October 17, 2019 NHTSA CAMPAIGN NUMBER: 19V744000
An unexpected loss of power while driving can increase the risk of a crash.
NHTSA Campaign Number: 19V744
Manufacturer Subaru
of America, Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 205,000
Summary
Subaru of America, Inc. (Subaru) is recalling certain 2017-2018 Impreza and 2018 Crosstrek vehicles equipped with an aluminum Positive Crankcase Ventilation (PCV) valve. The PCV valve may come apart, allowing the separated components to enter the engine, possibly resulting in a loss of power while driving.
Remedy
Subaru will notify owners, and dealers will inspect and, if necessary, replace the PCV valve, free of charge. If the PCV valve has separated and the components cannot be found, the engine will be replaced, free of charge. The recall began December 2, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru’s number for this recall is WUP-01.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Subaru has a Recall
NUMBER: WUP-01R
NHTSA ID: 19V-744
DATE: 10/24/19
REVISED: 12/05/19
| APPLICABILITY: | 2017-18MY Impreza 2018MY Crosstrek |
|---|---|
| SUBJECT: | PCV Valve- Design Change |
INTRODUCTION:
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective.
AFFECTED VEHICLES:
| Model Year(s) | Carline | Production Date Range |
| 2017-2019 | Impreza | July 28, 2016 – March 8, 2018 |
| 2018 | Crosstrek | May 9, 2017 – April 2, 2018 |
Not all vehicles in the production range listed above are affected by this recall. Coverage must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com prior to repair.
The status of this recall will display as “Open – Remedy Not Yet Available” until sufficient parts supply is available.
REASON FOR THIS RECALL:
The PCV valve may separate and allow engine oil to enter the combustion chamber, resulting in a visible change in appearance and/or the amount of tailpipe exhaust. If driving under this condition continues, separated components from the PCV valve may enter the engine.
SAFETY RISK:
If separated components from the PCV valve enter the engine, the vehicle may experience a loss of motive power, increasing the risk of a crash.
DESCRIPTION OF THE REMEDY:
Vehicles affected by this recall will require an inspection and potential replacement of the PCV valve and hose.
OWNER NOTIFICATION:
Subaru will notify affected vehicle owners by first class mail within 60 days. Owners with a valid email address on file will also be notified by email. Retailers will be advised when the notification is scheduled.
RETAILER RESPONSIBILITY:
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $21,000 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement.
Any vehicles listed in any recall/campaign that are in retailer stock must be:
- Immediately identified.
- Tagged or otherwise marked to prevent their delivery or use prior to repair.
- Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin
Retailers are to promptly follow the applicable service procedures, to correct all affected vehicles in their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken into retailer inventory necessary steps should be taken to ensure the recall correction has been made before selling or releasing the vehicle.
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
A new parts kit, p.n. X1181AA000 consisting of a new steel PCV valve and hose is now available. The NEW-style PCV Valve is made of steel and has a BLUE ring above the hex portion as shown. The old -style is made of aluminum and has a PINK ring above the hex portion.
NOTE: P.n. SOA635322 (ThreeBond 1217H) is to be used for the PCV valve thread sealer.
SERVICE PROCEDURE / INFORMATION:
Due to a production error, the Positive Crankcase Ventilation (PCV) valve may fail causing its internal components to fall into the crankcase. As a result, the engine may smoke excessively from the exhaust. The repair involves removal of the PCV valve, inspection for failure and replacement. If the valve has failed (come apart), further action is necessary to locate and remove the failed PCV valve components.
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for PCV valve and hose replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
IMPORTANT: The two flow charts below provide an overview for the service procedures. The first is for Crosstrek and the second for Impreza. Detailed service procedures to be followed are also provided and must reviewed completely before proceeding.
FLOW CHART FOR CROSSTREK:
FLOW CHART FOR IMPREZA:
STEP 1: Locate the PCV valve and check the identification color. If for some reason the color cannot be identified, remove the PCV valve and confirm the condition (failed / come apart). If the (unidentifiable) PCV valve is not broken, replace it with a new (BLUE) valve and PCV hose. If the valve is broken, proceed as if it were a PINK valve using the flow chart(s) above as a guide.
- If the valve has a PINK identification ring, proceed to STEP 2.
- If the valve has a BLUE identification ring, STOP. The procedure is complete. Proceed to the Claim Reimbursement and Entry Procedures section of this bulletin.
Step 2: Remove the PINK PCV valve and inspect it for breakage. Use the photos below for reference.
- If the PCV valve is BROKEN (NG), proceed to Step 3 and remove the engine following the procedure in the applicable Service Manual.
- If the PCV valve is OK (NOT broken), replace it with the new BLUE valve and hose from the kit to complete the procedure following the applicable Service Manual.
Step 3: (If necessary), following the applicable Service Manual procedures, remove the engine to collect the PCV valve component parts that may have fallen into the engine. Remove the oil separator cover and collect the PCV valve components (4 small parts) as shown in the photos below. If all the PCV valve components cannot be collected after removing the oil separator cover, proceed with removing the engine oil pan to collect any remaining components.
TIP: If any PCV valve components remain in the oil pan-side passage, CAREFULLY apply compressed air to the oil pan-side passage as shown below.
IMPORTANT REMINDERS:
- Always wear safety glasses.
- Never reuse the oil separator cover as it is a one-time use item. Replace it with n. 11831AA260.
Step 4:
- If all the broken PCV valve components cannot be found and collected, replace the short block assembly along with a new PCV valve and hose (kit) following the applicable Service Manual procedures.
- If all the broken PCV valve components are found and collected, install a new separator cover, PCV valve and hose (kit) then reassemble the vehicle following the applicable Service Manual procedures to complete the procedure.
CALIFORNIA “VEHICLE EMISSION RECALL – PROOF OF CORRECTION” CERTIFICATE
The California Air Resources Board and the Department of Motor Vehicles Registration/Recall Program requires that all emission related Recall/Campaign or Service Program repairs be completed before a vehicle registration is renewed. Please provide owners of vehicles registered in the state of California a completed “Vehicle Emission Recall – Proof of Correction” certificate. Vehicle owners should be advised to retain this certificate because the California Department of Motor Vehicles may require they provide proof this service program repair has been completed.
Additional certificates are available through normal parts ordering channels using part number MSA6P1301. Quantity 1 = 1 booklet of 50 certificates.
SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identification Label.
The completed label should be attached to the vehicle’s upper radiator support. Additional labels are available through normal parts ordering channels. The part number is MSA6P1302, which comes as one sheet of 20 labels.
| Part Number | Applicability | Description | Order Quantity |
| MSA6P1302 | All Models | Campaign Completion Labels (contains one sheet of 20 labels) | 1 |
CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers may submit claims through Subarunet.com.
| Labor Description | Labor Operation # | Labor Time | Fail Code | Claim Type |
| PCV VALVE INSPECTION ONLY | A145-630 | 0.2 | WUP-01 | RC |
| PCV VALVE INSPECTION, PCV VALVE AND HOSE REPLACEMENT | A145-631 | 0.3 | ||
| PCV VALVE INSPECTION, ENGINE R&R, SEPARATOR COVER REMOVAL TO COLLECT PCV PARTS, REPLACE PCV VALVE & HOSE | A145-632 | 5.7 | ||
| PCV VALVE INSPECTION, ENGINE R&R, SEPARATOR COVER & OIL PAN REMOVAL TO COLLECT PCV PARTS, REPLACE PCV VALVE & HOSE | A145-633 | 6.1 | ||
| PCV VALVE INSPECTION, ENGINE R&R, SEPARATOR COVER & OIL PAN REMOVAL, COLLECT PCV PARTS, REPLACE SHORT BLOCK, PCV VALVE & HOSE | A145-634 | 13.5 |
NOTE:
When claiming for the ThreeBond 1217H sealer:
- When the repair is replacing the PCV ONLY, use p.n. SOA635322 for sealing the PCV valve
- When the repair required involves resealing the separator cover and oil pan, use p.n. SOA635068.
- When the repair required involves Shortblock assembly replacement, use p.n. SOA635305.
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
OWNER NOTIFICATION LETTER
Notice to Lessors: Under Federal law the lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s) within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the applicable vehicle identification number (VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A leased vehicle is a vehicle leased to another person for a term of at least four months.)
A subsidiary of SUBARU CORPORATION
Subarunet Announcement
New Safety Recalls: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
Subaru of America, Inc. (Subaru) is initiating two new safety recalls for certain 2017-2019 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective.
- Vehicles affected by the WUP-01 recall will require an inspection and potential replacement of the PCV valve and hose.
- Vehicles affected by the WUS-04 recall will require a short block engine replacement, in addition to replacement of the PCV valve and hose.
Description of the Defect and Safety Risk
The PCV valve may separate and allow engine oil to enter the combustion chamber, resulting in a visible change in appearance and/or the amount of tailpipe exhaust. If driving under this condition continues, separated components from the PCV valve may enter the engine. If this occurs, the vehicle may experience a loss of motive power, increasing the risk of a crash.
Affected Vehicles
A total of 205,251 U.S. vehicles will be affected by these recalls, as listed below:
| Recall code | Model Year(s) | Carline | Production Date Range | Affected vehicle count |
| WUP-01 | 2017-2019 | Impreza | July 28, 2016 – March 8, 2018 | 121,501 |
| WUP-01 | 2018 | Crosstrek | May 9, 2017 – April 2, 2018 | 83,499 |
| WUS-04 | 2017 | Impreza | May 11, 2016 – November 11, 2016 | 251 |
Not all vehicles in the production ranges listed above are affected by these recall. Coverage must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com prior to repair. This coverage information is now available.
The status of these recalls will display as “Open – Remedy Not Yet Available” until sufficient parts supply is available.
Service, Parts, and Claim Instructions
Sufficient parts supply is expected to be available within the next month. Retailers will be notified when parts are available.
For detailed service, parts, and claim information, please refer to the WUP-01 and WUS-04 Product Campaign Bulletins on STIS, which will be posted next week. PCV Valve kits must be ordered through PRIME. Please refer to ‘Recalls & Campaigns/PRIME Max Quantities’ on subarunet for the orderable quantities.
Retailer Responsibility
Any vehicles listed in any recall/campaign that are in retailer stock must be:
- Immediately identified
- Tagged or otherwise marked to prevent their delivery or use prior to repair
- Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin
Retailers are to promptly perform the applicable service procedures, once they are available, to correct all affected vehicles in their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken into retailer inventory necessary steps should be taken to ensure the recall correction has been made before selling or releasing the vehicle.
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $21,000 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement.
Owner Notification
Subaru will notify affected vehicle owners by first class mail within 60 days. Owners with a valid email address on file will also be notified by email. Retailers will be advised when the notification is scheduled.
3 Affected Products
Vehicles
15 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V744-1939.PDF 211.243KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V744-7255.PDF 211.138KB
ISSUED Owner Notification Letter(Part 577)
Remedy Instructions and TSB
RCRIT-19V744-4417.pdf 1693.726KB
Remedy Instructions and TSB
RCRIT-19V744-1780.pdf 1694.91KB
Chronology
RMISC-19V744-0683.pdf 99.706KB
Manufacturer Notices(to Dealers,etc)- Owner Notification Schedule: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
RCMN-19V744-4167.pdf 155.036KB
Recall Acknowledgement
RCAK-19V744-9610.pdf 244.642KB
Remedy Instructions and TSB
RCRIT-19V744-4763.pdf 1770.471KB
Recall 573 Report – Amendment 1
RCLRPT-19V744-4403.PDF 215.825KB
Manufacturer Notices(to Dealers,etc)- Part Ordering Information
Manufacturer Notices(to Dealers,etc) – New Safety Recalls: WUP-01 and WUS-04 – Impreza and Crosstrek PCV Valve Recalls
RCMN-19V744-1900.pdf 206.729KB
Defect Notice 573 Report
RCLRPT-19V744-3102.PDF 215.484KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V744-3904.PDF 211.336KB
Recall Quarterly Report #4, 2020-3
RCLQRT-19V744-6910.PDF 211.446KB
Latest Recalls Documents
NUMBER: WUP-01R
NHTSA ID: 19V-744
DATE: 10/24/19
REVISED: 12/05/19
NUMBER: WUP-01R
NHTSA ID: 19V-744
DATE: 10/24/19
REVISED: 11/11/19
NUMBER: WUP-01R
NHTSA ID: 19V-744
DATE: 10/24/19
REVISED: 10/31/19
NUMBER: WUP-01
DATE: 10/24/19
NHTSA ID: 19V-744
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- UNDERSTAND YOUR CHECK ENGINE LIGHT – The ANCEL AD410 OBD2 scanner helps everyday drivers quickly read and clear engine-related fault codes, view code definitions, and understand why the check engine light is on before visiting a repair shop. With 42,000+ built-in DTC lookups, this car code reader helps reduce guesswork and makes basic vehicle diagnostics easier for beginners and DIY users
- FULL OBD2 DIAGNOSTICS MADE SIMPLE – More than a basic engine code reader, this OBD2 scanner diagnostic tool supports key OBDII functions including reading/clearing codes, live data, freeze frame, I/M readiness, O2 sensor test, EVAP test, vehicle information, and MIL status. It helps you check your car’s condition, verify repairs after the issue is fixed, and communicate with mechanics more confidently
- LIVE DATA & REAL-TIME VEHICLE INSIGHTS – View real-time engine data such as RPM, coolant temperature, fuel trim, oxygen sensor readings, and other available OBD2 parameters directly on the screen. These live data readings help you better understand how your vehicle is running, spot abnormal patterns, and make more informed repair decisions instead of relying only on a warning light
- SMOG CHECK READINESS AT A GLANCE – Use the I/M readiness function before a smog check or emissions inspection to see whether your vehicle’s monitors are ready. This OBD2 code scanner helps you confirm if recent repairs have brought the system back to a ready state, reducing the chance of failed inspections, retests, wasted trips, and unnecessary inspection fees
- WORKS WITH MOST OBD2 VEHICLES – Compatible with most 1996 and newer U.S.-based OBD2 cars, SUVs, and light trucks, as well as many 2000 and newer EU/Asian OBD2 vehicles. Supports major OBDII protocols including CAN, ISO9141, KWP2000, J1850 VPW, and J1850 PWM. This automotive diagnostic scanner is designed for wide vehicle coverage; please check compatibility with your vehicle before purchase
- 【Diagnose Check Engine Light in Seconds – No Mechanic Needed】The FOXWELL NT301 OBD2 scanner instantly reads & clears engine fault codes (DTCs) with one click. Simply plug into the 16-pin DLC port, turn ignition on, and get accurate results within seconds—No prior car knowledge required. Save hundreds on dealership fees by knowing exactly what’s wrong before you visit a shop. The #1 choice car scanner for DIYers and car owners who want to take control of their vehicle’s health
- 【Clear & Reset CEL with Confidence】Unlike cheap code readers that just erase codes temporarily, NT301 works like all professional vehicle code readers: It clears the check engine light only after you’ve fixed the underlying issue. If the problem isn’t fully repaired, the fault code will reappear. So you’ll never get a false pass. Use the foxwell scanner to verify your repair work and drive with peace of mind
- 【Sm-og Check Helper – Know Your Pass/Fail Status Before the Test】With dedicated one-click I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for annual testing. Built-in speaker provides clear audio feedback. No guesswork—just confidence before you head to the test center. One less thing to worry about when inspection day comes
- 【Advanced OBDII Modes – O2 Sensor & EVAP Leak Testing】NT301 go beyond basic code reading with enhanced OBD2 modes. Run an EVAP system leak check to assess fuel tank condition, and use the O2 sensor test to optimize air-fuel ratio, boosting fuel economy, cutting emissions, and saving you money at the pump. The code reader for cars and trucks is like having a mini em-issions lab in your glove box
- 【Live Data Graphing – Spot Engine Issues in Real Time】View and log live sensor data in easy-to-read graphs with this OBD2 scanner diagnostic tool. Monitor oxygen sensors, fuel trims, coolant temperature, RPM, and more to spot suspicious values instantly. This obd scanner gives you professional-grade insight without the pro price tag—a feature you won’t find on basic $20 car code readers
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- [Diagnose Like a Pro] BlueDriver Pro Next-Gen is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
- [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission, and more on supported vehicles, including expanded coverage on newer model years.
- [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
- [Expanded Make & Model Coverage] Optimized for today’s vehicles with strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW. Enhanced communication on select 2024+ Nissan and Mazda models (see compatibility chart).
- [Gas Vehicles 1996+ & Select Light-Duty Trucks] Works with all gas-powered vehicles made in 1996 or newer, plus select light-duty trucks and diesels, including F-250, RAM 2500, Silverado, and Sierra. Built for daily drivers, family vehicles, and real-world truck use.
This product presentation was made with AAWP plugin.