Screw
Screw
1
2
Screw
Screw
(3) Remove the four screws, and then remove
the lid ASSY.
(4) Remove the two screws, and then remove
the console box RH in the order of 1 and 2.
(Clips: 5 points)
* Remove the console box LH in the same
way.
(5) Remove the socket from the existing pocket,
and attach it to the pocket (for deck).
The existing pocket is not reused.
Hand it to the customer.
NOTE
WRX
Spring nuts
Spring nuts
Front side
Pocket (for deck)
-20-
CVT
CD PLAYER
Bracket LH
Bracket RH
Truss scews (M5x6)
Truss scews (M5x6)
(6) Attach the four spring nuts to the pocket
(for deck).
(7) Use the four truss screws (M5x6)
to attach the bracket RH and
bracket LH to the CD PLAYER.
CD PLAYER
Pocket (for deck)
Pass the cable
through the hole.
(8) Install the CD PLAYER while passing the
CD PLAYER cable through the hole in the
pocket (for deck).
WRX
-21-
Pocket(for deck)
Fix the clip CD PLAYER cable
Existing hole
Front side
Pocket(for deck)
Fix the connector with clips
Existing hole
Existing hole
CD PLAYER cable
Front side
CD PLAYER
Scews (M5x16) Scews (M5x16)
Pocket (for deck)
(9) Use the four screws (M5x16) to fix the
CD PLAYER to the pocket (for deck).
(10) Fix the two CD PLAYER cable connectors
into the existing holes in the pocket
(for deck).
(11) Fix the CD PLAYER cable into the existing
holes in the pocket (for deck) using a cable
tie.
(12) Fix the CD PLAYER cable into the existing
holes in the pocket (for deck) using a cable
tie.
CVT
WRX
Console box ASSY
CD PLAYER
Pocket (for deck)
Panel deck
Clips
Plastic clips
Plastic clips
Panel deck
(13) Install six plastic clips to the panel deck.
(14) Install the panel deck to the pocket
(for deck).
(15) Assemble the console box ASSY using the
reverse procedure to removal.
-22-
CVT
WRX
Connect the connector
with the black side
Relay harness(4pole)
Vehicle-side pre-wire
connector(4pole)
Relay harness
Cable tie
WIRING OF RELAY HARNESS
(1) Connect the connector with the black
connection side of the relay harness to the
vehicle-side pre-wire connector.
(2) Wire the relay harness along the
vehicle harness, and fix it with a
cable tie.
-23-
6MT
To prevent damage to the vehicle-side
connector, make sure not to connect the
gray-surface connector of the relay
harness.
NOTE
WRX
Connector of the CD PLAYER
(White 5P connector)
Console box ASSY
Connector of the
existing harness
(White 5P connector)
Connector of the existing harness
(White 5P connector)
Peel off the vinyl tape
-24-
(3) Peel off the vinyl tape and take out the white
5P connector of the existing harness.
6MT
(4) Connect the white 5P connector of the
existing harness to the white 5P connector
of the CD PLAYER installed in the console
box ASSY.
(5) Reinstall the console box ASSY in the vehicle
using the reverse procedure to removal.
WRX
Connector of the
existing harness
(White 5P connector)
Cable tie
Relay harness Existing harness
-25-
6MT
Relay harness
Gray 4P connector of the CD PLAYER
(6) Connect the relay harness to the gray 4P
connector of the CD PLAYER.
(7) Fix the harnesses with cable ties as shown in
the figure.
To prevent damage to the vehicle-side
connector, make sure not to connect the
black-surface connector of the relay
harness.
NOTE
Connect the connector
with the gray side
WRX
-26-
6MT
CD PLAYER
Mat
(8) After reinstalling the vehicle components,
attach the mat in the console box ASSY.
WRX
-27-
CVT
(1) Connect the connector with the black
connection side of the relay harness to the
vehicle-side pre-wire connector.
To prevent damage to the vehicle-side
connector, make sure not to connect the
gray-surface connector of the relay
harness.
NOTE
Vehicle-side pre-wire
connector(4pole)
Connect the connector
with the black side
Relay harness(4pole)
Cable tie
Relay harness
Cable tie
Fix to the vehicle-side pre-wire
(2) Wire the relay harness along the
vehicle harness, and fix it with a
cable tie.
(3) Reinstall the console box ASSY in
the vehicle using the reverse
procedure to removal.
WRX
CD PLAYER
Mat
Vehicle-side pre-wire
(White 5P)
Relay harness
CD PLAYER cable
connector (Gray 4P)
CD PLAYER cable
connector (White 5P)
(4) Connect the connectors of the relay harness
and vehicle-side pre-wire to the CD PLAYER
cable connectors.
(5) After reinstalling the vehicle components,
attach the mat in the console box ASSY.
-28-
CVT
Connect the connector
with the gray side
To prevent damage to the vehicle-side
connector, make sure not to connect the
black-surface connector of the relay
harness.
NOTE
WRX
CD PLAYER
Connector (White 5P)
Connector (Gray 4P)
Relay harness
Vehicle-side pre-wire (power system)
Vehicle-side pre-wire (video system)
WIRING DIAGRAM
Operation Check
(1) Referring to the wiring diagram, connect all wires.
(2) Connect the battery, and turn on the engine switch.
(3) Insert a CD medium into the deck, and check for EJECT/Loading/Playback output.
-29-
Vihicle-side
Must be gray
connection surface
Must be black
connection surface
WRX
REVISION HISTORY
Content Date
Newly established 10 / 2021
△ 1 Part number change 8 / 2023
△
△ 0
△
△
-30-
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.