Accessory Installation Guide
2022MY WRX Ultrasuede Center Console Trim Panels (6MT) | J1310VC626 |
Center Console Trim Panels – Ultrasuede 6MT
Installation Manual
Genuine Part Number: J1310VC626
Applicable Model: WRX (2022MY～)
For Installation Operator
This manual describes how to install and handle the Center Console Trim Panels.
Please make sure to read this manual before installation for the correct installation.
Please hand this manual to the customer after the installation.
Precautions
1. For your safety, stop the vehicle on a flat place, turn off the engine switch and ensure that the parking brake is applied before starting the installation process.
2. Since connector to be detached and attached, make sure to disconnect the power cord of battery (-) negative side before handling electrical components such as the connector. Follow the instructions in the latest service manual for removing and installing the cord of (-) negative side.
3. When installing, be careful not to damage the vehicle and the Center Console Trim Panels parts with tools.
4. Follow the items described using Caution mark in the “Installation procedure” on the following pages for installation.
Tools to be used
- Handy remover
- Phillips screwdriver
- Socket Wrench (M10)
Installation procedure
Caution:
Remove the ground terminal from the battery before handling electrical components.
Refer to the service manual for how to remove the battery terminal.
Reference:
Set the shift lever to “N” position before removing the negative terminal of the battery.
Please move the seat to the front most position before removing the negative terminal of the battery.
1. Remove Cover ASSY Front.
（1）Remove Shift Lever.
（2）Remove Tray ASSY Center Lower. （FIG.2）
（3）Remove Handbrake Boots while the Handbrake is being pulled.
（4）Open Console Lid, and pull up Cover ASSY Front, then disengage the clip.
（5）Disconnect each connector and remove Cover ASSY Front.（FIG.3）
Caution
When removing parts, be careful not to damage the joints.
2. Remove Console Box ASSY from Vehicle.
（1）Remove the screw fixing Console Box and Center Console.（FIG.4）
（2）Remove the cap on the Console Box ASSY Side and remove the bolt.（FIG.5）
（3）Disconnect each connector, and pull up Console Box, then disengage the clip.
Caution
: When removing parts, be careful not to damage the joints.
: Keep the removed screws and bolts in a safe place as they will be used when assembling.
3. Remove Cover ASSY Center Side from Instrument Panel.
（1）Remove Vehicle body fixing screw behind Shift Lever.（FIG.6）
（2）Remove Claw engagement in the square part in the illustration, and separate RH and LH on the Cover ASSY Center Side.
（3）Pull each RH and LH on the Cover ASSY Center Side backward, and detach engagement between the Clip and Resin Claw, then separate it from Instrument Panel.（FIG.7）
Caution
: When removing parts, be careful not to damage the joints.
: Keep the removed screws and bolts in a safe place as they will be used when assembling.
4. Remove screw（1place）and clip engagements（3 places）, pull up diagonally upward, and remove Center Console Trim Panels from Cover ASSY Center Side.（FIG.8）
Caution
: When removing parts, be careful not to damage the joints.
: Keep the removed screws and bolts in a safe place as they will be used when assembling.
The illustration shows RH. Remove the part of LH in the same way.
5. Install the packaged ①Center Console Trim Panels LH and ②Center Console Trim Panels in the reverse order of removal from Cover ASSY Center Side.
6. Install Cover ASSY Center side in the reverse order of removal from the Instrument Panel.
7. Install the Console Box ASSY in the reverse order of removal from the vehicle.
8. Cover ASSY Front, Handbrake Boots, Tray ASSY Center Lower and Shift Lever shall be restored in the reverse order of removal. Then the installation to be completed.
J1310VC626
2022MY WRX Ultrasuede Center Console Trim Panels (6MT)
- Car Model: Fit for 2020 2021 2022 2023 2024 2025 Subaru Outback accessories, fit for 2020 2021 2022 2023 2024 2025 Subaru Legacy accessories, please check your gear shift panel before buying
- Material: Made of ABS plastic and matte black surface
- Feature: The center console panel cover improves your car's appearance and makes the car more fashionable, this is not a replacement part, just a cover on the original part
- Installation: Back with adhesive tapes, no damage to your car. Wipe clean original car gear shift panel before installation, and heat the tape a little for better adhesion
- Package: Each package includes 1 pcs for Subaru Outback Legacy Accessories
- 【Perfect Fit】INTGET panel trim cover with extra button hole fits for 2020 2021 2022 2023 2024 2025 Subaru Outback accessories (Inluding trim level: Onyx Edition XT, Wilderness, Touring, Limited XT, Touring XT ); for 2020 2021 2022 2023 2024 2025 Subaru Legacy accessories (Inluding trim level: Touring XT); (NOTE: There is 2 version of the panel cover, please double check the photos before purchase.)
- 【Matte Black Texture】Made of high quality ABS plastic for 2025 Subaru Legacy accessories, which has high strength and good toughness. It is not easy to leave scratches on it, and the stains are easily wiped off.
- 【No Harm Design】This gear panel cover for 2025 Subaru Outback Wilderness is easy to stick and will not damage your Outback for sure. It will not break or crack easily during use.
- 【Decor Upgraded】With a bright and Stylish look, this interior decoration cover for 2025 Subaru Outback change the original ordinary interior and adding an unique flavor.
- 【Package Includes】1 X Matte Black Gear Panel Cover (WITHOUT Button Hole). If you have any questions, please let us know and we are happy to help you out.
- 【Perfect Fit for Crosstre/Impreza】INTGET GPS Screen Trim Cover fits for 2024 2025 2026 Subaru Crosstrek accessories Premium/Sport/Limited/Wilderness; for 2024 2025 2026 Subaru Impreza accessories Sport/RS; Please make sure this center console display frame sticker fits your car.
- 【Premium Material】Made of high quality ABS plastic for 2024 Subaru Crosstrek interior accessories, which has high strength and good toughness. It is not easy to leave scratches on it, and the stains are easily wiped off.
- 【No Harm Design】This car interior accessory for 2024 Subaru Crosstrek Wilderness is easy to stick and will not damage your Subaru for sure. It will not break or crack easily during use.
- 【Decor Upgraded】With a bright and Stylish look, this interior decoration protector for Subaru Crosstrek 2024 change the original ordinary interior and adding an unique flavor.
- 【Easy to Install】Just stick the cover on the panel’s surface (better to heat the double-sided tapes before installation for better adhesion), and press it hardly, do not touch within 24 hours. If you have any questions, please let us know and we are happy to help you out.
- Car Model: Fit for 2023 2024 2025 Subaru Crosstrek Accessories, fit for 2023 2024 2025 Subaru Impreza Accessories, please check your gear shift panel before buying
- Material: Made of ABS plastic and matte black surface
- Feature: The center console panel cover improves your car's appearance and makes the car more fashionable, this is not a replacement part, just a cover on the original part
- Installation: Back with adhesive tapes, no damage to your car. Wipe clean original car gear shift panel before installation, and heat the tape a little for better adhesion
- Package: Each package includes 2 pcs for Subaru Crosstrek Impreza Accessories
- Compatible - Fit for 2026 Subaru Outback.
- Design Style - Provides a high class and sport decor style for your car, change the ordinary interior design of the car and add unique colors, the trim can cover existing scratches and prevent your car from scratch and abrasion
- Material - Made of high quality ABS plastic material , Three-layer processing:Background paint,pattern paint,Transparent UV in great finished (not Real carbon fiber)
- Easy Installation - With Double-sided adhesive tape, pls cleaning surface with Alcohol, heat the tape by a hair dryer for better adhesion,and press it almost 1 minute
- Satisfaction Guarantee - If you're not 100% feel satisfied with item, simply return it for a refund in 30 days, no questions asked money back
SEOCONTENT-START
Center Console Trim Panels – Ultrasuede 6MT Installation Manual Component Part No. Center Console Trim Panels LH Center Console Trim Panels RH 1 1 No. ① ② ！ J1310VC626 WRX （2022MY～） Genuine Part Number ： Applicable Model ： Component Part For Installation Operator Precautions Tools to be used Completion drwing Quantity 1. For your safety, stop the vehicle on a flat place, turn off the engine switch and ensure that the parking brake is applied before starting the installation process. 2. Since connector to be detached and attached, make sure to disconnect the power cord of battery (-) negative side before handling electrical components such as the connector. Follow the instructions in the latest service manual for removing and installing the cord of (-) negative side. 3. 4. This manual describes how to install and handle the Center Console Trim Panels. Please make sure to read this manual before installation for the correct installation. Please hand this manual to the customer after the installation. ・ Handy remover ・ Phillips screwdriver When installing, be careful not to damage the vehicle and the Center Console Trim Panels parts with tools. Follow the items described using mark in Caution the “Installation procedure” on the following pages for installation. １ △00 Ultrasuede is a registered trademark of Toray Industries, Inc. Manufacturer CORPORATION ② Center Console Trim Panels RH ① Center Console Trim Panels LH ・ Socket Wrench （M10） ２ Installation procedure 1. Remove Cover ASSY Front. （1）Remove Shift Lever. （2）Remove Tray ASSY Center Lower.（FIG.2） （3）Remove Handbrake Boots while the Handbrake is being pulled. （4）Open Console Lid, and pull up Cover ASSY Front, then disengage the clip. （5）Disconnect each connector and remove Cover ASSY Front.（FIG.3） When removing parts, be careful not to damage the joints. Tray ASSY Center LWR Cover ASSY Front 【FIG.1】 【FIG.2】 【FIG.3】 Handbreak Boots Console Lid Tray Assy Center LWR Shift Lever Cover ASSY Front Handbreak Caution ：Remove the ground terminal from the battery before handling electrical components. Refer to the service manual for how to remove the battery terminal. Reference : Set the shift lever to “N” position before removing the negative terminal of the battery. Please move the seat to the front most position before removing the negative terminal of the battery. Caution Shift Lever “Ｎ” position 【FIG.4】 【FIG.5】 【FIG.6】 【FIG.7】 Console Box Screw Screw ※Clip and resin hook are symmetrical Back side Resin hook Clip Fixing portion to Vehicle body Center Console 3 2. Remove Console Box ASSY from Vehicle. 3. Remove Cover ASSY Center Side from Instrument Panel. （1）Remove the screw fixing Console Box and Center Console.（FIG.4） （2）Remove the cap on the Console Box ASSY Side and remove the bolt.（FIG.5） （3）Disconnect each connector, and pull up Console Box, then disengage the clip. （1）Remove Vehicle body fixing screw behind Shift Lever.（FIG.6） （2）Remove Claw engagement in the part in the illustration, and separate RH and LH on the Cover ASSY Center Side. （3）Pull each RH and LH on the Cover ASSY Center Side backward, and detach engagement between the Clip and Resin Claw, then separate it from Instrument Panel. （FIG.7） : When removing parts, be careful not to damage the joints. : Keep the removed screws and bolts in a safe place as they will be used when assembling. Caution : When removing parts, be careful not to damage the joints. : Keep the removed screws and bolts in a safe place as they will be used when assembling. Caution 3 【FIG.8】 : When removing parts, be careful not to damage the joints. : Keep the removed screws and bolts in a safe place as they will be used when assembling. Caution 4. Remove screw（1place）and clip engagements（3places）, pull up diagonally upward, and remove Center Console Trim Panels from Cover ASSY Center Side.（FIG.8） The illustration shows RH.Remove the part of LH in the same way. 5. Install the packaged ①Center Console Trim Panels LH and ②Center Console Trim Panels in the reverse order of removal from Cover ASSY Center Side. 6. Install Cover ASSY Center side in the reverse order of removal from the Instrument Panel. 7. Install the Console Box ASSY in the reverse order of removal from the vehicle. 8. Cover ASSY Front, Handbrake Boots, Tray ASSY Center Lower and Shift Lever shall be restored in the reverse order of removal. Then the installation to be completed. Center Console Trim Panels Screw Clip
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.