Accessory Installation Guide
2018-2023MY Crosstrek (excluding Hybrid) – STI Leather Shift Knob | C1010FL001 |
INSTALLATION INSTRUCTIONS
PART NUMBER: C1010FL001
DESCRIPTION: STI CVT SHIFT KNOB
STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park.
STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip.
STEP 3: Use fingers to push pin clip forward on both sides. Remove OE shift knob.
STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard.
STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button.
STEP 1: Park vehicle on level surface. Apply parking brake. Turn ignition off. Use plastic trim removal tool and pry cover grip downward.
STEP 2: Use fingers to push pin clip forward on both sides. Remove OE shift knob.
STEP 3: Check to make sure pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
STEP 4: While holding down shift knob, pull the cover grip upward until a click is heard. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button.
C1010FL001
- Genuine Subaru Leather Shift Knob
- 35160AL00A
- CVT Automatic Models Only
- Add a stylish touch with the leather-trimmed shift knob.
- 2019-2024 ASCENT
- Premium 100% Real Carbon Fiber JDM Style Shift Knob Upgrade: Transform your driving experience with a bold, performance-ready look using glossy real carbon fiber and a durable clear-coated finish.
- One Size Fits Most 4/5/6 Speed Manual & Buttonless Automatic Shifters: Works with most cars, trucks, and SUVs using standard threaded shift levers. Designed as a low-profile, universal-style replacement for worn-out factory gear stick shift knobs or simple interior customization.
- 2.9” Height With 1.3” Top Diameter & Real Grade A 3K Twill Carbon Fiber Construction: Features a sleek 2.9-inch design with a 1.3-inch top diameter, paired with 100% genuine Grade A 3K twill carbon fiber for premium strength and a comfortable weighted feel that enhances shifting control.
- Clear-Coated Carbon Fiber for UV & Fade Resistance: The carbon fiber surface is finished with a protective clear coating that resists color fading, enhances UV protection, and maintains a glossy, long-lasting look.
- Improved Grip & Shifting Feel: The tapered performance design provides a comfortable hand feel that gives you better control, reduces missed shifts, and improves your overall driving experience.
- PERFECT UPGRADE – High-quality replacement gear shift knob designed to refresh your car interior. A stylish aftermarket option to replace your worn-out OEM factory knob. Fits most automatic and manual transmission vehicles including fits Toyota, Lexus, Acura, Mazda, Subaru, Scion, Nissan, Infiniti
- PREMIUM QUALITY – Crafted with durable, wear-resistant leather and a smooth surface finish. Ergonomically shaped for a comfortable grip and long-lasting durability.
- EASY INSTALLATION – Quick screw-on installation with no tools or modifications required. Simply twist clockwise to install. Compatible with most automatic and manual transmission gearbox shifters without a Button, with M8, M10, M12 thread size.
- UNIVERSAL COMPATIBILITY – Compatible with Mazda 3, 5, 6, 8, CX-5, CX-7, CX-9, and MX-5; Acura MDX, RL, TL, TSX, and CL; Scion tC, xB, xD, and iQ; Toyota 4Runner, Avalon, Camry, Corolla, Matrix, Rav4, Sienna, Tacoma, Tundra, Highlander, and Venza; Lexus ES, GS, IS, LS, LX, RX, and SC; Subaru Forester Impreza Legacy Outback, Nissan Titan Armada, Infiniti QX56 models with M8, M10, M12 threads.
- DIRECT FITMENT – Knob size: 4.3” x 2” x 1.6” [11cm x 5cm x 4.5cm]. Direct replacement upgrade option for your OEM Knob Sub-Assembly Shift Lever. Directly fits wide-ranging vehicles with 8mm x1.25, 10mm x 1.25, 10mm x 1.5, M12mm x 1.25 thread sizes.
- COMPATIBLE MODELS: Compatible with 1998-2000 Honda Accord Coupe Coupe 2-Door, 1998-2002 Honda Accord DX Sedan 4-Door, 1998-2002 Honda Accord EX Coupe 2-Door, 1998-2002 Honda Accord EX Sedan 4-Door, 1998-2002 Honda Accord EX-R Sedan 4-Door, 1998-2002 Honda Accord LX Coupe 2-Door, 1998-2002 Honda Accord LX Sedan 4-Door, 2002 Honda Accord SE Coupe 2-Door, 2000 2002 Honda Accord SE Sedan 4-Door, 2001 2002 Honda Accord Value Package Sedan 4-Door
- PACKAGING INCLUDES: 1 set shift knob assembly
- PART NUMBER: 54130-S84-A81ZA
- RELIABLE QUALITY: This shift knob assembly is made of high-quality materials with stable performance, ensuring your gear shifting is flexible and stable
- EASY INSTALLATION: This shift knob assembly is easy to install and allows you to easily repair your gear shifter, providing you with a good driving experience
- Premium Racing Red JDM Style 100% Real Carbon Fiber Shift Knob Upgrade: Add an instant performance-inspired look to your interior with this cool JDM-style shift knob featuring shiny metallic red accents and a real carbon fiber center section.
- One Size Fits Most 4/5/6 Speed Manual & Buttonless Automatic Shifters: Works with most cars, trucks, and SUVs using standard threaded shift levers. Designed as a low-profile, universal-style replacement for worn-out factory gear stick shift knobs or simple interior customization.
- 3.5” Height With 1.25” Top Diameter & Real Grade A 3K Twill Carbon Fiber Construction: Features a sleek 3.5-inch design with a 1.25-inch top diameter, paired with 100% genuine Grade A 3K twill carbon fiber in the center for premium strength and a comfortable weighted feel that enhances shifting control.
- Clear-Coated Carbon Fiber for UV & Fade Resistance: The carbon fiber middle section is finished with a protective clear coating that resists color fading, enhances UV protection, and maintains a glossy, long-lasting look.
- Improved Grip & Shifting Feel: The tapered performance design provides a comfortable hand feel that gives you better control, reduces missed shifts, and improves your overall driving experience.
Last update on 2026-06-26 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
PART NUMBER: C1010FL001
TOOLS REQUIRED:
INSTALLATION INSTRUCTIONS DESCRIPTION: STI CVT SHIFT KNOB
PARTS IDENTIFICATION:
PART NUMBER:
C1010FL001
ISSUE
00
12/4/2023 SUBARU OF AMERICA PAGE 1 / 6
STI CVT SHIFT KNOB
Plastic Trim Removal Tool
SHIFT
KNOB
PRE-INSTALLED
PIN CLIP
STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip.
PART NUMBER: C1010FL001
FOR VEHICLES WITH A SHIFT BOOT (Page 2 – Page 4)
STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park.
PART NUMBER:
C1010FL001
ISSUE
00
12/4/2023 SUBARU OF AMERICA PAGE 2 / 6
STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift
knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If
the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
PART NUMBER: C1010FL001
FOR VEHICLES WITH A SHIFT BOOT (Page 2 – Page 4)
STEP 3: Use fingers to push pin clip forward on both sides. Remove OE shift knob.
PART NUMBER:
C1010FL001
ISSUE
00
12/4/2023 SUBARU OF AMERICA PAGE 3 / 6
STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed
before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button.
PART NUMBER:
C1010FL001
ISSUE
00
12/4/2023 SUBARU OF AMERICA PAGE 4 / 6
PART NUMBER: C1010FL001
FOR VEHICLES WITH A SHIFT BOOT (Page 2 – Page 4)
STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard.
STEP 2: Use fingers to push pin clip forward on both sides. Remove OE shift knob.
PART NUMBER: C1010FL001
FOR VEHICLES WITHOUT A SHIFT BOOT (Page 5 – Page 6)
STEP 1: Park vehicle on level surface. Apply parking brake. Turn ignition off. Use plastic trim removal tool and pry cover grip downward.
PART NUMBER:
C1010FL001
ISSUE
00
12/4/2023 SUBARU OF AMERICA PAGE 5 / 6
STEP 4: While holding down shift knob, pull the cover grip upward until a click is heard. Confirm that the shift knob is firmly installed and that the button can be fully
depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out
of “P” without depressing button.
PART NUMBER:
C1010FL001
ISSUE
00
12/4/2023 SUBARU OF AMERICA PAGE 6 / 6
PART NUMBER: C1010FL001
FOR VEHICLES WITHOUT A SHIFT BOOT (Page 5 – Page 6)
STEP 3: Check to make sure pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then
push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes
loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.