Accessory Installation Guide
| 2022MY WRX | C1010VC100 |
Shift knob (aluminum and leather) 6MT
Application and Instruction Manual
- Thank you for purchasing this product.
- This document explains how to apply and handle the product.
It also provides important cautions to be observed.
- Read these safety cautions thoroughly before using the product, and use the product correctly as indicated.
- Keep this document in the glove box and refer to it if you have any questions.
Important points are noted with the following symbols. Observe any instructions or cautionary information marked with these symbols.
| Warning | These instructions must be observed to safely use the product.
[Improper handling may result in death or serious injury] |
| Caution | These instructions must be observed to safely use the product and to protect the vehicle.[Improper handling may result in injury or an accident] |
| ※Advice | This symbol is used to note helpful information. |
| Warning |
Doing so could cause serious damage to the product.
Continuing to use the vehicle may lead to damage or an accident.
|
| Caution |
Do not use the product for purposes other than that for which it is intended. Doing so could result in damage to the product or cause an accident.
|
| ※Advice |
|
Installation procedure
1. Part number and applicable model
| Part number | Part name | Applicable model |
| C1010VC100 | Shift knob
(aluminum and leather) 6MT | S4 6MT* |
*:S4 6MT(size:12 mm (0.47 inch)、pitch:1.25 mm (0.049 inch))
2. Component part
| Component part | quantity |
| Shift knob | 1 |
*Please check the number of parts.
In case, please contact your dealer if there is a shortage or differences.
3. Specification
- The ornament on the top is an alumite applied to the aluminum pressed product, and the pattern and STI
letters are dented and colored.
In addition, the upper part of the knob body is wrapped in denple black leather, and the lower part is a 6MT dedicated shift knob that has been blasted using aluminum material and finished with alumite treatment.
| Warning |
| For your safety, be sure to stop the engine and turn off the ignition. |
4. Work procedure
- Remove the genuine shift knob.
- Tighten the STI
shift knob to a position where it can be securely fixed. (As a guide, tighten the shift knob comfortably and then tighten it about half a turn to one turn from where it stopped.) - If the shift pattern on the top of the shift knob does not face the front, adjust in the additional tightening direction.
Handling Precautions
- The shift knob may become hot or cold depending on the temperature and sunshine conditions.
In that case, please wear driving gloves.
- If the shift knob is tightened more than necessary, the threaded part may be damaged.
C1010VC100
- Durable Material: Made of quality ABS and soft leather with rust-proof feature for long-lasting use.
- Easy Installation: Remove the old gear shift knob and install the new one with simple push and twist action.
- Stylish Design: Beautiful black leather cover adds a touch of luxury and style to your car.
- Improved Grip: Less effort required to grip the shifter into place for better control during driving.
- Warranty and Support: 30 days warranty and easy return policy for peace of mind purchase.
- Genuine Subaru
STi
Shift Knob - 35022VA010
- Came factory original on 2015-2021 STi

- Will Fit Any 6-Speed Manual Transmission Subaru
Vehicle
- 【Durable Material】: Our shift knob are made of high quality leather and aluminum material. It's soft, sweat-absorbent, non-slip and hard-wearing for a comfortable driving experience and better grip. Good workmanship to offer you a long service time and also make your car both upscale and stylish.
- 【Exquisite Design】: This manual knob shifter is beautiful and stylish in design with elegant stripes to add a cool touch to your ride. Ergonomically designed gear shifter with durable wear resistant leather and carbon fiber pattern surface. Perfect upgrade option for your assembly shift lever.
- 【Easy to Install】: This shift knob comes with 3 rubber adapters, very easy to install. You need just remove the original shifter, and take off the bottom aluminum alloy sleeve of the shifter head, then choose the appropriate adapter size and turn the rubber sleeve into the gear lever.
- 【Universal Fit Size】: The shift knob suitable for most vehicle requirements, such as car, SUV, truck, ATV, etc.. It can apply to most Manual Transmission (MT), without button, but this gear shift is not suitable for those vehicles with the reverse gear next to the 1st gear.
- 【Package Includes】: There are 1 pc shift knob, 1 pc Allen key, 4 pcs small screws and 3 different plastic threaded adapters of stick shift knob inner diameter are 0.31inch, 0.39inch, 0.47inch (8mm,10mm,12mm), available for your choice. Meet your different needs.
- Compatible With: For Subaru
BRZ 2013-2020; For Toyota 86 2013-2020; For SCION FR-S 2013-2016. - Quality wear: resistant leather & ABS material made, non-slip and no fade. The gear shifter knob can enhance the connection with your car and restores a good driving experience, when you use the shift knob to shift gear everytime.
- Comfortable Driving: transmission shifter lever conforms to ergonomic design, providing a comfortable grip and good handling, giving you a better driving experience.
- Features: Easy install Simple operation and reliable installation.
- Package Included: 1PC Manual Gear Shift Knob
- 【Perfect Fits For】Shift knob head replacement for Subaru
WRX
STI
2015-2022 - 【Comfortable Material】Made of quality ABS and soft leather with silky touch. It can improve your driving experience and manipulative sense
- 【 Quality leather style】Beautiful black leather cover for your car, making it looks more distinctive and symbolizing your taste
- 【Easy Installation】Take the old gear shift knob off and remove then push and twist the new one on. No special tools required for installation
- 【Nice Replacement】Less effort is required by the driver to grip the shifter into place with our car gear shifter knob
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





