Accessory Installation Guide
| 2025MY Forester – Auto-Dimming Mirror with Compass and HomeLink | H501SAN000 |
Installation instructions
Instructions d’installatiion
Part number:
Numéro de piéce:
H501SAN000
Vehicle:
Véhicule:
Forester
Description: Auto dimming mirror
Description: Tetroviseur antieblouissement
1
Disconnect battery cable from the negative battery stud.
Débranchez le câble de la batterie de la borne négative de la batterie.
2
Remove cover with panel removal tool
Retirez le couvercle à l’aide de l’outil de dépose de panneau
3
Remove 2 screws/ 8mm bolts (as equipped)
Enlevez 2 vis/ les boulons de 8 mm (selon l’équipement)
4
Pull assembly down to disengage
Tirez l’ensemble vers le bas pour le désengager
5
Push Eyesight cover forward to release the clips
Poussez le couvercle EyeSight vers l’avant pour libérer les attaches
6
Firmly grasp the factory mirror and remove by rotating the base and pulling away simultaneously from the windshield mounting button.
Saisissez fermement le rétroviseur d’origine et retirez-le en tournant la base et en l’écartant simultanément du bouton de fixation du pare-brise.
CAUTION: Avoid strong force applied to the EyeSight unit, the orientation of the camera could change and the EyeSight camera would need to be calibrated.
7
Push lower eyesight cover forward to disengage clips and remove
Poussez le couvercle EyeSight inférieur vers l’avant pour désengager les attaches et le retirer
8
1. Install the Compass mirror with HomeLink by aligning the mirror retention clips with the windshield mirror button and pressing against the mirror to fully seat the mirror.
2. Rotate the mirror until properly aligned with the reference notch shown
1. Installez le rétroviseur à boussole équipé d’HomeLink en alignant les attaches de fixation du rétroviseur avec le bouton de pare-brise du rétroviseur, puis en pressant suffisamment sur le rétroviseur pour bien le positionner.
2.Tournez le rétroviseur jusqu’à ce qu’il soit bien aligné avec la référence
9
Route mirror connector over eyesight module and slide onto connector tab
Acheminez le connecteur du rétroviseur par-dessus le module EyeSight et glissez-le vers languette du connecteur
10
1. Plug jumper harness into pre-wire connector and mirror
2. Collect and tape excess harness to sheet metal using foam tape and zip tie
1. Branchez le faisceau cavalier dans le connecteur de précâblé et dans le rétroviseur et
2. Ramassez l’excédent de faisceau puis collez-le sur la tôle à l’aide de ruban mousse et attachez-le
11
Re-install lower eyesight cover by setting up and pulling rearward
Réinstallez le couvercle inférieur EyeSight en le soulevant et en le tirant vers l’arrière
12
Reinstall upper Eyesight cover
Réinstallez le couvercle EyeSight supérieur.
13
Plug in connectors
Branchez les connecteurs
14
Re-install 2 screws/ 8mm bolts (as equipped)
Réinstallez 2 vis/ les boulons de 8 mm (selon l’équipement)
15
View of reinstalled components
Vue des composants réinstallés
16
Reconnect battery. If equipped reconnect eyelet cable. Tighten bolt to 66 in-lbs.
Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’oeillet. Serrez les boulons à 66 po-lb.
17
Using dark cloth or cardboard, completely cover forward-looking sensor.
Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant.
18
To calibrate compass reference mirror user guide.
Pour étalonne la boussole, reportez-vous au manuel du rétroviseur.
H501SAN000
- 1.【4.3-inch screen】: Our car rearview mirror display is a 4.3-inch color screen with a resolution of 480*272 and a 16:9 display format; the brightness of 500 cd/m2 ensures clear visibility even in bright sunlight.
- 2.【Auto-dimming function】: The HD is equipped with an automatic dimming function, which can adjust the brightness according to the ambient light conditions and automatically turn on the rearview camera screen when reversing. With an accurate distance scale line display, it can park and reverse correctly, making parking and reversing more convenient and .
- 3.【ABS shell】Our interior rear view mirror made of high-quality and materials. ABS shell, not only ensures its service life, but also adds a stylish and modern feel to your car interior.
- 4.【Practicality】Our 4.3-inch rearview mirror automatic dimming display is designed to provide high-definition and automatic dimming reversing images, solving the problem of poor rearview effect of the car and ensuring a safer parking and reversing experience.
- 5. 【Package List】The package contains 1 car rearview mirror monitor, 1 video cable and power cable, 1 extra cable cover, 1 English manual, 1 bracket and 5 screws, providing everything you need for easy and worry- installation.
- UPGRADED 4K UHD CLARITY - Experience stunning detail with the front camera's upgrade to 4K UHD (2160p) resolution, paired with a 1080p rear camera. The extra-large 12" display provides 1.5 times the viewing area of a standard mirror, significantly reducing blind spots for enhanced safety.
- 5.8GHz WiFi&GPS TRACKING - The included external GPS antenna enables real-time GPS data display directly on the dash cam. Connect to your phone via Wi-Fi and use the "WOLFBOX" app on iOS or Android devices to real-time viewing, playback recordings, and quick sharing of videos.
- LARGER SCREEN & WIDER VIEW - The WOLFBOX G840S mirror camera features a 170° front lens and a 140° rear lens, offering a broader field of view to minimize blind spots during driving and reversing. The smart split-screen function allows simultaneous monitoring of both lenses, while the 2.5D curved screen seamlessly integrates with your vehicle’s interior.
- SUPERIOR NIGHT VISION & IMAGE QUALITY - The G840S mirror dash camera is equipped with an upgraded low-reflectivity LCD to reduce daytime reflections. With incorporated WDR & HDR technology for balanced lighting, and a professional-grade sensor paired with a 6-glass lens for superior image quality, nighttime driving or challenging lighting conditions are handled with ease.
- 24-HOUR PARKING MONITOR - Beyond on-the-road safety with loop recording, the WOLFBOX camera also features a 24-hour parking monitor. Time-lapse mode records at a low frame rate to conserve power and storage while ensuring continuous surveillance of your vehicle. (A hardwire kit is required for parking monitoring.)
- AUTO_DIMMING: Automatically darkens to eliminate glare
- FRAMELESS DESIGN: Enhanced aesthetics to complement any vehicle interior
- CAR_TO_HOME AUTOMATION: Control garage doors, gates, home lighting, and more
- INTEGRATED HOMELINK 5: 99% compatibility with garage door openers and security gates
- COMPATIBILITY: Compatible with any wedge mount vehicle along with others using adapters (GENMM1, GENMM2, GENMM3)
- Auto-Dimming
- Homelink integration
- Enhanced Wide-Angle View: Experience a panoramic view with the Verivue Mirrors 12-inch clip-on rearview mirror, perfect for eliminating blind spots and ensuring safet drive
- Anti-Glare Technology: Designed with a clear tint, this rearview mirror minimizes glare during both day and night driving, making your journey comfortable.
- Universal Compatibility: This rear view mirror fits most cars, SUVs, and trucks, making it a versatile accessory for improved visibility.
- Perfect for Baby Monitoring: Ideal for parents with rear-facing car seats, this mirror provides a clear view of your baby, enhancing safety and peace of mind.
- Premium Quality and Easy Installation: Made from durable materials, this mirror securely clips onto your existing rearview mirror in seconds without tools.
Last update on 2026-06-14 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Installation instructions Instructions d’installatiion
Auto dimming mirror Tetroviseur antieblouissement
Tools required Outils requis
Part number: Numéro de piéce:
Kit contents Contenu de la trousse
H501SAN000
Description: Auto dimming mirror Description: Tetroviseur antieblouissement
ISSUE A
DATE 9/22/2023
SUBARU
OF AMERICA
PAGE
1/6
A
Panel removal tool
Outil de dépose du panneau
Vehicle:
Forester
Véhicule
10 mm
PART NUMBER H501SAN000
B C D
Wire harness Faisceau de câblage
Wire Tie Attache autoblo- quante
Foam Tape
Ruban mou se 1 2 10 mm Disconnect battery cable from the negative battery stud. Débranchez le câble de la batterie de la borne négative de la batterie. Remove cover with panel removal tool
Retirez le couvercle à l’aide de l’outil de dépose de panneau 3 4 Remove 2 screws/ 8mm bolts (as equipped)
Enlevez 2 vis/ les boulons de 8 mm (selon l’équipement) Pull assembly down to disengage
Tirez l’ensemble vers le bas pour le désengager PART NUMBER H501SAN000 ISSUE A DATE 9/22/2023 SUBARU OF AMERICA PAGE
2/6 5 6 Push Eyesight cover forward to release the clips
Poussez le couvercle EyeSight vers l’avant pour libérer les attaches Firmly grasp the factory mirror and remove by rotating the base and pulling away simultaneously from the windshield mounting button.
Saisissez fermement le rétroviseur d’origine et retirez-le en tournant la base et en l’écartant simultanément du bouton de fixation du pare-brise.
CAUTION: Avoid strong force applied to the EyeSight unit, the orientation of the camera could change and the EyeSight camera would need to be calibrated. 7 8 1 2 Push lower eyesight cover forward to disengage clips and remove
Poussez le couvercle EyeSight inférieur vers l’avant pour désengager les attaches et le retirer 1. Install the Compass mirror with HomeLink by aligning the mirror retention clips with the windshield mirror button and pressing against the mirror to fully seat the mirror.
2. Rotate the mirror until properly aligned with the reference notch shown
1. Installez le rétroviseur à boussole équipé d’HomeLink en alignant les attaches de fixation du rétroviseur avec le bouton de pare-brise du rétroviseur, puis en pressant suffisamment sur le rétroviseur pour bien le positionner.
2.Tournez le rétroviseur jusqu’à ce qu’il soit bien aligné avec la référence PART NUMBER H501SAN000 ISSUE A DATE 9/22/2023 SUBARU OF AMERICA PAGE
3/6 9 10 1 2 Route mirror connector over eyesight module and slide onto connector tab
Acheminez le connecteur du rétroviseur par-dessus le module EyeSight et glissez-le vers languette du connecteur 1. Plug jumper harness into pre-wire connector and mirror
2. Collect and tape excess harness to sheet metal using foam
tape and zip tie
1. Branchez le faisceau cavalier dans le connecteur de précâblé et dans le rétroviseur et
2. Ramassez l’excédent de faisceau puis collez-le sur la tôle à
l’aide de ruban mousse et attachez-le 11 12 Re-install lower eyesight cover by setting up and pulling rearward Réinstallez le couvercle inférieur EyeSight en le soulevant et en le tirant vers l’arrière Reinstall upper Eyesight cover
Réinstallez le couvercle EyeSight supérieur. PART NUMBER H501SAN000 ISSUE A DATE 9/22/2023 SUBARU OF AMERICA PAGE
4/6 13 14 Plug in connectors Branchez les connecteurs Re-install 2 screws/ 8mm bolts (as equipped) Réinstallez 2 vis/ les boulons de 8 mm (selon l’équipement) 15 16 10 mm View of reinstalled components Vue des composants réinstallés Reconnect battery. If equipped reconnect eyelet cable. Tighten bolt to 66 in-lbs.
Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’œillet. Serrez les boulons à 66 po-lb. PART NUMBER H501SAN000 ISSUE A DATE 9/22/2023 SUBARU OF AMERICA PAGE
5/6 E
PART NUMBER H501SAN000
DATE
A 9/22/2023
SUBARU OF AMERICA
PAGE
6/6 17 18
Using dark cloth or cardboard, completely cover forward-looking sensor.
Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant.
To calibrate compass reference mirror user guide.
Pour étalonne la boussole, reportez-vous au manuel du rétro-
viseur.
SEOCONTENT-END
This product presentation was made with AAWP plugin.