NHTSA ID Number: 10201813
Manufacturer Communication Number: 05-79-20R
Summary
This bulletin announces a change made to the wheel lug nuts.
NUMBER: 05-79-20R
DATE: 12/15/20
REVISED: 09/29/21
INTRODUCTION:
This Service Information Bulletin announces a change made to the wheel lug nuts on the models listed above. The change is in response to a number of reports describing rust inside of the nut as shown here in the example photo. A thicker plating surface is now applied during the manufacturing process to prevent rust from developing.
PRODUCTION CHANGE INFORMATION:
The new wheel lug nuts have been incorporated into the the production of Japan built models during July of 2021. This bulletin will be revised with the starting VIN information when it becomes available.
PART INFORMATION:
The new WHEEL NUT part number is 28171AJ001.
NOTE: Any orders placed for the old part numbers 28171AG000 and 28171AJ000 will be automatically switched to the new 28171AJ001 part number.
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Service procedures for wheel nut replacement and their torque value remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. Service Manual procedures contain information critical to performing effective repairs, first time, every time.
51 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| SUBARU | BRZ | 2013-2020 |
| SUBARU | CROSSTREK | 2013-2020 |
| SUBARU | FORESTER | 2010-2020 |
| SUBARU | WRX | 2009-2020 |
| SUBARU | WRX | 2009-2020 |
1 Associated Document
Manufacturer Communications
NUMBER: 05-79-20R
DATE: 12/15/20
REVISED: 09/29/21
MC-10201813-0001.pdf 1047.907KB
NHTSA ID Number: 10185090
Manufacturer Communication Number: 05-79-20
Summary
This Service Information Bulletin announces a change made to the wheel lug nuts.
1 Associated Document
Manufacturer Communications
NUMBER: 05-79-20
DATE: 12/15/20
MC-10185090-0001.pdf 1038.958KB
- Part Name: Hex Wheel Nut
- Part Number: 611-076 09159-12024 28171 AJ000, 28171AG000, 28171FE000
- Compatible with Dorman Subaru
BRZ, Ascent, Crosstrek, Outback, Legacy, Impreza, Forester, DL, Deluxe, Standard, Samurai, Justy, RX, Sidekick, GL; Chevrolet Tracker; Geo Tracker; GMC Tracker; Honda Civic Models - Condition: New, Size: 2.5x1.8x1.8 CM
- Package Includes: Hex Wheel Nut*5
- Do not buy if you're trying to remove your existing wheel locks. The included key is only guaranteed to fit the locks in the kit you buy. Not intended to remove the vehicle's existing wheel lock. This is a replacement set of locks.
- B321SFL001 x1 (Previously B321SFL000)
- 2019-2026 Accent
- 2013-2026 BRZ
- 2013-2026 Crosstrek
- Specification - M12X1.25 thread - closed end bulge style - conical 60-degree seat - 19mm hex, coupled with a silver/chrome finish, not only enhance appearance but also meet stringent industry standards for thread compatibility.
- Adapted Models - Engineered to compatible with Subaru
models, 2016-2023 Crosstrek, 1998-2023 Forester, 1993-2023 Impreza, 1992-2023 Legacy, 2000-2023 Outback. - Enhanced Safety - MIKKUPPA Lug Nuts offer a superior closed end bulge design, ensuring heightened safety and reliability compared to traditional alternatives. With a one-piece construction, they mitigate the risk of cracking or detachment, prioritizing both aesthetics and security for a confident driving experience.
- Durable Construction - Crafted from triple chrome, cold-forged, and heat-treated steel, these lug nuts boast exceptional resistance to oxidation, rusting, and stripping. Their high-strength build ensures longevity and reliability, making them an ideal choice for professional mechanics and enthusiasts alike.
- MIKKUPPA Support - Beyond providing top-quality lug nuts, MIKKUPPA prioritizes customer satisfaction with prompt and reliable service. With addressing inquiries within 24 hours, you can shop with confidence, knowing that your needs are fully supported.
- For Select Subaru
Factory Wheels - Specifications: M12x1.25 Thread Pitch, 0.95” Overall Height, 3/4" Hex, 60° Conical Seating, Dome Top Acorn.
- Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body acorn seat design for fast and easy installation.
- ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
- 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact [email protected] for warranty replacement or fitment issues.
- COMPATIBILITY - These lug nut stud kits are compatible with Subaru
vehicles including Crosstrek WRX
STI
BRZ Forester Outback Legacy Ascent and others, please see below for all fitments information. - MATERIAL - Constructed of high quality 10.9 grade stainless steel, manufactured with heat treated steel for protection against rust and corrosion.
- FEATURES - One piece design with triple chrome plating lug nut and manufactured with heat treated steel to prevent rust and corrosion, wheel stud adopting CNC precise thread design with high intensity.
- REPLACES - Factory Part # 28365FE001 28171AJ000 28171AG000 610-566 28365FE000 611-076 98964.1,etc.
- SPECS - M12x1.25 Thread Pitch; Lug Nut Height: 26.5mm; Hex Size: 19mm; Wheel Stud Length: 48mm
SEOCONTENT-START
Bulletin Number: 05-79-20R; Revised: 09/29/21 Page 1 of 2 Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru
Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru
of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 05-79-20R DATE: 12/15/20 REVISED: 09/29/21 APPLICABILITY: 2013-20MY Crosstrek 2010-20MY Forester 2009-20MY WRX
& WRX
STI
2013-20MY BRZ SUBJECT: Wheel Lug Nuts- Design Change INTRODUCTION: This Service Information Bulletin announces a change made to the wheel lug nuts on the models listed above. The change is in response to a number of reports describing rust inside of the nut as shown here in the example photo. A thicker plating surface is now applied during the manufacturing process to prevent rust from developing. PRODUCTION CHANGE INFORMATION: The new wheel lug nuts have been incorporated into the the production of Japan built models during July of 2021. This bulletin will be revised with the starting VIN information when it becomes available. PART INFORMATION: The new WHEEL NUT part number is 28171AJ001. NOTE: Any orders placed for the old part numbers 28171AG000 and 28171AJ000 will be automatically switched to the new 28171AJ001 part number. REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. SERVICE INFORMATION BULLETIN ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2020 Subaru
of America, Inc. All rights reserved. Bulletin Number: 05-79-20R; Revised: 09/29/21 Page 2 of 2 SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. Service procedures for wheel nut replacement and their torque value remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. Service Manual procedures contain information critical to performing effective repairs, first time, every time. IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





