Wheel Lug Nuts- Design Change – 2009-2020 Subaru

NHTSA ID Number: 10201813

Manufacturer Communication Number: 05-79-20R

Summary

This bulletin announces a change made to the wheel lug nuts.

 


NUMBER: 05-79-20R
DATE: 12/15/20
REVISED: 09/29/21

INTRODUCTION:

This Service Information Bulletin announces a change made to the wheel lug nuts on the models listed above. The change is in response to a number of reports describing rust inside of the nut as shown here in the example photo. A thicker plating surface is now applied during the manufacturing process to prevent rust from developing.

 

PRODUCTION CHANGE INFORMATION:

The new wheel lug nuts have been incorporated into the the production of Japan built models during July of 2021. This bulletin will be revised with the starting VIN information when it becomes available.

 

PART INFORMATION:

The new WHEEL NUT part number is 28171AJ001.

NOTE: Any orders placed for the old part numbers 28171AG000 and 28171AJ000 will be automatically switched to the new 28171AJ001 part number.

REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.

 

SERVICE PROCEDURE / INFORMATION:

REMINDER:  Customer satisfaction and retention starts with performing quality repairs.

Service procedures for wheel nut replacement and their torque value remain unchanged.  Always refer to the applicable Service Manual and review the full requirements of the repair being performed. Service Manual procedures contain information critical to performing effective repairs, first time, every time.

 


51 Affected Products

Vehicles

MAKEMODELYEAR
SUBARUBRZ2013-2020
SUBARUCROSSTREK2013-2020
SUBARUFORESTER2010-2020
SUBARUWRX2009-2020
SUBARUWRX STI2009-2020

 


1 Associated Document

Manufacturer Communications

NUMBER: 05-79-20R
DATE: 12/15/20
REVISED: 09/29/21

MC-10201813-0001.pdf 1047.907KB

 


NHTSA ID Number: 10185090

Manufacturer Communication Number: 05-79-20

Summary

This Service Information Bulletin announces a change made to the wheel lug nuts.

 

1 Associated Document

Manufacturer Communications

NUMBER: 05-79-20
DATE: 12/15/20

MC-10185090-0001.pdf 1038.958KB

 


 

Bestseller No. 1
JZGRDN 5PCS M12-1.25 Acorn-19mm Hex Wheel Nut 611-076 for Dorman Subaru BRZ
  • Part Name: Hex Wheel Nut
  • Part Number: 611-076 ‎09159-12024 28171 AJ000, 28171AG000, 28171FE000
  • Compatible with Dorman Subaru BRZ, Ascent, Crosstrek, Outback, Legacy, Impreza, Forester, DL, Deluxe, Standard, Samurai, Justy, RX, Sidekick, GL; Chevrolet Tracker; Geo Tracker; GMC Tracker; Honda Civic Models
  • Condition: New, Size: 2.5x1.8x1.8 CM
  • Package Includes: Hex Wheel Nut*5
SaleBestseller No. 2
OTUAYAUTO M12x1.25 OEM Lug Nuts, 20PCS Chrome OEM Factory Style Lug Nuts
  • Lug Nut Specification: Height: 0.95"(24.6mm), Conical 60 Degree Tapered, Hex: 3/4"(19mm), Chrome, 20PCS. Recommended Torque: 70-80 Ft/Lbs (minimum 8 full turns required), includes thread gauge verifying ≥8-turn install depth
  • Vehicle Compatibility: Replacement for 2019-2025 Ascent, 2005-2007 B9 Tribeca, 2002-2007 Baja, 2012-2025 Brz, 2013-2025 Crosstrek, 1997-2025 Forester, 1992-2025 Impreza, 1989-2025 Legacy, 1994-2025 Outback, 2022-2025 Solterra, 1992-1997 Six, 2005-2014 Tribeca, 2014-2025 Wrx, 2012-2025 Wrx Sti, 2014-2025 Xv, 2013-2017 Xv Crosstrek
  • Corrosion Resistance: Lug nuts Cold-forged from 10.9 Grade SCM heat treated steel, certified to 72hr ASTM B117 salt spray standard. 3-layer chrome plating resists rust/oxidation/chemical erosion. Compatible with polar cold, desert heat & de-icing agents
  • Purchase Guide: For Factory OEM Stock Limit Only. Do Not Capable for Wheel Caps. Please use Confirmed Fit at the top to check. If your car is not Included, please reach out for further confirmation
  • About OTUAYAUTO: OTUAYAUTO offers 12-month worry-free coverage on wheel lug nuts, backed by 24/7 dedicated support and seamless installation guidance to elevate your automotive maintenance journey
Bestseller No. 3
JZGRDN 2PCS M12-1.25 Acorn-19mm Hex Wheel Nut 611-076 for Dorman Subaru BRZ
  • Part Name: Hex Wheel Nut
  • Part Number: 611-076 ‎09159-12024 28171 AJ000, 28171AG000, 28171FE000
  • Compatible with Dorman Subaru BRZ, Ascent, Crosstrek, Outback, Legacy, Impreza, Forester, DL, Deluxe, Standard, Samurai, Justy, RX, Sidekick, GL; Chevrolet Tracker; Geo Tracker; GMC Tracker; Honda Civic Models
  • Condition: New, Size: 2.5x1.8x1.8 CM
  • Package Includes: Hex Wheel Nut*2
Bestseller No. 4
MIKKUPPA M12x1.25 Lug Nuts 20PCS, Replacement for Subaru Factory Wheels
  • Specification - M12X1.25 thread - closed end bulge style - conical 60-degree seat - 19mm hex, coupled with a silver/chrome finish, not only enhance appearance but also meet stringent industry standards for thread compatibility.
  • Adapted Models - Engineered to compatible with Subaru models, 2016-2023 Crosstrek, 1998-2023 Forester, 1993-2023 Impreza, 1992-2023 Legacy, 2000-2023 Outback.
  • Enhanced Safety - MIKKUPPA Lug Nuts offer a superior closed end bulge design, ensuring heightened safety and reliability compared to traditional alternatives. With a one-piece construction, they mitigate the risk of cracking or detachment, prioritizing both aesthetics and security for a confident driving experience.
  • Durable Construction - Crafted from triple chrome, cold-forged, and heat-treated steel, these lug nuts boast exceptional resistance to oxidation, rusting, and stripping. Their high-strength build ensures longevity and reliability, making them an ideal choice for professional mechanics and enthusiasts alike.
  • MIKKUPPA Support - Beyond providing top-quality lug nuts, MIKKUPPA prioritizes customer satisfaction with prompt and reliable service. With addressing inquiries within 24 hours, you can shop with confidence, knowing that your needs are fully supported.
Bestseller No. 5
Mysttoo 4PCS M12x1.25 Chrome Wheel Lug Stud Nut Set 28365FE001 Compatible with Subaru Forester Crosstrek Outback WRX STI Legacy Impreza BRZ Tribeca Ascent Scion FR-S # 28171AJ000
119 Reviews
Mysttoo 4PCS M12x1.25 Chrome Wheel Lug Stud Nut Set 28365FE001 Compatible with Subaru Forester Crosstrek Outback WRX STI Legacy Impreza BRZ Tribeca Ascent Scion FR-S # 28171AJ000
  • COMPATIBILITY - These lug nut stud kits are compatible with Subaru vehicles including Crosstrek WRX STI BRZ Forester Outback Legacy Ascent and others, please see below for all fitments information.
  • MATERIAL - Constructed of high quality 10.9 grade stainless steel, manufactured with heat treated steel for protection against rust and corrosion.
  • FEATURES - One piece design with triple chrome plating lug nut and manufactured with heat treated steel to prevent rust and corrosion, wheel stud adopting CNC precise thread design with high intensity.
  • REPLACES - Factory Part # 28365FE001 28171AJ000 28171AG000 610-566 28365FE000 611-076 98964.1,etc.
  • SPECS - M12x1.25 Thread Pitch; Lug Nut Height: 26.5mm; Hex Size: 19mm; Wheel Stud Length: 48mm

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...