NHTSA ID Number: 10150917
Manufacturer Communication Number: 05-66-18
Summary
This Service Information bulletin announces a running change to the four (4) front suspension crossmember retaining bolts to improve production efficiency. The new bolts have an increased length and are easily identifiable with their ?cone? shape on the threaded end.
2 Affected Products
Vehicle
| SUBARU | IMPREZA | 2018-2019 |
INTRODUCTION:
This Service Information bulletin announces a running change to the four (4) front suspension crossmember retaining bolts to improve production efficiency. The new bolts have an increased length and are easily identifiable with their “cone” shape on the threaded end.
PRODUCTION CHANGE INFORMATION:
The new crossmember bolts were incorporated into production during mid-June, 2018. This bulletin will be revised with the starting VIN when it becomes available.
PART INFORMATION:
The part number for the new bolt is 20008FL00A (qty. 4 per vehicle).
NOTES:
- Crossmember bolts are ONE-TIME USE items and must be replaced whenever loosened or removed.
- When replacing bolts with the new design, It is recommended to replace all 4 as a set.
COMPARISON PHOTOS:
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
These new crossmember bolts have a revised (HIGHER) torque specification of 110 Nm (81.1 ft. lbs.). Otherwise, the Service Procedure for their replacement remains unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
IMPORTANT: While the old design and new design bolts may be used in combination, due to the differences in torque requirements, when replacement is necessary, it is recommended to ensure all 4 bolts being used are the same type in order to eliminate having a mix of both with their different torque requirements during the installation process.
SEOCONTENT-START
APPLICABILITY: 2018-19MY Impreza
SUBJECT: Front Suspension Crossmember Bolt Change
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
SEOCONTENT-END
NUMBER: 05-66-18
DATE: 10/19/18
NUMBER: 05-66-18
DATE: 10/19/18
- 【Vehicle Fitment】 - Position: Front; Compatible with 2010-2014 Su-baru Outback [B14 Body Code]
- 【Suspension Kit Include】 2 x Front Lower Control Arm - ( 522-831 + 522-832 ) Driver & Passenger Side, 2 x Front Lower Ball Joints - K9513, 2 x Front Outer Tie Rod End Links - ES3712, 2 x Front Inner Tie Rod End Links - EV800049, 2 x Front Stabilizer Sway Bar End Links - K750084 , 2 x Rack and Pinion Boots
- 【About Control Arm】 - Control arms allow wheels to move up and down while preventing forward and rearward movement. They are typically equipped with bushings on the frame side of the vehicle and a ball joint on the wheel side of the vehicle that allow flex and controlled movement according to road conditions and steering input from the driver.
- 【Please Note】 - Before placing the order, Please refer to the Vehicle menu (amazonconfirmedfit) at the top left corner, select your vehicle's "Year, Make, Model" and click "Check Fit"to make sure the parts fit your car, or check the product page description to make sure it matches exactly.Any questions please free to contact us and you will get a satisfactory solution.
- 【OEM Part Number】 - K623343 K623344 K750084 EV800049 ES3712 K9513 20202AJ01A 20202AJ01C 20202AJ05A 20202AJ00A 20202AJ00C 20202AJ04A 20420-XA000 45G20688 536-036 20206AJ000 21067GA050 20206SJ000 34141AA041 34141AA042 34141AC010 34141AC0109E 34161SA000 34161SA001 34160AE000 34160AE001 45D2183 X47BJ3874 TC959 JBJ212 CB0355 X47TR3867 83014 46656 CR0575 X47CA0014 X47CA0015 101-5664 101-5238 101-4585 101-4105
- Kit Includes: 2 Rear Lower Rearward Control Arms; 2 Rear Sway Bar Links; 2 Rear Upper Control Arms
- Reference Numbers: 20250 AE01A; 20250AE01A; 20250AE030; 20250AE031; 20250AE03A; 20250AE050; 20250AE051; 20250AE05A; 20250AE09A; 20250AE10A; 20250AG14A; 20250AG15A; 20470 AE000; 20470 AE001; 20470 AE00B; 20470 AE00C; 20470AE000; 20470AE001; 20470AE00A
- YOUR TRUSTED DIY VIDEO SOURCE: TRQ offers the largest catalog of DIY videos for replacement parts, making installation easier and repairs more accessible. Our mission is to help you "View Before You Do," with hundreds of new videos added weekly.
- TRUST & COMPATIBILITY: For over 25 years, TRQ has been the premium choice for direct-fit replacement parts. Confirm fitment with the Amazon Garage "confirmed fit" feature and review our full compatibility chart below before purchase.
- EASE OF INSTALLATION: Save time and effort with pre-assembled components designed as direct replacements for the original equipment, ensuring precise fit and eliminating the need for modifications.
- 【Vehicle Fitment】 - Position: Front; Compatible with 2012-2016 Su-baru Impreza [For H4-2.0L 1995cc Naturally Aspirated]
- 【Suspension Kit Include】 2 x Front Lower Control Arm - ( 524-789 + 524-790 ) Driver & Passenger Side, 2 x Front Lower Ball Joints - K9513, 2 x Front Outer Tie Rod End Links - ES3712, 2 x Front Inner Tie Rod End Links - EV801185, 2 x Front Stabilizer Sway Bar End Links - K750049 , 2 x Rack and Pinion Boots
- 【About Control Arm】 - Control arms allow wheels to move up and down while preventing forward and rearward movement. They are typically equipped with bushings on the frame side of the vehicle and a ball joint on the wheel side of the vehicle that allow flex and controlled movement according to road conditions and steering input from the driver.
- 【Please Note】 - Before placing the order, Please refer to the Vehicle menu (amazonconfirmedfit) at the top left corner, select your vehicle's "Year, Make, Model" and click "Check Fit"to make sure the parts fit your car, or check the product page description to make sure it matches exactly.Any questions please free to contact us and you will get a satisfactory solution.
- 【OEM Part Number】 - 524-789 524-790 K750049 EV801185 ES3712 K9513 20202FJ010 CB72253 20202FJ000 CB72254 20470SA000 20470FE000 20470FE000 34160FJ000 34141AA041 34141AA042 34141AC010 34141AC0109E 34161SA000 34161SA001 20206AJ000 21067GA050 20206SJ000 CMS801193 GS801193 CMS801192 GS801192 45D2183 X47BJ3874 X47CJ6922 X47CJ6991 GK9513 B9513
- [Vehicle Fitment]: Compatible with Subaru Forester 2003-2008 (Naturally Aspirated), Forester 2004-2008 (Turbocharged), Impreza 2004-2005 (Turbocharged), Impreza 2006-2006 (Fit WRX STI & Sedan & Turbocharged), Impreza 2007-2007 (Fit WRX STI Limited & Sedan & Turbocharged) --- A-Premium Forester suspension kit with original dimensions for easy installation
- [Installation Position]: Front & Rear Suspension Left and Right Side
- [Professional Replacement]: This A-Premium front and rear suspension kit is replacement for above model's suspension system, and may help you resolve those problems: ① clunking noise ② steering wander ③ uneven tire wear ④ excessive vibration ⑤ poor handling
- [Specification]: Package Detail: 2 x Rear Sway Bar Links, 2 x Front Sway Bar Links, 2 x Front Lower Ball Joints, 2 x Front Outer Tie Rod Ends, 2 x Front Inner Tie Rod Ends; Reference Part Number: K9513, ES3712, EV800049, K750049, K750041, 32006834, 32010111, 34160AE000, 34160AE001
- [Buy with Confidence]: Our meticulously engineered A-Premium suspension kit is backed by a one-year, unlimited-mileage warranty. We carry a wide range of automotive accessories, allowing you to hit the road with complete peace of mind
- 【Compatibility】K750084 Front Sway Bar End Links Fit for [Subaru] 2006-2007 B9 Tribeca | 2014-2018 Forester (S13 Body Code) | 2016-2017 Crosstrek (G33 Body Code) | 2013-2015 XV Crosstrek (G33 Body Code) | 2010-2014 Outback [B14 Body Code] | 2008-2014 Tribeca (W10 Body Code) | 2015-2019 WRX (V10 Body Code) / WRX STI (V10 Body Code)
- 【Package Includes】2 x Front Stabilizer Bar End Link - K750084
- 【Optimized Vehicle Stability】 Sway bars end link can diminish the degree of vehicle roll during cornering, providing superior stability of the vehicle body when turning or during emergency avoidance maneuvers, thereby enhancing the safety of the vehicle and offering a more comfortable riding experience.
- 【Eliminate noise】 If you experience the following situations, it's time to replace the Sway bars end link: clunking sounds from the suspension on bumpy roads or during turns, body sway while driving, steering wheel pull, and uneven tire wear. Upgrading to our sway bar can resolve these issues, enhancing your driving experience. Plus, our special grease nipple design helps maintain the lubrication of the sway bar, reducing friction-induced noise and increasing driving comfort.
- 【High-quality】 We've specially added a unique blue electroplated design and bushing design, which not only showcases a distinctive luster and texture but also boasts wear resistance, corrosion protection, rust prevention, and dust resistance, safeguarding the sway bar from wear and tear. Regular lubrication through the grease nipple helps reduce friction between the sway bar and bushing, thereby extending the service life of the sway bars end link.
This product presentation was made with AAWP plugin.