NHTSA ID Number: 10154424
Manufacturer Communication Number: 02-133-12R
Summary
The purpose of this bulletin is to clarify the proper installation direction of the valve springs used on the FA engine. The springs have a light blue paint mark identifier as shown in the chart below.
7 Affected Products
Vehicle
| SUBARU | BRZ | 2013-2019 |
INTRODUCTION
The purpose of this bulletin is to clarify the proper installation direction of the valve springs used on the FA engine. The springs have a light blue paint mark identifier as shown in the chart below.
Important Installation Notes:
- When installing the new type valve spring, the end with the paint mark must always face upward and be against the valve spring retainer.
- Whenever a failed valve spring is identified, all sixteen(16) springs must be replaced AS A SET.
PART INFORMATION
| NEW TYPE | OLD TYPE | |
| Part Name | SPRING-VALVE | ENGINE |
| Part Number | 13217AA521 | 13217AA520 |
| Identification | ||
| Installation Direction | The Light Blue paint mark must install against the spring retainer. | NO |
SEOCONTENT-START
APPLICABILITY: 2013-19 MY BRZ
SUBJECT: Valve Spring Information
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 02-133-12R; Revised: 01/31/19
SEOCONTENT-END
NUMBER: 02-133-12R
DATE: 08/16/12
REVISED: 01/31/19
- Improves Gas Mileage***
- Helps increase engine efficiency
- Protects for 15,000 miles – guaranteed*
- Contains additives to help fight sludge
- Suitable for Hybrid vehicles
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | GM dexos1 Gen 3 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
This product presentation was made with AAWP plugin.